summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci')
-rw-r--r--arch/arm/mach-davinci/Kconfig19
-rw-r--r--arch/arm/mach-davinci/aemif.c2
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c339
-rw-r--r--arch/arm/mach-davinci/clock.c4
-rw-r--r--arch/arm/mach-davinci/clock.h2
-rw-r--r--arch/arm/mach-davinci/da850.c75
-rw-r--r--arch/arm/mach-davinci/devices-tnetv107x.c15
-rw-r--r--arch/arm/mach-davinci/dm355.c7
-rw-r--r--arch/arm/mach-davinci/dm365.c6
-rw-r--r--arch/arm/mach-davinci/include/mach/da8xx.h7
-rw-r--r--arch/arm/mach-davinci/include/mach/io.h4
-rw-r--r--arch/arm/mach-davinci/include/mach/spi.h52
-rw-r--r--arch/arm/mach-davinci/psc.c13
-rw-r--r--arch/arm/mach-davinci/time.c31
-rw-r--r--arch/arm/mach-davinci/tnetv107x.c23
-rw-r--r--arch/arm/mach-davinci/usb.c6
16 files changed, 519 insertions, 86 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index b77b860b36d..32f147998cd 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -61,6 +61,8 @@ config MACH_DAVINCI_EVM
bool "TI DM644x EVM"
default ARCH_DAVINCI_DM644x
depends on ARCH_DAVINCI_DM644x
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Configure this option to specify the whether the board used
for development is a DM644x EVM
@@ -68,6 +70,8 @@ config MACH_DAVINCI_EVM
config MACH_SFFSDR
bool "Lyrtech SFFSDR"
depends on ARCH_DAVINCI_DM644x
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
@@ -99,6 +103,8 @@ config MACH_DAVINCI_DM6467_EVM
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
select MACH_DAVINCI_DM6467TEVM
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
@@ -110,6 +116,8 @@ config MACH_DAVINCI_DM365_EVM
bool "TI DM365 EVM"
default ARCH_DAVINCI_DM365
depends on ARCH_DAVINCI_DM365
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Configure this option to specify whether the board used
for development is a DM365 EVM
@@ -119,6 +127,8 @@ config MACH_DAVINCI_DA830_EVM
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
select GPIO_PCF857X
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
@@ -148,7 +158,6 @@ config MACH_DAVINCI_DA850_EVM
bool "TI DA850/OMAP-L138/AM18x Reference Platform"
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
- select GPIO_PCA953X
help
Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
@@ -178,6 +187,12 @@ config DA850_UI_RMII
endchoice
+config GPIO_PCA953X
+ default MACH_DAVINCI_DA850_EVM
+
+config KEYBOARD_GPIO_POLLED
+ default MACH_DAVINCI_DA850_EVM
+
config MACH_TNETV107X
bool "TI TNETV107X Reference Platform"
default ARCH_DAVINCI_TNETV107X
@@ -188,6 +203,8 @@ config MACH_TNETV107X
config MACH_MITYOMAPL138
bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
depends on ARCH_DAVINCI_DA850
+ select MISC_DEVICES
+ select EEPROM_AT24
help
Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
System on Module. Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
index 9c3f500fc12..1ce70a91f2e 100644
--- a/arch/arm/mach-davinci/aemif.c
+++ b/arch/arm/mach-davinci/aemif.c
@@ -90,7 +90,7 @@ int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
void __iomem *base, unsigned cs)
{
unsigned set, val;
- unsigned ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
+ int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
unsigned offset = A1CR_OFFSET + cs * 4;
struct clk *aemif_clk;
unsigned long clkrate;
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index c6e11c682e4..b01fb2ab944 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,8 +17,10 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
+#include <linux/input.h>
#include <linux/mfd/tps6507x.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -266,34 +268,115 @@ static inline void da850_evm_setup_emac_rmii(int rmii_sel)
struct davinci_soc_info *soc_info = &davinci_soc_info;
soc_info->emac_pdata->rmii_en = 1;
- gpio_set_value(rmii_sel, 0);
+ gpio_set_value_cansleep(rmii_sel, 0);
}
#else
static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
#endif
+
+#define DA850_KEYS_DEBOUNCE_MS 10
+/*
+ * At 200ms polling interval it is possible to miss an
+ * event by tapping very lightly on the push button but most
+ * pushes do result in an event; longer intervals require the
+ * user to hold the button whereas shorter intervals require
+ * more CPU time for polling.
