1 files changed, 107 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/include/mach/dma-v1.h b/arch/arm/mach-imx/include/mach/dma-v1.h
new file mode 100644
index 00000000000..287431cc13e
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-v1.h
@@ -0,0 +1,107 @@
+/*
+ *  linux/arch/arm/mach-imx/include/mach/dma-v1.h
+ *
+ *  i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_DMA_V1_H__
+#define __MACH_DMA_V1_H__
+
+#define imx_has_dma_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+
+#define IMX_DMA_CHANNELS  16
+
+#define DMA_MODE_READ		0
+#define DMA_MODE_WRITE		1
+#define DMA_MODE_MASK		1
+
+#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
+
+#define IMX_DMA_MEMSIZE_32	(0 << 4)
+#define IMX_DMA_MEMSIZE_8	(1 << 4)
+#define IMX_DMA_MEMSIZE_16	(2 << 4)
+#define IMX_DMA_TYPE_LINEAR	(0 << 10)
+#define IMX_DMA_TYPE_2D		(1 << 10)
+#define IMX_DMA_TYPE_FIFO	(2 << 10)
+
+#define IMX_DMA_ERR_BURST     (1 << 0)
+#define IMX_DMA_ERR_REQUEST   (1 << 1)
+#define IMX_DMA_ERR_TRANSFER  (1 << 2)
+#define IMX_DMA_ERR_BUFFER    (1 << 3)
+#define IMX_DMA_ERR_TIMEOUT   (1 << 4)
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+	unsigned int config_mem, unsigned int dmareq, int hw_chaining);
+
+void
+imx_dma_config_burstlen(int channel, unsigned int burstlen);
+
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+		unsigned int dma_length, unsigned int dev_addr,
+		unsigned int dmamode);
+
+
+/*
+ * Use this flag as the dma_length argument to imx_dma_setup_sg()
+ * to create an endless running dma loop. The end of the scatterlist
+ * must be linked to the beginning for this to work.
+ */
+#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
+
+int
+imx_dma_setup_sg(int channel, struct scatterlist *sg,
+		unsigned int sgcount, unsigned int dma_length,
+		unsigned int dev_addr, unsigned int dmamode);
+
+int
+imx_dma_setup_handlers(int channel,
+		void (*irq_handler) (int, void *),
+		void (*err_handler) (int, void *, int), void *data);
+
+int
+imx_dma_setup_progression_handler(int channel,
+		void (*prog_handler) (int, void*, struct scatterlist*));
+
+void imx_dma_enable(int channel);
+
+void imx_dma_disable(int channel);
+
+int imx_dma_request(int channel, const char *name);
+
+void imx_dma_free(int channel);
+
+enum imx_dma_prio {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+};
+
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
+
+#endif	/* __MACH_DMA_V1_H__ */