diff options
Diffstat (limited to 'arch/arm/mach-bcmring/include/csp/dmacHw.h')
| -rw-r--r-- | arch/arm/mach-bcmring/include/csp/dmacHw.h | 596 |
1 files changed, 0 insertions, 596 deletions
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h deleted file mode 100644 index e6a1dc484ca..00000000000 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ /dev/null @@ -1,596 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw.h -* -* @brief API definitions for low level DMA controller driver -* -*/ -/****************************************************************************/ -#ifndef _DMACHW_H -#define _DMACHW_H - -#include <stddef.h> - -#include <csp/stdint.h> -#include <mach/csp/dmacHw_reg.h> - -/* Define DMA Channel ID using DMA controller number (m) and channel number (c). - - System specific channel ID should be defined as follows - - For example: - - #include <dmacHw.h> - ... - #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5) - #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0) - #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1) - #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3) - #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4) - ... - #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4) - #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5) - #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6) - ... -*/ -#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c) - -typedef enum { - dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */ - dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */ - dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */ - dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */ - dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */ - dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */ - dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */ - dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */ -} dmacHw_CHANNEL_PRIORITY_e; - -/* Source destination master interface */ -typedef enum { - dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */ - dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */ - dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */ - dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */ -} dmacHw_MASTER_INTERFACE_e; - -typedef enum { - dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */ -} dmacHw_TRANSACTION_WIDTH_e; - -typedef enum { - dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */ - dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */ - dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ -} dmacHw_BURST_WIDTH_e; - -typedef enum { - dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */ - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */ - dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */ - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */ -} dmacHw_TRANSFER_TYPE_e; - -typedef enum { - dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */ - dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */ - dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */ -} dmacHw_TRANSFER_MODE_e; - -typedef enum { - dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */ - dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */ - dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */ -} dmacHw_ADDRESS_UPDATE_MODE_e; - -typedef enum { - dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */ - dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */ -} dmacHw_FLOW_CONTROL_e; - -typedef enum { - dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */ - dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */ - dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */ -} dmacHw_TRANSFER_STATUS_e; - -typedef enum { - dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */ - dmacHw_INTERRUPT_ENABLE /* Interrupt enable */ -} dmacHw_INTERRUPT_e; - -typedef enum { - dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */ - dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */ - dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */ - dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */ -} dmacHw_INTERRUPT_STATUS_e; - -typedef enum { - dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */ - dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */ -} dmacHw_CONTROLLER_ATTRIB_e; - -typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */ -typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using - "dmacHw_MAKE_CHANNEL_ID" macro - */ -/* DMA channel configuration parameters */ -typedef struct { - uint32_t srcPeripheralPort; /* Source peripheral port */ - uint32_t dstPeripheralPort; /* Destination peripheral port */ - uint32_t srcStatusRegisterAddress; /* Source status register address */ - uint32_t dstStatusRegisterAddress; /* Destination status register address of type */ - - uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */ - uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */ - uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */ - uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */ - uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor. - 0 = Maximum possible. - */ - - dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */ - dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */ - dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */ - dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */ - dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */ - dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */ - dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */ - dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */ - dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */ - dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */ - dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */ - dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */ - dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */ - dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */ - dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */ -} dmacHw_CONFIG_t; - -/****************************************************************************/ -/** -* @brief Initializes DMA -* -* This function initializes DMA CSP driver -* -* @note -* Must be called before using any DMA channel -*/ -/****************************************************************************/ -void dmacHw_initDma(void); - -/****************************************************************************/ -/** -* @brief Exit function for DMA -* -* This function isolates DMA from the system -* -*/ -/****************************************************************************/ -void dmacHw_exitDma(void); - -/****************************************************************************/ -/** -* @brief Gets a handle to a DMA channel -* -* This function returns a handle, representing a control block of a particular DMA channel -* -* @return -1 - On Failure -* handle - On Success, representing a channel control block -* -* @note -* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */ - ); - -/****************************************************************************/ -/** -* @brief Initializes a DMA channel for use -* -* This function initializes and resets a DMA channel for use -* -* @return -1 - On Failure -* 0 - On Success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Estimates number of descriptor needed to perform certain DMA transfer -* -* -* @return On failure : -1 -* On success : Number of descriptor count -* -* -*/ -/****************************************************************************/ -int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Data length in bytes */ - ); - -/****************************************************************************/ -/** -* @brief Initializes descriptor ring -* -* This function will initializes the descriptor ring of a DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* @note -* - "len" parameter should be obtained from "dmacHw_descriptorLen" -* - Descriptor buffer MUST be 32 bit aligned and uncached