+ */
+#define DA850_GPIO_KEYS_POLL_MS 200
+
+enum da850_evm_ui_exp_pins {
+ DA850_EVM_UI_EXP_SEL_C = 5,
+ DA850_EVM_UI_EXP_SEL_B,
+ DA850_EVM_UI_EXP_SEL_A,
+ DA850_EVM_UI_EXP_PB8,
+ DA850_EVM_UI_EXP_PB7,
+ DA850_EVM_UI_EXP_PB6,
+ DA850_EVM_UI_EXP_PB5,
+ DA850_EVM_UI_EXP_PB4,
+ DA850_EVM_UI_EXP_PB3,
+ DA850_EVM_UI_EXP_PB2,
+ DA850_EVM_UI_EXP_PB1,
+};
+
+static const char const *da850_evm_ui_exp[] = {
+ [DA850_EVM_UI_EXP_SEL_C] = "sel_c",
+ [DA850_EVM_UI_EXP_SEL_B] = "sel_b",
+ [DA850_EVM_UI_EXP_SEL_A] = "sel_a",
+ [DA850_EVM_UI_EXP_PB8] = "pb8",
+ [DA850_EVM_UI_EXP_PB7] = "pb7",
+ [DA850_EVM_UI_EXP_PB6] = "pb6",
+ [DA850_EVM_UI_EXP_PB5] = "pb5",
+ [DA850_EVM_UI_EXP_PB4] = "pb4",
+ [DA850_EVM_UI_EXP_PB3] = "pb3",
+ [DA850_EVM_UI_EXP_PB2] = "pb2",
+ [DA850_EVM_UI_EXP_PB1] = "pb1",
+};
+
+#define DA850_N_UI_PB 8
+
+static struct gpio_keys_button da850_evm_ui_keys[] = {
+ [0 ... DA850_N_UI_PB - 1] = {
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
+ .code = -1, /* assigned at runtime */
+ .gpio = -1, /* assigned at runtime */
+ .desc = NULL, /* assigned at runtime */
+ },
+};
+
+static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
+ .buttons = da850_evm_ui_keys,
+ .nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
+ .poll_interval = DA850_GPIO_KEYS_POLL_MS,
+};
+
+static struct platform_device da850_evm_ui_keys_device = {
+ .name = "gpio-keys-polled",
+ .id = 0,
+ .dev = {
+ .platform_data = &da850_evm_ui_keys_pdata
+ },
+};
+
+static void da850_evm_ui_keys_init(unsigned gpio)
+{
+ int i;
+ struct gpio_keys_button *button;
+
+ for (i = 0; i < DA850_N_UI_PB; i++) {
+ button = &da850_evm_ui_keys[i];
+ button->code = KEY_F8 - i;
+ button->desc = (char *)
+ da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
+ button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
+ }
+}
+
static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
unsigned ngpio, void *c)
{
int sel_a, sel_b, sel_c, ret;
- sel_a = gpio + 7;
- sel_b = gpio + 6;
- sel_c = gpio + 5;
+ sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
+ sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
+ sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
- ret = gpio_request(sel_a, "sel_a");
+ ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_a);
goto exp_setup_sela_fail;
}
- ret = gpio_request(sel_b, "sel_b");
+ ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_b);
goto exp_setup_selb_fail;
}
- ret = gpio_request(sel_c, "sel_c");
+ ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_c);
goto exp_setup_selc_fail;
@@ -304,6 +387,13 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
gpio_direction_output(sel_b, 1);
gpio_direction_output(sel_c, 1);
+ da850_evm_ui_keys_init(gpio);
+ ret = platform_device_register(&da850_evm_ui_keys_device);
+ if (ret) {
+ pr_warning("Could not register UI GPIO expander push-buttons");
+ goto exp_setup_keys_fail;
+ }
+
ui_card_detected = 1;
pr_info("DA850/OMAP-L138 EVM UI card detected\n");
@@ -313,6 +403,8 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
return 0;
+exp_setup_keys_fail:
+ gpio_free(sel_c);
exp_setup_selc_fail:
gpio_free(sel_b);
exp_setup_selb_fail:
@@ -324,14 +416,192 @@ exp_setup_sela_fail:
static int da850_evm_ui_expander_teardown(struct i2c_client *client,
unsigned gpio, unsigned ngpio, void *c)
{
+ platform_device_unregister(&da850_evm_ui_keys_device);
+
/* deselect all functionalities */
- gpio_set_value(gpio + 5, 1);
- gpio_set_value(gpio + 6, 1);
- gpio_set_value(gpio + 7, 1);
+ gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
+ gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
+ gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
+
+ gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
+ gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
+ gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
+
+ return 0;
+}
+
+/* assign the baseboard expander's GPIOs after the UI board's */
