diff options
Diffstat (limited to 'arch/arm/mach-imx/Kconfig')
| -rw-r--r-- | arch/arm/mach-imx/Kconfig | 110 |
1 files changed, 107 insertions, 3 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8d276584650..1ad0d76de8c 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,3 +1,70 @@ +config ARCH_MXC + bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 + select ARCH_REQUIRE_GPIOLIB + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR if !ZBOOT_ROM + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select USE_OF + help + Support for Freescale MXC/iMX-based family of processors + +menu "Freescale i.MX support" + depends on ARCH_MXC + +config MXC_IRQ_PRIOR + bool "Use IRQ priority" + help + Select this if you want to use prioritized IRQ handling. + This feature prevents higher priority ISR to be interrupted + by lower priority IRQ even IRQF_DISABLED flag is not set. + This may be useful in embedded applications, where are strong + requirements for timing. + Say N here, unless you have a specialized requirement. + +config MXC_TZIC + bool + +config MXC_AVIC + bool + +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + +config HAVE_EPIT + bool + +config MXC_USE_EPIT + bool "Use EPIT instead of GPT" + depends on HAVE_EPIT + help + Use EPIT as the system timer on systems that have it. Normally you + don't have a reason to do so as the EPIT has the same features and + uses the same clocks as the GPT. Anyway, on some systems the GPT + may be in use for other purposes. + +config MXC_ULPI + bool + +config ARCH_HAS_RNGA + bool + +config IRAM_ALLOC + bool + select GENERIC_ALLOCATOR + config HAVE_IMX_GPC bool @@ -5,6 +72,12 @@ config HAVE_IMX_MMDC bool config HAVE_IMX_SRC + def_bool y if SMP + +config IMX_HAVE_IOMUX_V1 + bool + +config ARCH_MXC_IOMUX_V3 bool config ARCH_MX1 @@ -104,7 +177,7 @@ config SOC_IMX51 select PINCTRL_IMX51 select SOC_IMX5 -if ARCH_IMX_V4_V5 +if ARCH_MULTI_V4T comment "MX1 platforms:" config MACH_MXLADS @@ -133,6 +206,10 @@ config MACH_APF9328 help Say Yes here if you are using the Armadeus APF9328 development board +endif + +if ARCH_MULTI_V5 + comment "MX21 platforms:" config MACH_MX21ADS @@ -195,6 +272,13 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD endchoice +config MACH_IMX25_DT + bool "Support i.MX25 platforms from device tree" + select SOC_IMX25 + help + Include support for Freescale i.MX25 based platforms + using the device tree for discovery + comment "MX27 platforms:" config MACH_MX27ADS @@ -317,6 +401,7 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA + select IMX_HAVE_PLATFORM_MX2_EMMA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select LEDS_GPIO_REGISTER @@ -384,7 +469,7 @@ config MACH_IMX27_DT endif -if ARCH_IMX_V6_V7 +if ARCH_MULTI_V6 comment "MX31 platforms:" @@ -649,6 +734,10 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +endif + +if ARCH_MULTI_V7 + comment "i.MX5 platforms:" config MACH_MX50_RDP @@ -739,6 +828,7 @@ config SOC_IMX53 select ARCH_MX5 select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN + select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL select PINCTRL_IMX53 select SOC_IMX5 @@ -748,7 +838,14 @@ config SOC_IMX53 config SOC_IMX6Q bool "i.MX6 Quad support" + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM + select ARM_ERRATA_743622 + select ARM_ERRATA_751472 + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 select ARM_GIC select COMMON_CLK select CPU_V7 @@ -756,13 +853,20 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC - select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL select PINCTRL_IMX6Q + select PL310_ERRATA_588369 if CACHE_PL310 + select PL310_ERRATA_727915 if CACHE_PL310 + select PL310_ERRATA_769419 if CACHE_PL310 + select PM_OPP if PM help This enables support for Freescale i.MX6 Quad processor. endif + +source "arch/arm/mach-imx/devices/Kconfig" + +endmenu |