summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ep93xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ep93xx')
-rw-r--r--arch/arm/mach-ep93xx/Kconfig82
-rw-r--r--arch/arm/mach-ep93xx/Makefile8
-rw-r--r--arch/arm/mach-ep93xx/Makefile.boot7
-rw-r--r--arch/arm/mach-ep93xx/clock.c123
-rw-r--r--arch/arm/mach-ep93xx/core.c27
-rw-r--r--arch/arm/mach-ep93xx/edb9302.c68
-rw-r--r--arch/arm/mach-ep93xx/edb9302a.c68
-rw-r--r--arch/arm/mach-ep93xx/edb9307.c68
-rw-r--r--arch/arm/mach-ep93xx/edb9307a.c80
-rw-r--r--arch/arm/mach-ep93xx/edb9312.c69
-rw-r--r--arch/arm/mach-ep93xx/edb9315.c68
-rw-r--r--arch/arm/mach-ep93xx/edb9315a.c68
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c217
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h25
-rw-r--r--arch/arm/mach-ep93xx/include/mach/memory.h6
15 files changed, 421 insertions, 563 deletions
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 56bddcef690..d7291c682a6 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,87 +9,135 @@ config CRUNCH
comment "EP93xx Platforms"
+choice
+ prompt "EP93xx first SDRAM bank selection"
+ default EP93XX_SDCE3_SYNC_PHYS_OFFSET
+
+config EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ bool "0x00000000 - SDCE3/SyncBoot"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0x00000000
+
+config EP93XX_SDCE0_PHYS_OFFSET
+ bool "0xc0000000 - SDCEO"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xc0000000
+
+endchoice
+
config MACH_ADSSPHERE
bool "Support ADS Sphere"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the ADS
Sphere board.
+config MACH_EDB93XX
+ bool
+
+config MACH_EDB9301
+ bool "Support Cirrus Logic EDB9301"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9301 Evaluation Board.
+
config MACH_EDB9302
bool "Support Cirrus Logic EDB9302"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302 Evaluation Board.
config MACH_EDB9302A
bool "Support Cirrus Logic EDB9302A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302A Evaluation Board.
config MACH_EDB9307
bool "Support Cirrus Logic EDB9307"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307 Evaluation Board.
config MACH_EDB9307A
bool "Support Cirrus Logic EDB9307A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307A Evaluation Board.
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9312 Evaluation Board.
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
config MACH_EDB9315A
bool "Support Cirrus Logic EDB9315A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315A Evaluation Board.
config MACH_GESBC9312
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "Support Glomation GESBC-9312-sx"
help
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
config MACH_MICRO9
- bool
- default n
+ bool
config MACH_MICRO9H
- bool "Support Contec Hypercontrol Micro9-H"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-H board.
+ bool "Support Contec Hypercontrol Micro9-H"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-H board.
config MACH_MICRO9M
- bool "Support Contec Hypercontrol Micro9-M"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-M board.
+ bool "Support Contec Hypercontrol Micro9-M"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-M board.
config MACH_MICRO9L
- bool "Support Contec Hypercontrol Micro9-L"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-L board.