+#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
+#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
+
+enum da850_evm_bb_exp_pins {
+ DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
+ DA850_EVM_BB_EXP_SW_RST,
+ DA850_EVM_BB_EXP_TP_23,
+ DA850_EVM_BB_EXP_TP_22,
+ DA850_EVM_BB_EXP_TP_21,
+ DA850_EVM_BB_EXP_USER_PB1,
+ DA850_EVM_BB_EXP_USER_LED2,
+ DA850_EVM_BB_EXP_USER_LED1,
+ DA850_EVM_BB_EXP_USER_SW1,
+ DA850_EVM_BB_EXP_USER_SW2,
+ DA850_EVM_BB_EXP_USER_SW3,
+ DA850_EVM_BB_EXP_USER_SW4,
+ DA850_EVM_BB_EXP_USER_SW5,
+ DA850_EVM_BB_EXP_USER_SW6,
+ DA850_EVM_BB_EXP_USER_SW7,
+ DA850_EVM_BB_EXP_USER_SW8
+};
+
+static const char const *da850_evm_bb_exp[] = {
+ [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en",
+ [DA850_EVM_BB_EXP_SW_RST] = "sw_rst",
+ [DA850_EVM_BB_EXP_TP_23] = "tp_23",
+ [DA850_EVM_BB_EXP_TP_22] = "tp_22",
+ [DA850_EVM_BB_EXP_TP_21] = "tp_21",
+ [DA850_EVM_BB_EXP_USER_PB1] = "user_pb1",
+ [DA850_EVM_BB_EXP_USER_LED2] = "user_led2",
+ [DA850_EVM_BB_EXP_USER_LED1] = "user_led1",
+ [DA850_EVM_BB_EXP_USER_SW1] = "user_sw1",
+ [DA850_EVM_BB_EXP_USER_SW2] = "user_sw2",
+ [DA850_EVM_BB_EXP_USER_SW3] = "user_sw3",
+ [DA850_EVM_BB_EXP_USER_SW4] = "user_sw4",
+ [DA850_EVM_BB_EXP_USER_SW5] = "user_sw5",
+ [DA850_EVM_BB_EXP_USER_SW6] = "user_sw6",
+ [DA850_EVM_BB_EXP_USER_SW7] = "user_sw7",
+ [DA850_EVM_BB_EXP_USER_SW8] = "user_sw8",
+};
+
+#define DA850_N_BB_USER_SW 8
+
+static struct gpio_keys_button da850_evm_bb_keys[] = {
+ [0] = {
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
+ .code = KEY_PROG1,
+ .desc = NULL, /* assigned at runtime */
+ .gpio = -1, /* assigned at runtime */
+ },
+ [1 ... DA850_N_BB_USER_SW] = {
+ .type = EV_SW,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
+ .code = -1, /* assigned at runtime */
+ .desc = NULL, /* assigned at runtime */
+ .gpio = -1, /* assigned at runtime */
+ },
+};
+
+static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
+ .buttons = da850_evm_bb_keys,
+ .nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
+ .poll_interval = DA850_GPIO_KEYS_POLL_MS,
+};
+
+static struct platform_device da850_evm_bb_keys_device = {
+ .name = "gpio-keys-polled",
+ .id = 1,
+ .dev = {
+ .platform_data = &da850_evm_bb_keys_pdata
+ },
+};
+
+static void da850_evm_bb_keys_init(unsigned gpio)
+{
+ int i;
+ struct gpio_keys_button *button;
+
+ button = &da850_evm_bb_keys[0];
+ button->desc = (char *)
+ da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
+ button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
+
+ for (i = 0; i < DA850_N_BB_USER_SW; i++) {
+ button = &da850_evm_bb_keys[i + 1];
+ button->code = SW_LID + i;
+ button->desc = (char *)
+ da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
+ button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
+ }
+}
- gpio_free(gpio + 5);
- gpio_free(gpio + 6);
- gpio_free(gpio + 7);
+#define DA850_N_BB_USER_LED 2
+
+static struct gpio_led da850_evm_bb_leds[] = {
+ [0 ... DA850_N_BB_USER_LED - 1] = {
+ .active_low = 1,
+ .gpio = -1, /* assigned at runtime */
+ .name = NULL, /* assigned at runtime */
+ },
+};
+
+static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
+ .leds = da850_evm_bb_leds,
+ .num_leds = ARRAY_SIZE(da850_evm_bb_leds),
+};
+
+static struct platform_device da850_evm_bb_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_evm_bb_leds_pdata
+ }
+};
+
+static void da850_evm_bb_leds_init(unsigned gpio)
+{
+ int i;
+ struct gpio_led *led;
+
+ for (i = 0; i < DA850_N_BB_USER_LED; i++) {
+ led = &da850_evm_bb_leds[i];
+
+ led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
+ led->name =
+ da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
+ }
+}
+
+static int da850_evm_bb_expander_setup(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio,
+ void *c)
+{
+ int ret;
+
+ /*
+ * Register the switches and pushbutton on the baseboard as a gpio-keys
+ * device.
