diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-pca100.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-pca100.c | 17 |
1 files changed, 6 insertions, 11 deletions
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 23c9e1f37b9..8c720d44602 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -38,7 +38,6 @@ #include <mach/iomux-mx27.h> #include <asm/mach/time.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include <mach/mxc_nand.h> #include <mach/irqs.h> #include <mach/mmc.h> @@ -55,7 +54,7 @@ #define SPI1_SS1 (GPIO_PORTD + 27) #define SD2_CD (GPIO_PORTC + 29) -static int pca100_pins[] = { +static const int pca100_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -174,7 +173,6 @@ pca100_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &mxc_w1_master_device, - &mxc_fec_device, &mxc_wdt, }; @@ -193,11 +191,9 @@ static struct i2c_board_info pca100_i2c_devices[] = { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), - .type = "pcf8563" + I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("lm75", 0x4a), - .type = "lm75" } }; @@ -252,7 +248,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) msleep(2); } -static struct imx_ssi_platform_data pca100_ssi_pdata = { +static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = { .ac97_reset = pca100_ac97_cold_reset, .ac97_warm_reset = pca100_ac97_warm_reset, .flags = IMX_SSI_USE_AC97, @@ -389,7 +385,7 @@ static void __init pca100_init(void) if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); - mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata); + imx27_add_imx_ssi(0, &pca100_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); @@ -401,7 +397,7 @@ static void __init pca100_init(void) i2c_register_board_info(1, pca100_i2c_devices, ARRAY_SIZE(pca100_i2c_devices)); - imx27_add_i2c_imx1(&pca100_i2c1_data); + imx27_add_imx_i2c(1, &pca100_i2c1_data); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); @@ -436,6 +432,7 @@ static void __init pca100_init(void) mxc_register_device(&mxc_fb_device, &pca100_fb_data); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -449,8 +446,6 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, |