1 files changed, 415 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
new file mode 100644
index 00000000000..c759d72494e
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -0,0 +1,415 @@
+/*
+ * TI DA850/OMAP-L138 EVM board
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da830-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/nand.h>
+
+#define DA850_EVM_PHY_MASK		0x1
+#define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
+
+#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
+#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
+
+#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
+
+static struct mtd_partition da850_evm_norflash_partition[] = {
+	{
+		.name           = "NOR filesystem",
+		.offset         = 0,
+		.size           = MTDPART_SIZ_FULL,
+		.mask_flags     = 0,
+	},
+};
+
+static struct physmap_flash_data da850_evm_norflash_data = {
+	.width		= 2,
+	.parts		= da850_evm_norflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
+};
+
+static struct resource da850_evm_norflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS2_BASE,
+		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_norflash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data  = &da850_evm_norflash_data,
+	},
+	.num_resources	= 1,
+	.resource	= da850_evm_norflash_resource,
+};
+
+/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
+ * (128K blocks). It may be used instead of the (default) SPI flash
+ * to boot, using TI's tools to install the secondary boot loader
+ * (UBL) and U-Boot.
+ */
+struct mtd_partition da850_evm_nandflash_partition[] = {
+	{
+		.name		= "u-boot env",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	 },
+	{
+		.name		= "UBL",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= 0x200000,
+		.size		= SZ_2M,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static struct davinci_nand_pdata da850_evm_nandflash_data = {
+	.parts		= da850_evm_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource da850_evm_nandflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &da850_evm_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
+	.resource	= da850_evm_nandflash_resource,
+};
+
+static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
+};
+
+static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da850_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static struct platform_device *da850_evm_devices[] __initdata = {
+	&da850_evm_nandflash_device,
+	&da850_evm_norflash_device,
+};
+
+/* davinci da850 evm audio machine driver */
+static u8 da850_iis_serializer_direction[] = {
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da850_evm_snd_data = {
+	.tx_dma_offset	= 0x2000,
+	.rx_dma_offset	= 0x2000,
+	.op_mode	= DAVINCI_MCASP_IIS_MODE,
+	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
+	.tdm_slots	= 2,
+	.serial_dir	= da850_iis_serializer_direction,
+	.eventq_no	= EVENTQ_1,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
+static int da850_evm_mmc_get_ro(int index)
+{
+	return gpio_get_value(DA850_MMCSD_WP_PIN);
+}
+
+static int da850_evm_mmc_get_cd(int index)
+{
+	return !gpio_get_value(DA850_MMCSD_CD_PIN);
+}
+
+static struct davinci_mmc_config da850_mmc_config = {
+	.get_ro		= da850_evm_mmc_get_ro,
+	.get_cd		= da850_evm_mmc_get_cd,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static int da850_lcd_hw_init(void)
+{
+	int status;
+
+	status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
+	if (status < 0)
+		return status;
+
+	status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
+	if (status < 0) {
+		gpio_free(DA850_LCD_BL_PIN);
+		return status;
+	}
+
+	gpio_direction_output(DA850_LCD_BL_PIN, 0);
+	gpio_direction_output(DA850_LCD_PWR_PIN, 0);
+
+	/* disable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 0);
+
+	/* disable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 0);
+
+	/* enable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 1);
+
+	/* enable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 1);
+
+	return 0;
+}
+
+#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
+#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+
+static void __init da850_evm_init_nor(void)
+{
+	void __iomem *aemif_addr;
+
+	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+	/* Configure data bus width of CS2 to 16 bit */
+	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+		DA8XX_AEMIF_ASIZE_16BIT,
+		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+	iounmap(aemif_addr);
+}
+
+#if defined(CONFIG_MTD_PHYSMAP) || \
+    defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
+#endif
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+    defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+static __init void da850_evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int ret;
+
+	ret = da8xx_pinmux_setup(da850_nand_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da850_nor_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+				ret);
+
+	da850_evm_init_nor();
+
+	platform_add_devices(da850_evm_devices,
+				ARRAY_SIZE(da850_evm_devices));
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da850_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da850_i2c0_pins);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 0;
+
+	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+	if (ret)
+		pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da850_evm_init: emac registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	if (HAS_MMC) {
+		if (HAS_NOR)
+			pr_warning("WARNING: both NOR Flash and MMC/SD are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable one of them.\n");
+
+		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
+					" %d\n", ret);
+
+		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_CD_PIN);
+		gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_WP_PIN);
+		gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+		ret = da8xx_register_mmcsd0(&da850_mmc_config);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 registration failed:"
+					" %d\n", ret);
+	}
+
+	davinci_serial_init(&da850_evm_uart_config);
+
+	i2c_register_board_info(1, da850_evm_i2c_devices,
+			ARRAY_SIZE(da850_evm_i2c_devices));
+
+	/*
+	 * shut down uart 0 and 1; they are not used on the board and
+	 * accessing them causes endless "too much work in irq53" messages
+	 * with arago fs
+	 */
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+
+	ret = da8xx_pinmux_setup(da850_mcasp_pins);
+	if (ret)
+		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(0, &da850_evm_snd_data);
+
+	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+	if (ret)
+		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
+				ret);
+
+	ret = da850_lcd_hw_init();
+	if (ret)
+		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
+				ret);
+
+	ret = da8xx_register_lcdc();
+	if (ret)
+		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
+				ret);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da850_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da850_evm_console_init);
+#endif
+
+static __init void da850_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da850_evm_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da850_evm_map_io,
+	.init_irq	= da850_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da850_evm_init,
+MACHINE_END