+ */
+ da850_evm_bb_keys_init(gpio);
+ ret = platform_device_register(&da850_evm_bb_keys_device);
+ if (ret) {
+ pr_warning("Could not register baseboard GPIO expander keys");
+ goto io_exp_setup_sw_fail;
+ }
+
+ da850_evm_bb_leds_init(gpio);
+ ret = platform_device_register(&da850_evm_bb_leds_device);
+ if (ret) {
+ pr_warning("Could not register baseboard GPIO expander LEDS");
+ goto io_exp_setup_leds_fail;
+ }
+
+ return 0;
+
+io_exp_setup_leds_fail:
+ platform_device_unregister(&da850_evm_bb_keys_device);
+io_exp_setup_sw_fail:
+ return ret;
+}
+
+static int da850_evm_bb_expander_teardown(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio, void *c)
+{
+ platform_device_unregister(&da850_evm_bb_leds_device);
+ platform_device_unregister(&da850_evm_bb_keys_device);
return 0;
}
@@ -340,6 +610,14 @@ static struct pca953x_platform_data da850_evm_ui_expander_info = {
.gpio_base = DAVINCI_N_GPIO,
.setup = da850_evm_ui_expander_setup,
.teardown = da850_evm_ui_expander_teardown,
+ .names = da850_evm_ui_exp,
+};
+
+static struct pca953x_platform_data da850_evm_bb_expander_info = {
+ .gpio_base = DA850_BB_EXPANDER_GPIO_BASE,
+ .setup = da850_evm_bb_expander_setup,
+ .teardown = da850_evm_bb_expander_teardown,
+ .names = da850_evm_bb_exp,
};
static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
@@ -350,6 +628,10 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
I2C_BOARD_INFO("tca6416", 0x20),
.platform_data = &da850_evm_ui_expander_info,
},
+ {
+ I2C_BOARD_INFO("tca6416", 0x21),
+ .platform_data = &da850_evm_bb_expander_info,
+ },
};
static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@@ -540,7 +822,7 @@ static struct regulator_init_data tps65070_regulator_data[] = {
{
.constraints = {
.min_uV = 950000,
- .max_uV = 1320000,
+ .max_uV = 1350000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
@@ -591,7 +873,7 @@ static struct tps6507x_board tps_board = {
.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
};
-static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
+static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
.platform_data = &tps_board,
@@ -600,8 +882,8 @@ static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
static int __init pmic_tps65070_init(void)
{
- return i2c_register_board_info(1, da850evm_tps65070_info,
- ARRAY_SIZE(da850evm_tps65070_info));
+ return i2c_register_board_info(1, da850_evm_tps65070_info,
+ ARRAY_SIZE(da850_evm_tps65070_info));
}
static const short da850_evm_lcdc_pins[] = {
@@ -736,6 +1018,27 @@ static struct edma_rsv_info *da850_edma_rsv[2] = {
&da850_edma_cc1_rsv,
};
+#ifdef CONFIG_CPU_FREQ
+static __init int da850_evm_init_cpufreq(void)
+{
+ switch (system_rev & 0xF) {
+ case 3:
+ da850_max_speed = 456000;
+ break;
+ case 2:
+ da850_max_speed = 408000;
+ break;
+ case 1:
+ da850_max_speed = 372000;
+ break;
+ }
+
+ return da850_register_cpufreq("pll0_sysclk3");
+}
+#else
+static __init int da850_evm_init_cpufreq(void) { return 0; }
+#endif
+
static __init void da850_evm_init(void)
{
int ret;
@@ -836,7 +1139,7 @@ static __init void da850_evm_init(void)
if (ret)
pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
- ret = da850_register_cpufreq("pll0_sysclk3");
+ ret = da850_evm_init_cpufreq();
if (ret)
pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
ret);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 01ba080433d..e4e3af179f0 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -336,7 +336,7 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate)
ratio--;
}
- if (ratio > PLLDIV_RATIO_MASK)
+ if (ratio > pll->div_ratio_mask)
return -EINVAL;
do {
@@ -344,7 +344,7 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate)
} while (v & PLLSTAT_GOSTAT);
v = __raw_readl(pll->base + clk->div_reg);
- v &= ~PLLDIV_RATIO_MASK;
+ v &= ~pll->div_ratio_mask;
v |= ratio | PLLDIV_EN;
__raw_writel(v, pll->base + clk->div_reg);
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 11099980b58..0dd22031ec6 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -68,7 +68,7 @@
#ifndef __ASSEMBLER__
#include <linux/list.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
#define PLLSTAT_GOSTAT BIT(0)
#define PLLCMD_GOSET BIT(0)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 63916b90276..78b5ae29ae4 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -830,8 +830,7 @@ static void da850_set_async3_src(int pllnum)
* According to the TRM, minimum PLLM results in maximum power savings.
* The OPP definitions below should keep the PLLM as low as possible.
*
- * The output of the PLLM must be between 400 to 600 MHz.
- * This rules out prediv of anything but divide-by-one for 24Mhz OSC input.
+ * The output of the PLLM must be between 300 to 600 MHz.
*/
struct da850_opp {
unsigned int freq; /* in KHz */
@@ -842,6 +841,33 @@ struct da850_opp {
unsigned int cvdd_max; /* in uV */
};
+static const struct da850_opp da850_opp_456 = {
+ .freq = 456000,
+ .prediv = 1,
+ .mult = 19,
+ .postdiv = 1,
+ .cvdd_min = 1300000,
+ .cvdd_max = 1350000,
+};
+
+static const struct da850_opp da850_opp_408 = {
+ .freq = 408000,
+ .prediv = 1,
+ .mult = 17,
+ .postdiv = 1,
+ .cvdd_min = 1300000,
+ .cvdd_max = 1350000,
+};
+
+static const struct da850_opp da850_opp_372 = {
+ .freq = 372000,
+ .prediv = 2,
+ .mult = 31,
+ .postdiv = 1,
+ .cvdd_min = 1200000,
+ .cvdd_max = 1320000,
+};
+
static const struct da850_opp da850_opp_300 = {
.freq = 300000,
.prediv = 1,
@@ -876,6 +902,9 @@ static const struct da850_opp da850_opp_96 = {
}
static struct cpufreq_frequency_table da850_freq_table[] = {
+ OPP(456),
+ OPP(408),
+ OPP(372),
OPP(300),
OPP(200),
OPP(96),
@@ -886,6 +915,19 @@ static struct cpufreq_frequency_table da850_freq_table[] = {
};
#ifdef CONFIG_REGULATOR
+static int da850_set_voltage(unsigned int index);
+static int da850_regulator_init(void);
+#endif
+
+static struct davinci_cpufreq_config cpufreq_info = {
+ .freq_table = da850_freq_table,
+#ifdef CONFIG_REGULATOR
+ .init = da850_regulator_init,
+ .set_voltage = da850_set_voltage,
+#endif
+};
+
+#ifdef CONFIG_REGULATOR
static struct regulator *cvdd;
static int da850_set_voltage(unsigned int index)
@@ -895,7 +937,7 @@ static int da850_set_voltage(unsigned int index)
if (!cvdd)
return -ENODEV;
- opp = (struct da850_opp *) da850_freq_table[index].index;
+ opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
}
@@ -912,14 +954,6 @@ static int da850_regulator_init(void)
}
#endif
-static struct davinci_cpufreq_config cpufreq_info = {
- .freq_table = &da850_freq_table[0],
-#ifdef CONFIG_REGULATOR
- .init = da850_regulator_init,
- .set_voltage = da850_set_voltage,
-#endif
-};
-
static struct platform_device da850_cpufreq_device = {
.name = "cpufreq-davinci",
.dev = {
@@ -928,12 +962,22 @@ static struct platform_device da850_cpufreq_device = {
.id = -1,
};
+unsigned int da850_max_speed = 300000;
+
int __init da850_register_cpufreq(char *async_clk)
{
+ int i;
+
/* cpufreq driver can help keep an "async" clock constant */
if (async_clk)
clk_add_alias("async", da850_cpufreq_device.name,
async_clk, NULL);
+ for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
+ if (da850_freq_table[i].frequency <= da850_max_speed) {
+ cpufreq_info.freq_table = &da850_freq_table[i];
+ break;
+ }
+ }
return platform_device_register(&da850_cpufreq_device);
}
@@ -942,17 +986,18 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
int i, ret = 0, diff;
unsigned int best = (unsigned int) -1;
+ struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
rate /= 1000; /* convert to kHz */
- for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
- diff = da850_freq_table[i].frequency - rate;
+ for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ diff = table[i].frequency - rate;
if (diff < 0)
diff = -diff;
if (diff < best) {
best = diff;
- ret = da850_freq_table[i].frequency;
+ ret = table[i].frequency;
}
}
@@ -973,7 +1018,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
struct pll_data *pll = clk->pll_data;
int ret;
- opp = (struct da850_opp *) da850_freq_table[index].index;
+ opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
prediv = opp->prediv;
mult = opp->mult;
postdiv = opp->postdiv;
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index c9a86d8130d..85503debda5 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -344,7 +344,20 @@ static struct platform_device tsc_device = {
void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
{
- int i;
+ int i, error;
+ struct clk *tsc_clk;
+
+ /*
+ * The reset defaults for tnetv107x tsc clock divider is set too high.