+ bool "Support Contec Hypercontrol Micro9-L"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-L board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 9522e205b73..eae6199a989 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -7,13 +7,7 @@ obj-n :=
obj- :=
obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
-obj-$(CONFIG_MACH_EDB9302) += edb9302.o
-obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o
-obj-$(CONFIG_MACH_EDB9307) += edb9307.o
-obj-$(CONFIG_MACH_EDB9307A) += edb9307a.o
-obj-$(CONFIG_MACH_EDB9312) += edb9312.o
-obj-$(CONFIG_MACH_EDB9315) += edb9315.o
-obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
+obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_MICRO9) += micro9.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index d5561ad15ba..27a085a8f12 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -1,2 +1,5 @@
- zreladdr-y := 0x00008000
-params_phys-y := 0x00000100
+ zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000
+params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
+params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index e8ebeaea6c4..6c4c1633ed1 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -21,15 +21,50 @@
#include <asm/div64.h>
#include <mach/hardware.h>
+
+/*
+ * The EP93xx has two external crystal oscillators. To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks. The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
+
+
struct clk {
unsigned long rate;
int users;
+ int sw_locked;
u32 enable_reg;
u32 enable_mask;
+
+ unsigned long (*get_rate)(struct clk *clk);
};
-static struct clk clk_uart = {
- .rate = 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+ .get_rate = get_uart_rate,
+};
+static struct clk clk_uart2 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+ .get_rate = get_uart_rate,
+};
+static struct clk clk_uart3 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+ .get_rate = get_uart_rate,
};
static struct clk clk_pll1;
static struct clk clk_f;
@@ -37,73 +72,73 @@ static struct clk clk_h;
static struct clk clk_p;
static struct clk clk_pll2;
static struct clk clk_usb_host = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = EP93XX_SYSCON_CLOCK_USH_EN,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
/* DMA Clocks */
static struct clk clk_m2p0 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00020000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
};
static struct clk clk_m2p1 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00010000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
};
static struct clk clk_m2p2 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00080000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
};
static struct clk clk_m2p3 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00040000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
};
static struct clk clk_m2p4 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00200000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
};
static struct clk clk_m2p5 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00100000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
};
static struct clk clk_m2p6 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00800000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
};
static struct clk clk_m2p7 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00400000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
};
static struct clk clk_m2p8 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x02000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
};
static struct clk clk_m2p9 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x01000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
};
static struct clk clk_m2m0 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x04000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
};
static struct clk clk_m2m1 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x08000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
};
#define INIT_CK(dev,con,ck) \
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
- INIT_CK("apb:uart1", NULL, &clk_uart),
- INIT_CK("apb:uart2", NULL, &clk_uart),
- INIT_CK("apb:uart3", NULL, &clk_uart),
+ INIT_CK("apb:uart1", NULL, &clk_uart1),
+ INIT_CK("apb:uart2", NULL, &clk_uart2),
+ INIT_CK("apb:uart3", NULL, &clk_uart3),
INIT_CK(NULL, "pll1", &clk_pll1),
INIT_CK(NULL, "fclk", &clk_f),
INIT_CK(NULL, "hclk", &clk_h),
INIT_CK(NULL, "pclk", &clk_p),
INIT_CK(NULL, "pll2", &clk_pll2),
- INIT_CK(NULL, "usb_host", &clk_usb_host),
+ INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
INIT_CK(NULL, "m2p0", &clk_m2p0),
INIT_CK(NULL, "m2p1", &clk_m2p1),
INIT_CK(NULL, "m2p2", &clk_m2p2),
@@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
+ if (clk->sw_locked)
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value | clk->enable_mask, clk->enable_reg);
}
@@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
+ if (clk->sw_locked)
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
+static unsigned long get_uart_rate(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+ if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
+ return EP93XX_EXT_CLK_RATE;
+ else
+ return EP93XX_EXT_CLK_RATE / 2;
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
@@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
unsigned long long rate;
int i;
- rate = 14745600;
+ rate = EP93XX_EXT_CLK_RATE;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
@@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
- clk_pll1.rate = 14745600;
+ clk_pll1.rate = EP93XX_EXT_CLK_RATE;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
@@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
- clk_pll2.rate = 14745600;
+ clk_pll2.rate = EP93XX_EXT_CLK_RATE;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486f858..204dc5cbd0b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3];
static unsigned char gpio_int_enabled[3];
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debouce[3];
+static unsigned char gpio_int_debounce[3];
/* Port ordering is: A B F */
static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
@@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
int port_mask = 1 << (line & 7);
if (enable)
- gpio_int_debouce[port] |= port_mask;
+ gpio_int_debounce[port] |= port_mask;
else
- gpio_int_debouce[port] &= ~port_mask;
+ gpio_int_debounce[port] &= ~port_mask;
- __raw_writeb(gpio_int_debouce[port],
+ __raw_writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
{
int gpio_irq;
- vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
- vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+ vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+ vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -450,10 +450,19 @@ static struct amba_device uart3_device = {
};
+static struct resource ep93xx_rtc_resource[] = {
+ {
+ .start = EP93XX_RTC_PHYS_BASE,
+ .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct platform_device ep93xx_rtc_device = {
- .name = "ep93xx-rtc",
- .id = -1,
- .num_resources = 0,
+ .name = "ep93xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
+ .resource = ep93xx_rtc_resource,
};
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
deleted file mode 100644
index 8bf8d7c78f1..00000000000
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302.c
- * Cirrus Logic EDB9302 support.
