diff options
Diffstat (limited to 'arch/arm/mach-at91')
| -rw-r--r-- | arch/arm/mach-at91/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/mach-at91/at91rm9200_devices.c | 45 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-1arm.c | 26 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-kafa.c | 21 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-picotux200.c | 53 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-rm9200dk.c (renamed from arch/arm/mach-at91/board-dk.c) | 4 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-rm9200ek.c (renamed from arch/arm/mach-at91/board-ek.c) | 4 | ||||
| -rw-r--r-- | arch/arm/mach-at91/board-yl-9200.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/board.h | 6 |
9 files changed, 40 insertions, 125 deletions
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 821eb842795..62d686f0b42 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o -obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o +obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o obj-$(CONFIG_MACH_CSB637) += board-csb637.o obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9338825cfcd..7b539228e0e 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins) static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91rm9200_uart0_device; - at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91rm9200_uart1_device; - at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91rm9200_uart2_device; - at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91rm9200_uart3_device; - at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91rm9200_dbgu_device; - at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 46bdc82d3fb..8a3fc84847c 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,24 +39,24 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata onearm_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ -}; - static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); - /* Setup the serial ports and console */ - at91_init_serial(&onearm_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init onearm_init_irq(void) diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index c0ce79d431a..d2e1f4ec1fc 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,17 +39,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata kafa_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init kafa_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -58,8 +47,14 @@ static void __init kafa_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Setup the serial ports and console */ - at91_init_serial(&kafa_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init kafa_init_irq(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 9d833bbc592..55dad3a4654 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,24 +43,21 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata picotux200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init picotux200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); - /* Setup the serial ports and console */ - at91_init_serial(&picotux200_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init picotux200_init_irq(void) @@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .ports = 1, }; -// static struct at91_udc_data __initdata picotux200_udc_data = { -// .vbus_pin = AT91_PIN_PD4, -// .pullup_pin = AT91_PIN_PD5, -// }; - static struct at91_mmc_data __initdata picotux200_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, @@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = { .wp_pin = AT91_PIN_PA17, }; -// static struct spi_board_info picotux200_spi_devices[] = { -// { /* DataFlash chip */ -// .modalias = "mtd_dataflash", -// .chip_select = 0, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -// { /* DataFlash card */ -// .modalias = "mtd_dataflash", -// .chip_select = 3, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #endif -// }; - #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 #define PICOTUX200_FLASH_SIZE SZ_4M @@ -135,21 +112,11 @@ static void __init picotux200_board_init(void) at91_add_device_eth(&picotux200_eth_data); /* USB Host */ at91_add_device_usbh(&picotux200_usbh_data); - /* USB Device */ - // at91_add_device_udc(&picotux200_udc_data); - // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ at91_add_device_i2c(NULL, 0); - /* SPI */ - // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(0, &picotux200_mmc_data); -#endif /* NOR Flash */ platform_device_register(&picotux200_flash); } diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-rm9200dk.c index e14f0e16568..4c1047c8200 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-dk.c + * linux/arch/arm/mach-at91/board-rm9200dk.c * * Copyright (C) 2005 SAN People * @@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = { // .vcc_pin = ... always powered }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata dk_mmc_data = { .slot_b = 0, .wire4 = 1, }; +#endif static struct spi_board_info dk_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 56e92c4bbc2..9df1be8818c 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-ek.c + * linux/arch/arm/mach-at91/board-rm9200ek.c * * Copyright (C) 2005 SAN People * @@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = AT91_PIN_PD5, }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata ek_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, }; +#endif static struct spi_board_info ek_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 89df00a9d2f..e0f0080eb63 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = { * EPSON S1D13806 FB (discontinued chip) * EPSON S1D13506 FB */ -#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include <video/s1d13xxxfb.h> diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 58528aa9c8a..2b499eb343a 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); extern void __init at91_set_serial_console(unsigned portnr); -struct at91_uart_config { - unsigned short console_tty; /* tty number of serial console */ - unsigned short nr_tty; /* number of serial tty's */ - short tty_map[]; /* map UART to tty number */ -}; extern struct platform_device *atmel_default_console_device; -extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ |