diff options
Diffstat (limited to 'arch/arm/mach-ep93xx/micro9.c')
| -rw-r--r-- | arch/arm/mach-ep93xx/micro9.c | 132 |
1 files changed, 77 insertions, 55 deletions
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 0a313e82fb7..d83b80478b0 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -2,7 +2,9 @@ * linux/arch/arm/mach-ep93xx/micro9.c * * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH - * Manfred Gruber <manfred.gruber@contec.at> + * Manfred Gruber <m.gruber@tirol.com> + * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH + * Hubert Feurstein <hubert.feurstein@contec.at> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -20,104 +22,124 @@ #include <asm/mach/arch.h> -static struct ep93xx_eth_data micro9_eth_data = { - .phy_id = 0x1f, -}; - -static void __init micro9_init(void) -{ - ep93xx_register_eth(µ9_eth_data, 1); -} - -/* - * Micro9-H - */ -#ifdef CONFIG_MACH_MICRO9H -static struct physmap_flash_data micro9h_flash_data = { - .width = 4, -}; - -static struct resource micro9h_flash_resource = { +/************************************************************************* + * Micro9 NOR Flash + * + * Micro9-High has up to 64MB of 32-bit flash on CS1 + * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1 + * Micro9-Lite uses a seperate MTD map driver for flash support + * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1 + *************************************************************************/ +static struct physmap_flash_data micro9_flash_data; + +static struct resource micro9_flash_resource = { .start = EP93XX_CS1_PHYS_BASE, .end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device micro9h_flash = { +static struct platform_device micro9_flash = { .name = "physmap-flash", .id = 0, .dev = { - .platform_data = µ9h_flash_data, + .platform_data = µ9_flash_data, }, .num_resources = 1, - .resource = µ9h_flash_resource, + .resource = µ9_flash_resource, }; -static void __init micro9h_init(void) +static void __init __micro9_register_flash(unsigned int width) +{ + micro9_flash_data.width = width; + + platform_device_register(µ9_flash); +} + +static unsigned int __init micro9_detect_bootwidth(void) +{ + u32 v; + + /* Detect the bus width of the external flash memory */ + v = __raw_readl(EP93XX_SYSCON_SYSCFG); + if (v & EP93XX_SYSCON_SYSCFG_LCSN7) + return 4; /* 32-bit */ + else + return 2; /* 16-bit */ +} + +static void __init micro9_register_flash(void) { - platform_device_register(µ9h_flash); + if (machine_is_micro9()) + __micro9_register_flash(4); + else if (machine_is_micro9m() || machine_is_micro9s()) + __micro9_register_flash(micro9_detect_bootwidth()); } -static void __init micro9h_init_machine(void) + +/************************************************************************* + * Micro9 Ethernet + *************************************************************************/ +static struct ep93xx_eth_data micro9_eth_data = { + .phy_id = 0x1f, +}; + + +static void __init micro9_init_machine(void) { ep93xx_init_devices(); - micro9_init(); - micro9h_init(); + ep93xx_register_eth(µ9_eth_data, 1); + micro9_register_flash(); } -MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ + +#ifdef CONFIG_MACH_MICRO9H +MACHINE_START(MICRO9, "Contec Micro9-High") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9h_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -/* - * Micro9-M - */ #ifdef CONFIG_MACH_MICRO9M -static void __init micro9m_init_machine(void) -{ - ep93xx_init_devices(); - micro9_init(); -} - -MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ +MACHINE_START(MICRO9M, "Contec Micro9-Mid") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9m_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -/* - * Micro9-L - */ #ifdef CONFIG_MACH_MICRO9L -static void __init micro9l_init_machine(void) -{ - ep93xx_init_devices(); - micro9_init(); -} - -MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ +MACHINE_START(MICRO9L, "Contec Micro9-Lite") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9l_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif +#ifdef CONFIG_MACH_MICRO9S +MACHINE_START(MICRO9S, "Contec Micro9-Slim") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9_init_machine, +MACHINE_END +#endif |