diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-mx53_smd.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-mx53_smd.c | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c deleted file mode 100644 index b15d6a6d3b6..00000000000 --- a/arch/arm/mach-imx/mach-mx53_smd.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/gpio.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx53.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "devices-imx53.h" - -#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3) - -static iomux_v3_cfg_t mx53_smd_pads[] = { - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - MX53_PAD_PATA_DA_1__UART3_CTS, - MX53_PAD_PATA_DA_2__UART3_RTS, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - /* SD1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD2 */ - MX53_PAD_SD2_CMD__ESDHC2_CMD, - MX53_PAD_SD2_CLK__ESDHC2_CLK, - MX53_PAD_SD2_DATA0__ESDHC2_DAT0, - MX53_PAD_SD2_DATA1__ESDHC2_DAT1, - MX53_PAD_SD2_DATA2__ESDHC2_DAT2, - MX53_PAD_SD2_DATA3__ESDHC2_DAT3, - /* SD3 */ - MX53_PAD_PATA_DATA8__ESDHC3_DAT0, - MX53_PAD_PATA_DATA9__ESDHC3_DAT1, - MX53_PAD_PATA_DATA10__ESDHC3_DAT2, - MX53_PAD_PATA_DATA11__ESDHC3_DAT3, - MX53_PAD_PATA_DATA0__ESDHC3_DAT4, - MX53_PAD_PATA_DATA1__ESDHC3_DAT5, - MX53_PAD_PATA_DATA2__ESDHC3_DAT6, - MX53_PAD_PATA_DATA3__ESDHC3_DAT7, - MX53_PAD_PATA_IORDY__ESDHC3_CLK, - MX53_PAD_PATA_RESET_B__ESDHC3_CMD, -}; - -static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static inline void mx53_smd_init_uart(void) -{ - imx53_add_imx_uart(0, NULL); - imx53_add_imx_uart(1, NULL); - imx53_add_imx_uart(2, &mx53_smd_uart_data); -} - -static inline void mx53_smd_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - gpio_direction_output(SMD_FEC_PHY_RST, 0); - msleep(1); - gpio_set_value(SMD_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_smd_fec_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { - .bitrate = 100000, -}; - -static inline void mx53_smd_ahci_pwr_on(void) -{ - int ret; - - /* Enable SATA PWR */ - ret = gpio_request_one(MX53_SMD_SATA_PWR_EN, - GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr"); - if (ret) { - pr_err("failed to enable SATA_PWR_EN: %d\n", ret); - return; - } -} - -void __init imx53_smd_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, - ARRAY_SIZE(mx53_smd_pads)); -} - -static void __init mx53_smd_board_init(void) -{ - imx53_soc_init(); - imx53_smd_common_init(); - - mx53_smd_init_uart(); - mx53_smd_fec_reset(); - imx53_add_fec(&mx53_smd_fec_data); - imx53_add_imx2_wdt(0); - imx53_add_imx_i2c(0, &mx53_smd_i2c_data); - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(1, NULL); - imx53_add_sdhci_esdhc_imx(2, NULL); - mx53_smd_ahci_pwr_on(); - imx53_add_ahci_imx(); -} - -static void __init mx53_smd_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_smd_timer = { - .init = mx53_smd_timer_init, -}; - -MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_smd_timer, - .init_machine = mx53_smd_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END |