diff options
Diffstat (limited to 'arch/arm/mach-ep93xx/snappercl15.c')
| -rw-r--r-- | arch/arm/mach-ep93xx/snappercl15.c | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c new file mode 100644 index 00000000000..38deaee4039 --- /dev/null +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -0,0 +1,172 @@ +/* + * arch/arm/mach-ep93xx/snappercl15.c + * Bluewater Systems Snapper CL15 system module + * + * Copyright (C) 2009 Bluewater Systems Ltd + * Author: Ryan Mallon <ryan@bluewatersys.com> + * + * NAND code adapted from driver by: + * Andre Renaud <andre@bluewatersys.com> + * James R. McKaskill + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + */ + +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/fb.h> + +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <mach/hardware.h> +#include <mach/fb.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M) + +#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */ +#define SNAPPERCL15_NAND_ALE (1 << 9) /* Address latch */ +#define SNAPPERCL15_NAND_CLE (1 << 10) /* Command latch */ +#define SNAPPERCL15_NAND_CEN (1 << 11) /* Chip enable (active low) */ +#define SNAPPERCL15_NAND_RDY (1 << 14) /* Device ready */ + +#define NAND_CTRL_ADDR(chip) (chip->IO_ADDR_W + 0x40) + +static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + static u16 nand_state = SNAPPERCL15_NAND_WPN; + u16 set; + + if (ctrl & NAND_CTRL_CHANGE) { + set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN; + + if (ctrl & NAND_NCE) + set &= ~SNAPPERCL15_NAND_CEN; + if (ctrl & NAND_CLE) + set |= SNAPPERCL15_NAND_CLE; + if (ctrl & NAND_ALE) + set |= SNAPPERCL15_NAND_ALE; + + nand_state &= ~(SNAPPERCL15_NAND_CEN | + SNAPPERCL15_NAND_CLE | + SNAPPERCL15_NAND_ALE); + nand_state |= set; + __raw_writew(nand_state, NAND_CTRL_ADDR(chip)); + } + + if (cmd != NAND_CMD_NONE) + __raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W); +} + +static int snappercl15_nand_dev_ready(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + + return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY); +} + +static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL}; + +static struct mtd_partition snappercl15_nand_parts[] = { + { + .name = "Kernel", + .offset = 0, + .size = SZ_2M, + }, + { + .name = "Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct platform_nand_data snappercl15_nand_data = { + .chip = { + .nr_chips = 1, + .part_probe_types = snappercl15_nand_part_probes, + .partitions = snappercl15_nand_parts, + .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts), + .options = NAND_NO_AUTOINCR, + .chip_delay = 25, + }, + .ctrl = { + .dev_ready = snappercl15_nand_dev_ready, + .cmd_ctrl = snappercl15_nand_cmd_ctrl, + }, +}; + +static struct resource snappercl15_nand_resource[] = { + { + .start = SNAPPERCL15_NAND_BASE, + .end = SNAPPERCL15_NAND_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device snappercl15_nand_device = { + .name = "gen_nand", + .id = -1, + .dev.platform_data = &snappercl15_nand_data, + .resource = snappercl15_nand_resource, + .num_resources = ARRAY_SIZE(snappercl15_nand_resource), +}; + +static struct ep93xx_eth_data __initdata snappercl15_eth_data = { + .phy_id = 1, +}; + +static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = { + .sda_pin = EP93XX_GPIO_LINE_EEDAT, + .sda_is_open_drain = 0, + .scl_pin = EP93XX_GPIO_LINE_EECLK, + .scl_is_open_drain = 0, + .udelay = 0, + .timeout = 0, +}; + +static struct i2c_board_info __initdata snappercl15_i2c_data[] = { + { + /* Audio codec */ + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, +}; + +static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = { + .num_modes = EP93XXFB_USE_MODEDB, + .bpp = 16, +}; + +static void __init snappercl15_init_machine(void) +{ + ep93xx_init_devices(); + ep93xx_register_eth(&snappercl15_eth_data, 1); + ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, + ARRAY_SIZE(snappercl15_i2c_data)); + ep93xx_register_fb(&snappercl15_fb_info); + platform_device_register(&snappercl15_nand_device); +} + +MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") + /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = snappercl15_init_machine, +MACHINE_END |