+ * This forces the clock down to a range that allows the ADC to
+ * complete sample conversion in time.
+ */
+ tsc_clk = clk_get(NULL, "sys_tsc_clk");
+ if (tsc_clk) {
+ error = clk_set_rate(tsc_clk, 5000000);
+ WARN_ON(error < 0);
+ clk_put(tsc_clk);
+ }
platform_device_register(&edma_device);
platform_device_register(&tnetv107x_wdt_device);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 2652af124ac..a5f8a80c1f2 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -412,12 +412,7 @@ static struct resource dm355_spi0_resources[] = {
static struct davinci_spi_platform_data dm355_spi0_pdata = {
.version = SPI_VERSION_1,
.num_chipselect = 2,
- .clk_internal = 1,
- .cs_hold = 1,
- .intr_level = 0,
- .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */
- .c2tdelay = 0,
- .t2cdelay = 0,
+ .cshold_bug = true,
};
static struct platform_device dm355_spi0_device = {
.name = "spi_davinci",
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c466d710d3c..02d2cc380df 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -625,12 +625,6 @@ static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
static struct davinci_spi_platform_data dm365_spi0_pdata = {
.version = SPI_VERSION_1,
.num_chipselect = 2,
- .clk_internal = 1,
- .cs_hold = 1,
- .intr_level = 0,
- .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */
- .c2tdelay = 0,
- .t2cdelay = 0,
};
static struct resource dm365_spi0_resources[] = {
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 4247b3f53b3..e7f95206652 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -28,6 +28,13 @@ extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;
/*
+ * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
+ * (than the regular 300Mhz variant), the board code should set this up
+ * with the supported speed before calling da850_register_cpufreq().
+ */
+extern unsigned int da850_max_speed;
+
+/*
* The cp_intc interrupt controller for the da8xx isn't in the same
* chunk of physical memory space as the other registers (like it is
* on the davincis) so it needs to be mapped separately. It will be
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index 62b0a90309a..d1b954955c1 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -22,8 +22,8 @@
#define __mem_isa(a) (a)
#ifndef __ASSEMBLER__
-#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
-#define __arch_iounmap(v) davinci_iounmap(v)
+#define __arch_ioremap davinci_ioremap
+#define __arch_iounmap davinci_iounmap
void __iomem *davinci_ioremap(unsigned long phys, size_t size,
unsigned int type);
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
index 910efbf099c..38f4da5ca13 100644
--- a/arch/arm/mach-davinci/include/mach/spi.h
+++ b/arch/arm/mach-davinci/include/mach/spi.h
@@ -19,26 +19,66 @@
#ifndef __ARCH_ARM_DAVINCI_SPI_H
#define __ARCH_ARM_DAVINCI_SPI_H
+#define SPI_INTERN_CS 0xFF
+
enum {
SPI_VERSION_1, /* For DM355/DM365/DM6467 */
SPI_VERSION_2, /* For DA8xx */
};
+/**
+ * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
+ *
+ * @version: version of the SPI IP. Different DaVinci devices have slightly
+ * varying versions of the same IP.
+ * @num_chipselect: number of chipselects supported by this SPI master
+ * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt
+ * controller withn the SoC. Possible values are 0 and 1.
+ * @chip_sel: list of GPIOs which can act as chip-selects for the SPI.
+ * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
+ * to populate if all chip-selects are internal.
