diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-mx31lite.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-mx31lite.c | 287 |
1 files changed, 287 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c new file mode 100644 index 00000000000..ac9b4cad320 --- /dev/null +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -0,0 +1,287 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/memory.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/mtd/physmap.h> +#include <linux/delay.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/page.h> +#include <asm/setup.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/board-mx31lite.h> +#include <mach/iomux-mx3.h> +#include <mach/irqs.h> +#include <mach/ulpi.h> + +#include "devices-imx31.h" + +/* + * This file contains the module-specific initialization routines. + */ + +static unsigned int mx31lite_pins[] = { + /* LAN9117 IRQ pin */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), + /* SPI 1 */ + MX31_PIN_CSPI2_SCLK__SCLK, + MX31_PIN_CSPI2_MOSI__MOSI, + MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, + MX31_PIN_CSPI2_SS1__SS1, + MX31_PIN_CSPI2_SS2__SS2, +}; + +static const struct mxc_nand_platform_data +mx31lite_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT, +}; + +static struct resource smsc911x_resources[] = { + { + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +/* + * SPI + * + * The MC13783 is the only hard-wired SPI device on the module. + */ + +static int spi_internal_chipselect[] = { + MXC_SPI_CS(0), +}; + +static const struct spi_imx_master spi1_pdata __initconst = { + .chipselect = spi_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), +}; + +static struct mc13xxx_platform_data mc13783_pdata __initdata = { + .flags = MC13XXX_USE_RTC | + MC13XXX_USE_REGULATOR, +}; + +static struct spi_board_info mc13783_spi_dev __initdata = { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .platform_data = &mc13783_pdata, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), +}; + +/* + * USB + */ + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbh2_init(struct platform_device *pdev) +{ + int pins[] = { + MX31_PIN_USBH2_DATA0__USBH2_DATA0, + MX31_PIN_USBH2_DATA1__USBH2_DATA1, + MX31_PIN_USBH2_CLK__USBH2_CLK, + MX31_PIN_USBH2_DIR__USBH2_DIR, + MX31_PIN_USBH2_NXT__USBH2_NXT, + MX31_PIN_USBH2_STP__USBH2_STP, + }; + + mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + /* chip select */ + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), + "USBH2_CS"); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, +}; + +/* + * NOR flash + */ + +static struct physmap_flash_data nor_flash_data = { + .width = 2, +}; + +static struct resource nor_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device physmap_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_flash_data, + }, + .resource = &nor_flash_resource, + .num_resources = 1, +}; + + + +/* + * This structure defines the MX31 memory map. + */ +static struct map_desc mx31lite_io_desc[] __initdata = { + { + .virtual = MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE, + .type = MT_DEVICE + } +}; + +/* + * Set up static virtual mappings. + */ +void __init mx31lite_map_io(void) +{ + mx31_map_io(); + iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); +} + +static int mx31lite_baseboard; +core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); + +static void __init mx31lite_init(void) +{ + int ret; + + switch (mx31lite_baseboard) { + case MX31LITE_NOBOARD: + break; + case MX31LITE_DB: + mx31lite_db_init(); + break; + default: + printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n", + mx31lite_baseboard); + } + + mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), + "mx31lite"); + + /* NOR and NAND flash */ + platform_device_register(&physmap_flash_device); + imx31_add_mxc_nand(&mx31lite_nand_board_info); + + imx31_add_spi_imx1(&spi1_pdata); + spi_register_board_info(&mc13783_spi_dev, 1); + + /* USB */ + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); + + /* SMSC9117 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + platform_device_register(&smsc911x_device); + } +} + +static void __init mx31lite_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +struct sys_timer mx31lite_timer = { + .init = mx31lite_timer_init, +}; + +MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") + /* Maintainer: Freescale Semiconductor, Inc. */ + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31lite_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31lite_timer, + .init_machine = mx31lite_init, +MACHINE_END |