1 files changed, 71 insertions, 3 deletions

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 31cf84fbb01..1213a0087ad 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -28,6 +28,9 @@
 #include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+
+#include <media/tvp514x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -194,6 +197,72 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM6446 EVM",
+	.ccdc = "DM6446 CCDC",
+};
+
 static struct platform_device rtc_dev = {
 	.name           = "rtc_davinci_evm",
 	.id             = -1,
@@ -562,9 +631,6 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),
 	},
-	/* ALSO:
-	 * - tvp5146 video decoder (0x5d)
-	 */
 };
 
 /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
@@ -594,6 +660,8 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm644x_set_vpfe_config(&vpfe_cfg);
 	dm644x_init();
 }