+ * @cshold_bug: set this to true if the SPI controller on your chip requires
+ * a write to CSHOLD bit in between transfers (like in DM355).
+ */
struct davinci_spi_platform_data {
u8 version;
u8 num_chipselect;
+ u8 intr_line;
+ u8 *chip_sel;
+ bool cshold_bug;
+};
+
+/**
+ * davinci_spi_config - Per-chip-select configuration for SPI slave devices
+ *
+ * @wdelay: amount of delay between transmissions. Measured in number of
+ * SPI module clocks.
+ * @odd_parity: polarity of parity flag at the end of transmit data stream.
+ * 0 - odd parity, 1 - even parity.
+ * @parity_enable: enable transmission of parity at end of each transmit
+ * data stream.
+ * @io_type: type of IO transfer. Choose between polled, interrupt and DMA.
+ * @timer_disable: disable chip-select timers (setup and hold)
+ * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks.
+ * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks.
+ * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured
+ * in number of SPI clocks.
+ * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in
+ * number of SPI clocks.
+ */
+struct davinci_spi_config {
u8 wdelay;
u8 odd_parity;
u8 parity_enable;
- u8 wait_enable;
+#define SPI_IO_TYPE_INTR 0
+#define SPI_IO_TYPE_POLL 1
+#define SPI_IO_TYPE_DMA 2
+ u8 io_type;
u8 timer_disable;
- u8 clk_internal;
- u8 cs_hold;
- u8 intr_level;
- u8 poll_mode;
- u8 use_dma;
u8 c2tdelay;
u8 t2cdelay;
+ u8 t2edelay;
+ u8 c2edelay;
};
#endif /* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1b15dbd0a77..a4158040070 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -83,21 +83,16 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
__raw_writel(pdctl1, psc_base + PDCTL1);
-
- do {
- ptstat = __raw_readl(psc_base +
- PTSTAT);
- } while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
__raw_writel(ptcmd, psc_base + PTCMD);
-
- do {
- ptstat = __raw_readl(psc_base + PTSTAT);
- } while (!(((ptstat >> domain) & 1) == 0));
}
do {
+ ptstat = __raw_readl(psc_base + PTSTAT);
+ } while (!(((ptstat >> domain) & 1) == 0));
+
+ do {
mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0f21c36e65d..e1969ce904d 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -272,15 +272,35 @@ static cycle_t read_cycles(struct clocksource *cs)
return (cycles_t)timer32_read(t);
}
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t read_dummy(struct clocksource *cs)
+{
+ return 0;
+}
+
+
static struct clocksource clocksource_davinci = {
.rating = 300,
- .read = read_cycles,
+ .read = read_dummy,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 24,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
+ * Overwrite weak default sched_clock with something more precise
+ */
+unsigned long long notrace sched_clock(void)
+{
+ const cycle_t cyc = clocksource_davinci.read(&clocksource_davinci);
+
+ return clocksource_cyc2ns(cyc, clocksource_davinci.mult,
+ clocksource_davinci.shift);
+}
+
+/*
* clockevent
*/
static int davinci_set_next_event(unsigned long cycles,
@@ -377,11 +397,10 @@ static void __init davinci_timer_init(void)
davinci_clock_tick_rate = clk_get_rate(timer_clk);
/* setup clocksource */
+ clocksource_davinci.read = read_cycles;
clocksource_davinci.name = id_to_name[clocksource_id];
- clocksource_davinci.mult =
- clocksource_khz2mult(davinci_clock_tick_rate/1000,
- clocksource_davinci.shift);
- if (clocksource_register(&clocksource_davinci))
+ if (clocksource_register_hz(&clocksource_davinci,
+ davinci_clock_tick_rate))
printk(err, clocksource_davinci.name);
/* setup clockevent */
