diff options
Diffstat (limited to 'arch/arm/mach-davinci/devices.c')
| -rw-r--r-- | arch/arm/mach-davinci/devices.c | 60 |
1 files changed, 37 insertions, 23 deletions
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index de16f347566..a55b650db71 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -31,6 +31,8 @@ #define DAVINCI_MMCSD0_BASE 0x01E10000 #define DM355_MMCSD0_BASE 0x01E11000 #define DM355_MMCSD1_BASE 0x01E00000 +#define DM365_MMCSD0_BASE 0x01D11000 +#define DM365_MMCSD1_BASE 0x01D00000 static struct resource i2c_resources[] = { { @@ -82,10 +84,10 @@ static struct resource mmcsd0_resources[] = { }, /* DMA channels: RX, then TX */ { - .start = DAVINCI_DMA_MMCRXEVT, + .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), .flags = IORESOURCE_DMA, }, { - .start = DAVINCI_DMA_MMCTXEVT, + .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT), .flags = IORESOURCE_DMA, }, }; @@ -119,10 +121,10 @@ static struct resource mmcsd1_resources[] = { }, /* DMA channels: RX, then TX */ { - .start = 30, /* rx */ + .start = EDMA_CTLR_CHAN(0, 30), /* rx */ .flags = IORESOURCE_DMA, }, { - .start = 31, /* tx */ + .start = EDMA_CTLR_CHAN(0, 31), /* tx */ .flags = IORESOURCE_DMA, }, }; @@ -154,19 +156,31 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) */ switch (module) { case 1: - if (!cpu_is_davinci_dm355()) + if (cpu_is_davinci_dm355()) { + /* REVISIT we may not need all these pins if e.g. this + * is a hard-wired SDIO device... + */ + davinci_cfg_reg(DM355_SD1_CMD); + davinci_cfg_reg(DM355_SD1_CLK); + davinci_cfg_reg(DM355_SD1_DATA0); + davinci_cfg_reg(DM355_SD1_DATA1); + davinci_cfg_reg(DM355_SD1_DATA2); + davinci_cfg_reg(DM355_SD1_DATA3); + } else if (cpu_is_davinci_dm365()) { + void __iomem *pupdctl1 = + IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c); + + /* Configure pull down control */ + __raw_writel((__raw_readl(pupdctl1) & ~0x400), + pupdctl1); + + mmcsd1_resources[0].start = DM365_MMCSD1_BASE; + mmcsd1_resources[0].end = DM365_MMCSD1_BASE + + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1; + } else break; - /* REVISIT we may not need all these pins if e.g. this - * is a hard-wired SDIO device... - */ - davinci_cfg_reg(DM355_SD1_CMD); - davinci_cfg_reg(DM355_SD1_CLK); - davinci_cfg_reg(DM355_SD1_DATA0); - davinci_cfg_reg(DM355_SD1_DATA1); - davinci_cfg_reg(DM355_SD1_DATA2); - davinci_cfg_reg(DM355_SD1_DATA3); - pdev = &davinci_mmcsd1_device; break; case 0: @@ -180,9 +194,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) /* enable RX EDMA */ davinci_cfg_reg(DM355_EVT26_MMC0_RX); - } - - else if (cpu_is_davinci_dm644x()) { + } else if (cpu_is_davinci_dm365()) { + mmcsd0_resources[0].start = DM365_MMCSD0_BASE; + mmcsd0_resources[0].end = DM365_MMCSD0_BASE + + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0; + } else if (cpu_is_davinci_dm644x()) { /* REVISIT: should this be in board-init code? */ void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); @@ -216,6 +233,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) static struct resource wdt_resources[] = { { + .start = DAVINCI_WDOG_BASE, + .end = DAVINCI_WDOG_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, }; @@ -229,11 +248,6 @@ struct platform_device davinci_wdt_device = { static void davinci_init_wdt(void) { - struct davinci_soc_info *soc_info = &davinci_soc_info; - - wdt_resources[0].start = (resource_size_t)soc_info->wdt_base; - wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1; - platform_device_register(&davinci_wdt_device); } |