diff options
Diffstat (limited to 'arch/arm/mach-imx/mm-imx5.c')
| -rw-r--r-- | arch/arm/mach-imx/mm-imx5.c | 32 |
1 files changed, 28 insertions, 4 deletions
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index acb0aadb425..79d71cf23a1 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/iomux-v3.h> +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v3.h" /* * Define the MX50 memory map. @@ -81,8 +81,28 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } +/* + * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by + * the Freescale marketing division. However this did not remove the + * hardware from the chip which still needs to be configured for proper + * IPU support. + */ +static void __init imx51_ipu_mipi_setup(void) +{ + void __iomem *hsc_addr; + hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR); + + /* setup MIPI module to legacy mode */ + __raw_writel(0xf00, hsc_addr); + + /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ + __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff, + hsc_addr + 0x800); +} + void __init imx51_init_early(void) { + imx51_ipu_mipi_setup(); mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); @@ -138,6 +158,8 @@ static const struct resource imx51_audmux_res[] __initconst = { void __init imx50_soc_init(void) { + mxc_device_init(); + /* i.mx50 has the i.mx35 type gpio */ mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); @@ -153,6 +175,8 @@ void __init imx50_soc_init(void) void __init imx51_soc_init(void) { + mxc_device_init(); + /* i.mx51 has the i.mx35 type gpio */ mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); |