summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci/Kconfig')
-rw-r--r--arch/arm/mach-davinci/Kconfig59
1 files changed, 59 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 40866c643f1..033bfede6b6 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -32,11 +32,13 @@ config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
+ select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
+ select ARCH_HAS_CPUFREQ
config ARCH_DAVINCI_DA8XX
bool
@@ -63,6 +65,13 @@ config MACH_SFFSDR
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
+config MACH_NEUROS_OSD2
+ bool "Neuros OSD2 Open Television Set Top Box"
+ depends on ARCH_DAVINCI_DM644x
+ help
+ Configure this option to specify the whether the board used
+ for development is a Neuros OSD2 Open Set Top Box.
+
config MACH_DAVINCI_DM355_EVM
bool "TI DM355 EVM"
default ARCH_DAVINCI_DM355
@@ -98,16 +107,66 @@ config MACH_DAVINCI_DA830_EVM
bool "TI DA830/OMAP-L137 Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
+ select GPIO_PCF857X
help
Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
+choice
+ prompt "Select DA830/OMAP-L137 UI board peripheral"
+ depends on MACH_DAVINCI_DA830_EVM
+ help
+ The presence of UI card on the DA830/OMAP-L137 EVM is detected
+ automatically based on successful probe of the I2C based GPIO
+ expander on that board. This option selected in this menu has
+ an effect only in case of a successful UI card detection.
+
+config DA830_UI_LCD
+ bool "LCD"
+ help
+ Say Y here to use the LCD as a framebuffer or simple character
+ display.
+
+config DA830_UI_NAND
+ bool "NAND flash"
+ help
+ Say Y here to use the NAND flash. Do not forget to setup
+ the switch correctly.
+endchoice
+
config MACH_DAVINCI_DA850_EVM
bool "TI DA850/OMAP-L138 Reference Platform"
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
+ select GPIO_PCA953X
help
Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
+choice
+ prompt "Select peripherals connected to expander on UI board"
+ depends on MACH_DAVINCI_DA850_EVM
+ help
+ The presence of User Interface (UI) card on the DA850/OMAP-L138
+ EVM is detected automatically based on successful probe of the I2C
+ based GPIO expander on that card. This option selected in this
+ menu has an effect only in case of a successful UI card detection.
+
+config DA850_UI_NONE
+ bool "No peripheral is enabled"
+ help
+ Say Y if you do not want to enable any of the peripherals connected
+ to TCA6416 expander on DA850/OMAP-L138 EVM UI card
+
+config DA850_UI_RMII
+ bool "RMII Ethernet PHY"
+ help
+ Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
+ This PHY is found on the UI daughter card that is supplied with
+ the EVM.
+ NOTE: Please take care while choosing this option, MII PHY will
+ not be functional if RMII mode is selected.
+
+endchoice
+
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI