diff options
Diffstat (limited to 'arch/arm/mach-imx/headsmp.S')
| -rw-r--r-- | arch/arm/mach-imx/headsmp.S | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S new file mode 100644 index 00000000000..7e49deb128a --- /dev/null +++ b/arch/arm/mach-imx/headsmp.S @@ -0,0 +1,106 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> + + .section ".text.head", "ax" + +/* + * The secondary kernel init calls v7_flush_dcache_all before it enables + * the L1; however, the L1 comes out of reset in an undefined state, so + * the clean + invalidate performed by v7_flush_dcache_all causes a bunch + * of cache lines with uninitialized data and uninitialized tags to get + * written out to memory, which does really unpleasant things to the main + * processor. We fix this by performing an invalidate, rather than a + * clean + invalidate, before jumping into the kernel. + * + * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs + * to be called for both secondary cores startup and primary core resume + * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. + */ +ENTRY(v7_invalidate_l1) + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + ldr r1, =0x7fff + and r2, r1, r0, lsr #13 + + ldr r1, =0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) + mcr p15, 0, r5, c7, c6, 2 + bgt 2b + cmp r2, #0 + bgt 1b + dsb + isb + mov pc, lr +ENDPROC(v7_invalidate_l1) + +#ifdef CONFIG_SMP +ENTRY(v7_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(v7_secondary_startup) +#endif + +#ifdef CONFIG_PM +/* + * The following code is located into the .data section. This is to + * allow phys_l2x0_saved_regs to be accessed with a relative load + * as we are running on physical address here. + */ + .data + .align + +#ifdef CONFIG_CACHE_L2X0 + .macro pl310_resume + ldr r2, phys_l2x0_saved_regs + ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 + ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value + str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl + mov r1, #0x1 + str r1, [r0, #L2X0_CTRL] @ re-enable L2 + .endm + + .globl phys_l2x0_saved_regs +phys_l2x0_saved_regs: + .long 0 +#else + .macro pl310_resume + .endm +#endif + +ENTRY(v7_cpu_resume) + bl v7_invalidate_l1 + pl310_resume + b cpu_resume +ENDPROC(v7_cpu_resume) +#endif |