as it -* is accessed by ARM and DMA -*/ -/****************************************************************************/ -int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */ - uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */ - uint32_t len, /* [ IN ] Size of the pBuf */ - uint32_t num /* [ IN ] Number of descriptor in the ring */ - ); - -/****************************************************************************/ -/** -* @brief Finds amount of memory required to form a descriptor ring -* -* -* @return Number of bytes required to form a descriptor ring -* -* -* @note -* None -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */ - ); - -/****************************************************************************/ -/** -* @brief Configure DMA channel -* -* @return 0 : On success -* -1 : On failure -*/ -/****************************************************************************/ -int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */ - ); - -/****************************************************************************/ -/** -* @brief Set descriptors for known data length -* -* When DMA has to work as a flow controller, this function prepares the -* descriptor chain to transfer data -* -* from: -* - Memory to memory -* - Peripheral to memory -* - Memory to Peripheral -* - Peripheral to Peripheral -* -* @return -1 - On failure -* 0 - On success -* -*/ -/****************************************************************************/ -int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Length in bytes */ - ); - -/****************************************************************************/ -/** -* @brief Indicates whether DMA transfer is in progress or completed -* -* @return DMA transfer status -* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing -* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed -* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error -* -*/ -/****************************************************************************/ -dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Set descriptor carrying control information -* -* This function will be used to send specific control information to the device -* using the DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t ctlAddress, /* [ IN ] Address of the device control register */ - uint32_t control /* [ IN ] Device control information */ - ); - -/****************************************************************************/ -/** -* @brief Read data DMA transferred to memory -* -* This function will read data that has been DMAed to memory while transferring from: -* - Memory to memory -* - Peripheral to memory -* -* @return 0 - No more data is available to read -* 1 - More data might be available to read -* -*/ -/****************************************************************************/ -int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void **ppBbuf, /* [ OUT ] Data received */ - size_t *pLlen /* [ OUT ] Length of the data received */ - ); - -/****************************************************************************/ -/** -* @brief Prepares descriptor ring, when source peripheral working as a flow controller -* -* This function will form the descriptor ring by allocating buffers, when source peripheral -* has to work as a flow controller to transfer data from: -* - Peripheral to memory. -* -* @return -1 - On failure -* 0 - On success -* -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t srcAddr, /* [ IN ] Source peripheral address */ - void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */ - int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */ - int num /* [ IN ] Number of descriptor to set */ - ); - -/****************************************************************************/ -/** -* @brief Program channel register to initiate transfer -* -* @return void -* -* -* @note -* - Descriptor buffer MUST ALWAYS be flushed before calling this function -* - This function should also be called from ISR to program the channel with -* pending descriptors -*/ -/****************************************************************************/ -void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Resets descriptor control information -* -* @return void -*/ -/****************************************************************************/ -void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Program channel register to stop transfer -* -* Ensures the channel is not doing any transfer after calling this function -* -* @return void -* -*/ -/****************************************************************************/ -void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Check the existence of pending descriptor -* -* This function confirmes if there is any pending descriptor in the chain -* to program the channel -* -* @return 1 : Channel need to be programmed with pending descriptor -* 0 : No more pending descriptor to programe the channel -* -* @note -* - This function should be called from ISR in case there are pending -* descriptor to program the channel. -* -* Example: -* -* dmac_isr () -* { -* ... -* if (dmacHw_descriptorPending (handle)) -* { -* dmacHw_initiateTransfer (handle); -* } -* } -* -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Deallocates source or destination memory, allocated -* -* This function can be called to deallocate data memory that was DMAed successfully -* -* @return -1 - On failure -* 0 - On success -* -* @note -* This function will be called ONLY, when source OR destination address is pointing -* to dynamic memory -*/ -/****************************************************************************/ -int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */ - ); - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the DMA channel specific interrupt -* -* @return N/A -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Returns the cause of channel specific DMA interrupt -* -* This function returns the cause of interrupt -* -* @return Interrupt status, each bit representing a specific type of interrupt -* of type dmacHw_INTERRUPT_STATUS_e -* @note -* This function should be called under the context of ISR -*/ -/****************************************************************************/ -dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Indentifies a DMA channel causing interrupt -* -* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e -* -* @return NULL : No channel causing DMA interrupt -* ! NULL : Handle to a channel causing DMA interrupt -* @note -* dmacHw_clearInterrupt() must be called with a valid handle after calling this function -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getInterruptSource(void); - -/****************************************************************************/ -/** -* @brief Sets channel specific user data -* -* This function associates user data to a specific DMA channel -* -*/ -/****************************************************************************/ -void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *userData /* [ IN ] User data */ - ); - -/****************************************************************************/ -/** -* @brief Gets channel specific user data -* -* This function returns user data specific to a DMA channel -* -* @return user data -*/ -/****************************************************************************/ -void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Displays channel specific registers and other control parameters -* -* -* @return void -* -* @note -* None -*/ -/****************************************************************************/ -void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ - ); - -/****************************************************************************/ -/** -* @brief Provides DMA controller attributes -* -* -* @return DMA controller attributes -* -* @note -* None -*/ -/****************************************************************************/ -uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */ - ); - -#endif /* _DMACHW_H */ |