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index daeae06430b..6fcdecec8d8 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -131,12 +131,13 @@ define_pll_clk(tdm, 1, 0x0ff, 0x200);
define_pll_clk(eth, 2, 0x0ff, 0x400);
/* Level 2 - divided outputs from the PLLs */
-#define define_pll_div_clk(pll, cname, div) \
- static struct clk pll##_##cname##_clk = { \
- .name = #pll "_" #cname "_clk",\
- .parent = &pll_##pll##_clk, \
- .flags = CLK_PLL, \
- .div_reg = PLLDIV##div, \
+#define define_pll_div_clk(pll, cname, div) \
+ static struct clk pll##_##cname##_clk = { \
+ .name = #pll "_" #cname "_clk", \
+ .parent = &pll_##pll##_clk, \
+ .flags = CLK_PLL, \
+ .div_reg = PLLDIV##div, \
+ .set_rate = davinci_set_sysclk_rate, \
}
define_pll_div_clk(sys, arm1176, 1);
@@ -192,6 +193,7 @@ lpsc_clk_enabled(system, sys_half_clk, SYSTEM);
lpsc_clk_enabled(ddr2_vrst, sys_ddr_clk, DDR2_EMIF1_VRST);
lpsc_clk_enabled(ddr2_vctl_rst, sys_ddr_clk, DDR2_EMIF2_VCTL_RST);
lpsc_clk_enabled(wdt_arm, sys_half_clk, WDT_ARM);
+lpsc_clk_enabled(timer1, sys_half_clk, TIMER1);
lpsc_clk(mbx_lite, sys_arm1176_clk, MBX_LITE);
lpsc_clk(ethss, eth_125mhz_clk, ETHSS);
@@ -205,16 +207,15 @@ lpsc_clk(mdio, sys_half_clk, MDIO);
lpsc_clk(sdio0, sys_half_clk, SDIO0);
lpsc_clk(sdio1, sys_half_clk, SDIO1);
lpsc_clk(timer0, sys_half_clk, TIMER0);
-lpsc_clk(timer1, sys_half_clk, TIMER1);
lpsc_clk(wdt_dsp, sys_half_clk, WDT_DSP);
lpsc_clk(ssp, sys_half_clk, SSP);
lpsc_clk(tdm0, tdm_0_clk, TDM0);
lpsc_clk(tdm1, tdm_1_clk, TDM1);
lpsc_clk(vlynq, sys_vlynq_ref_clk, VLYNQ);
lpsc_clk(mcdma, sys_half_clk, MCDMA);
-lpsc_clk(usb0, sys_half_clk, USB0);
-lpsc_clk(usb1, sys_half_clk, USB1);
lpsc_clk(usbss, sys_half_clk, USBSS);
+lpsc_clk(usb0, clk_usbss, USB0);
+lpsc_clk(usb1, clk_usbss, USB1);
lpsc_clk(ethss_rgmii, eth_250mhz_clk, ETHSS_RGMII);
lpsc_clk(imcop, sys_dsp_clk, IMCOP);
lpsc_clk(spare, sys_half_clk, SPARE);
@@ -281,7 +282,9 @@ static struct clk_lookup clks[] = {
CLK(NULL, "clk_tdm0", &clk_tdm0),
CLK(NULL, "clk_vlynq", &clk_vlynq),
CLK(NULL, "clk_mcdma", &clk_mcdma),
+ CLK(NULL, "clk_usbss", &clk_usbss),
CLK(NULL, "clk_usb0", &clk_usb0),
+ CLK(NULL, "clk_usb1", &clk_usb1),
CLK(NULL, "clk_tdm1", &clk_tdm1),
CLK(NULL, "clk_debugss", &clk_debugss),
CLK(NULL, "clk_ethss_rgmii", &clk_ethss_rgmii),
@@ -289,8 +292,6 @@ static struct clk_lookup clks[] = {
CLK(NULL, "clk_imcop", &clk_imcop),
CLK(NULL, "clk_spare", &clk_spare),
CLK("davinci_mmc.1", NULL, &clk_sdio1),
- CLK(NULL, "clk_usb1", &clk_usb1),
- CLK(NULL, "clk_usbss", &clk_usbss),
CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst),
CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst),
CLK(NULL, NULL, NULL),
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 31f0cbea0ca..23d2b6d9fa6 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -64,17 +64,19 @@ static struct resource usb_resources[] = {
{
.start = IRQ_USBINT,
.flags = IORESOURCE_IRQ,
+ .name = "mc"
},
{
/* placeholder for the dedicated CPPI IRQ */
.flags = IORESOURCE_IRQ,
+ .name = "dma"
},
};
static u64 usb_dmamask = DMA_BIT_MASK(32);
static struct platform_device usb_dev = {
- .name = "musb_hdrc",
+ .name = "musb-davinci",
.id = -1,
.dev = {
.platform_data = &usb_data,
@@ -110,6 +112,7 @@ static struct resource da8xx_usb20_resources[] = {
{
.start = IRQ_DA8XX_USB_INT,
.flags = IORESOURCE_IRQ,
+ .name = "mc",
},
};
@@ -121,6 +124,7 @@ int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
usb_dev.resource = da8xx_usb20_resources;
usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
+ usb_dev.name = "musb-da8xx";
return platform_device_register(&usb_dev);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 12:00:53 +0000