- *
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9302_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9302_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9302_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9302_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9302_flash);
-
- ep93xx_register_eth(&edb9302_eth_data, 1);
-}
-
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
- /* Maintainer: George Kashperko <george@chas.com.ua> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9302_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
deleted file mode 100644
index a352c57c7b4..00000000000
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302a.c
- * Cirrus Logic EDB9302A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9302a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9302a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9302a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302a_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9302a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9302a_flash);
-
- ep93xx_register_eth(&edb9302a_eth_data, 1);
-}
-
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9302a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
deleted file mode 100644
index 5ab22f63a4e..00000000000
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307.c
- * Cirrus Logic EDB9307 support.
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9307_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9307_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9307_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9307_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9307_flash);
-
- ep93xx_register_eth(&edb9307_eth_data, 1);
-}
-
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
- /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9307_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
deleted file mode 100644
index 6171167d331..00000000000
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307a.c
- * Cirrus Logic EDB9307A support.
- *
- * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9307a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9307a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9307a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307a_eth_data = {
- .phy_id = 1,
-};
-
-static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
- {
- /* On-board battery backed RTC */
- I2C_BOARD_INFO("isl1208", 0x6f),
- },
- /*
- * The I2C signals are also routed to the Expansion Connector (J4)
- */
-};
-
-static void __init edb9307a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9307a_flash);
-
- ep93xx_register_eth(&edb9307a_eth_data, 1);
-
- ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
-}
-
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
- /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9307a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
deleted file mode 100644
index d7179f66d80..00000000000
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9312.c
- * Cirrus Logic EDB9312 support.
- *
- * Copyright (C) 2006 Infosys Technologies Limited
- * Toufeeq Hussain <toufeeq_hussain@infosys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9312_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9312_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9312_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9312_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9312_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9312_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9312_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9312_flash);
-
- ep93xx_register_eth(&edb9312_eth_data, 1);
-}
-
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
- /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9312_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
deleted file mode 100644
index 025af6eaca1..00000000000
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315.c
- * Cirrus Logic EDB9315 support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9315_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9315_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9315_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9315_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9315_flash);
-
- ep93xx_register_eth(&edb9315_eth_data, 1);
-}
-
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9315_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
deleted file mode 100644
index 4c9cc8a39f5..00000000000
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315a.c
- * Cirrus Logic EDB9315A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9315a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9315a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9315a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315a_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9315a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9315a_flash);
-
- ep93xx_register_eth(&edb9315a_eth_data, 1);
-}
-
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9315a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
new file mode 100644
index 00000000000..e9e45b92457
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ * Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb93xx_flash_data;
+
+static struct resource edb93xx_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb93xx_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb93xx_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb93xx_flash_resource,
+};
+
+static void __init __edb93xx_register_flash(unsigned int width,
+ resource_size_t start, resource_size_t size)
+{
+ edb93xx_flash_data.width = width;
+ edb93xx_flash_resource.start = start;
+ edb93xx_flash_resource.end = start + size - 1;
+
+ platform_device_register(&edb93xx_flash);
+}
+
+static void __init edb93xx_register_flash(void)
+{
+ if (machine_is_edb9307() || machine_is_edb9312() ||
+ machine_is_edb9315()) {
+ __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+ } else {
+ __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+ }
+}
+
+static struct ep93xx_eth_data edb93xx_eth_data = {
+ .phy_id = 1,
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+ if (machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a()) {
+ ep93xx_register_i2c(edb93xxa_i2c_data,
+ ARRAY_SIZE(edb93xxa_i2c_data));
+ } else if (machine_is_edb9307() || machine_is_edb9312() ||
+ machine_is_edb9315()) {
+ ep93xx_register_i2c(edb93xx_i2c_data,
+ ARRAY_SIZE(edb93xx_i2c_data));
+ }
+}
+
+static void __init edb93xx_init_machine(void)
+{
+ ep93xx_init_devices();
+ edb93xx_register_flash();
+ ep93xx_register_eth(&edb93xx_eth_data, 1);
+ edb93xx_register_i2c();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+ /* Maintainer: George Kashperko <george@chas.com.ua> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+ /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+ /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index f66be12b856..967c079180d 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,19 +147,36 @@
#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
+#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 5c80c3c8158..925b12ea099 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -5,6 +5,12 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
+#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
#define PHYS_OFFSET UL(0x00000000)
+#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xc0000000)
+#else
+#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
+#endif
#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-01 01:50:39 +0000