diff options
Diffstat (limited to 'arch/arm/mach-exynos/Kconfig')
| -rw-r--r-- | arch/arm/mach-exynos/Kconfig | 42 |
1 files changed, 36 insertions, 6 deletions
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index dfad6538b27..0491ceef1cd 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -11,18 +11,19 @@ if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" -choice - prompt "EXYNOS System Type" - default ARCH_EXYNOS4 - config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" + default y select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 SoCs based systems -endchoice +config ARCH_EXYNOS5 + bool "SAMSUNG EXYNOS5" + select HAVE_SMP + help + Samsung EXYNOS5 (Cortex-A15) SoC based systems comment "EXYNOS SoCs" @@ -42,6 +43,7 @@ config SOC_EXYNOS4212 bool "SAMSUNG EXYNOS4212" default y depends on ARCH_EXYNOS4 + select SAMSUNG_DMADEV select S5P_PM if PM select S5P_SLEEP if PM help @@ -51,9 +53,17 @@ config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 + select SAMSUNG_DMADEV help Enable EXYNOS4412 SoC support +config SOC_EXYNOS5250 + bool "SAMSUNG EXYNOS5250" + default y + depends on ARCH_EXYNOS5 + help + Enable EXYNOS5250 SoC support + config EXYNOS4_MCT bool default y @@ -179,7 +189,9 @@ config MACH_SMDKV310 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI @@ -225,7 +237,9 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 @@ -262,11 +276,14 @@ config MACH_NURI select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S3C_DEV_I2C6 select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY @@ -276,6 +293,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_I2C6 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select S5P_SETUP_MIPIPHY @@ -296,7 +314,9 @@ config MACH_ORIGEN select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 select S5P_DEV_FIMD0 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI @@ -325,6 +345,7 @@ config MACH_SMDK4212 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM + select EXYNOS4_DEV_DMA select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C7 @@ -343,7 +364,7 @@ config MACH_SMDK4412 Machine support for Samsung SMDK4412 endif -comment "Flattened Device Tree based board for Exynos4 based SoC" +comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" @@ -357,6 +378,15 @@ config MACH_EXYNOS4_DT Note: This is under development and not all peripherals can be supported with this machine file. +config MACH_EXYNOS5_DT + bool "SAMSUNG EXYNOS5 Machine using device tree" + select SOC_EXYNOS5250 + select USE_OF + select ARM_AMBA + help + Machine support for Samsung Exynos4 machine with device tree enabled. + Select this if a fdt blob is available for the EXYNOS4 SoC based board. + if ARCH_EXYNOS4 comment "Configuration for HSMMC 8-bit bus width" |