diff options
Diffstat (limited to 'arch/arm/mach-imx')
45 files changed, 330 insertions, 2630 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index afd542ad6f9..8d276584650 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -41,73 +41,68 @@ config SOC_IMX1 config SOC_IMX21 bool - select MACH_MX21 - select CPU_ARM926T select COMMON_CLK + select CPU_ARM926T select IMX_HAVE_IOMUX_V1 + select MACH_MX21 select MXC_AVIC config SOC_IMX25 bool select ARCH_MX25 + select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_ARM926T select HAVE_CAN_FLEXCAN if CAN - select ARCH_MXC_IOMUX_V3 select MXC_AVIC config SOC_IMX27 bool - select MACH_MX27 - select CPU_ARM926T select COMMON_CLK + select CPU_ARM926T select IMX_HAVE_IOMUX_V1 + select MACH_MX27 select MXC_AVIC config SOC_IMX31 bool + select COMMON_CLK select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select MXC_AVIC - select COMMON_CLK select SMP_ON_UP if SMP config SOC_IMX35 bool - select CPU_V6K select ARCH_MXC_IOMUX_V3 select COMMON_CLK + select CPU_V6K + select HAVE_CAN_FLEXCAN if CAN select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP - select HAVE_CAN_FLEXCAN if CAN config SOC_IMX5 - select CPU_V7 - select MXC_TZIC - select COMMON_CLK - select ARCH_MXC_IOMUX_V3 + bool select ARCH_HAS_CPUFREQ select ARCH_MX5 - bool + select ARCH_MXC_IOMUX_V3 + select COMMON_CLK + select CPU_V7 + select MXC_TZIC config SOC_IMX50 bool - select SOC_IMX5 select ARCH_MX50 + select SOC_IMX5 config SOC_IMX51 bool - select SOC_IMX5 select ARCH_MX5 select ARCH_MX51 - -config SOC_IMX53 - bool + select PINCTRL + select PINCTRL_IMX51 select SOC_IMX5 - select ARCH_MX5 - select ARCH_MX53 - select HAVE_CAN_FLEXCAN if CAN if ARCH_IMX_V4_V5 @@ -117,10 +112,10 @@ config MACH_MXLADS config ARCH_MX1ADS bool "MX1ADS platform" - select MACH_MXLADS - select SOC_IMX1 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select MACH_MXLADS + select SOC_IMX1 help Say Y here if you are using Motorola MX1ADS/MXLADS boards @@ -132,9 +127,9 @@ config MACH_SCB9328 config MACH_APF9328 bool "APF9328" - select SOC_IMX1 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX1 help Say Yes here if you are using the Armadeus APF9328 development board @@ -142,11 +137,11 @@ comment "MX21 platforms:" config MACH_MX21ADS bool "MX21ADS platform" - select SOC_IMX21 select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND + select SOC_IMX21 help Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. @@ -155,22 +150,21 @@ comment "MX25 platforms:" config MACH_MX25_3DS bool "Support MX25PDK (3DS) Platform" - select SOC_IMX25 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select SOC_IMX25 config MACH_EUKREA_CPUIMX25SD bool "Support Eukrea CPUIMX25 Platform" - select SOC_IMX25 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT @@ -182,6 +176,7 @@ config MACH_EUKREA_CPUIMX25SD select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX25 choice prompt "Baseboard" @@ -204,20 +199,19 @@ comment "MX27 platforms:" config MACH_MX27ADS bool "MX27ADS platform" - select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 + select SOC_IMX27 help Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. config MACH_PCM038 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" - select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART @@ -226,6 +220,7 @@ config MACH_PCM038 select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX27 help Include support for phyCORE-i.MX27 (aka pcm038) platform. This includes specific configurations for the module and its peripherals. @@ -247,7 +242,6 @@ endchoice config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" - select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -256,6 +250,7 @@ config MACH_CPUIMX27 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select MXC_ULPI if USB_ULPI + select SOC_IMX27 help Include support for Eukrea CPUIMX27 platform. This includes specific configurations for the module and its peripherals. @@ -297,12 +292,12 @@ endchoice config MACH_MX27_3DS bool "MX27PDK platform" - select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI @@ -310,13 +305,13 @@ config MACH_MX27_3DS select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD select MXC_ULPI if USB_ULPI + select SOC_IMX27 help Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. config MACH_IMX27_VISSTRIM_M10 bool "Vista Silicon i.MX27 Visstrim_m10" - select SOC_IMX27 select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI @@ -325,6 +320,7 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select LEDS_GPIO_REGISTER + select SOC_IMX27 help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its @@ -332,16 +328,15 @@ config MACH_IMX27_VISSTRIM_M10 config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" - select SOC_IMX27 - select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX27 help Include support for MX27 LITEKIT platform. This includes specific configurations for the board and its peripherals. config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" - select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB @@ -354,27 +349,28 @@ config MACH_PCA100 select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX27 help Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. config MACH_MXT_TD60 bool "Maxtrack i-MXT TD60" - select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND + select SOC_IMX27 help Include support for i-MXT (aka td60) platform. This includes specific configurations for the module and its peripherals. config MACH_IMX27IPCAM bool "IMX27 IPCAM platform" - select SOC_IMX27 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX27 help Include support for IMX27 IPCAM platform. This includes specific configurations for the board and its peripherals. @@ -394,11 +390,11 @@ comment "MX31 platforms:" config MACH_MX31ADS bool "Support MX31ADS platforms" - select SOC_IMX31 + default y select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART - default y + select SOC_IMX31 help Include support for MX31ADS platform. This includes specific configurations for the board and its peripherals. @@ -416,21 +412,19 @@ config MACH_MX31ADS_WM1133_EV1 config MACH_MX31LILLY bool "Support MX31 LILLY-1131 platforms (INCO startec)" - select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for mx31 based LILLY1131 modules. This includes specific configurations for the board and its peripherals. config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" - select SOC_IMX31 - select MXC_ULPI if USB_ULPI select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI @@ -439,13 +433,14 @@ config MACH_MX31LITE select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER + select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" - select SOC_IMX31 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -456,6 +451,7 @@ config MACH_PCM037 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. @@ -472,8 +468,6 @@ config MACH_PCM037_EET config MACH_MX31_3DS bool "Support MX31PDK (3DS)" - select SOC_IMX31 - select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -485,7 +479,9 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. @@ -501,7 +497,6 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" - select SOC_IMX31 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -513,22 +508,22 @@ config MACH_MX31MOBOARD select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. config MACH_ARMADILLO5X0 bool "Support Atmark Armadillo-500 Development Base Board" - select SOC_IMX31 select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART @@ -537,23 +532,24 @@ config MACH_ARMADILLO5X0 select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI + select SOC_IMX31 help Include support for Atmark Armadillo-500 platform. This includes specific configurations for the board and its peripherals. config MACH_KZM_ARM11_01 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" - select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 help Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. config MACH_BUG bool "Support Buglabs BUGBase platform" - select SOC_IMX31 - select IMX_HAVE_PLATFORM_IMX_UART default y + select IMX_HAVE_PLATFORM_IMX_UART + select SOC_IMX31 help Include support for BUGBase 1.3 platform. This includes specific configurations for the board and its peripherals. @@ -561,7 +557,6 @@ config MACH_BUG config MACH_IMX31_DT bool "Support i.MX31 platforms from device tree" select SOC_IMX31 - select USE_OF help Include support for Freescale i.MX31 based platforms using the device tree for discovery. @@ -570,7 +565,6 @@ comment "MX35 platforms:" config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" - select SOC_IMX35 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT @@ -582,14 +576,13 @@ config MACH_PCM043 select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX35 help Include support for Phytec pcm043 platform. This includes specific configurations for the board and its peripherals. config MACH_MX35_3DS bool "Support MX35PDK platform" - select SOC_IMX35 - select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB @@ -600,13 +593,14 @@ config MACH_MX35_3DS select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select MXC_DEBUG_BOARD + select SOC_IMX35 help Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. config MACH_EUKREA_CPUIMX35SD bool "Support Eukrea CPUIMX35 Platform" - select SOC_IMX35 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT @@ -616,6 +610,7 @@ config MACH_EUKREA_CPUIMX35SD select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_ULPI if USB_ULPI + select SOC_IMX35 help Include support for Eukrea CPUIMX35 platform. This includes specific configurations for the board and its peripherals. @@ -640,16 +635,16 @@ endchoice config MACH_VPR200 bool "Support VPR200 platform" - select SOC_IMX35 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select SOC_IMX35 help Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. @@ -659,11 +654,11 @@ comment "i.MX5 platforms:" config MACH_MX50_RDP bool "Support MX50 reference design platform" depends on BROKEN - select SOC_IMX50 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select SOC_IMX50 help Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. @@ -672,15 +667,14 @@ comment "i.MX51 machines:" config MACH_IMX51_DT bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 select MACH_MX51_BABBAGE + select SOC_IMX51 help Include support for Freescale i.MX51 based platforms using the device tree for discovery config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" - select SOC_IMX51 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C @@ -688,6 +682,7 @@ config MACH_MX51_BABBAGE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select SOC_IMX51 help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its @@ -695,27 +690,27 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" - select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD + select SOC_IMX51 help Include support for MX51PDK (3DS) platform. This includes specific configurations for the board and its peripherals. config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" - select SOC_IMX51 select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX + select SOC_IMX51 help Include support for Eukrea CPUIMX51SD platform. This includes specific configurations for the module and its peripherals. @@ -737,95 +732,19 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD endchoice -config MX51_EFIKA_COMMON - bool - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_PATA_IMX - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika MX nettop. This includes specific - configurations for the board and its peripherals. - -config MACH_MX51_EFIKASB - bool "Support MX51 Genesi Efika Smartbook" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika Smartbook. This includes specific - configurations for the board and its peripherals. - -comment "i.MX53 machines:" - -config MACH_IMX53_DT - bool "Support i.MX53 platforms from device tree" - select SOC_IMX53 - select MACH_MX53_ARD - select MACH_MX53_EVK - select MACH_MX53_LOCO - select MACH_MX53_SMD - help - Include support for Freescale i.MX53 based platforms - using the device tree for discovery +comment "Device tree only" -config MACH_MX53_EVK - bool "Support MX53 EVK platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - Include support for MX53 EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_SMD - bool "Support MX53 SMD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX53 SMD platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_LOCO - bool "Support MX53 LOCO platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - select LEDS_GPIO_REGISTER - help - Include support for MX53 LOCO platform. This includes specific - configurations for the board and its peripherals. +config SOC_IMX53 + bool "i.MX53 support" + select ARCH_MX5 + select ARCH_MX53 + select HAVE_CAN_FLEXCAN if CAN + select PINCTRL + select PINCTRL_IMX53 + select SOC_IMX5 -config MACH_MX53_ARD - bool "Support MX53 ARD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS help - Include support for MX53 ARD platform. This includes specific - configurations for the board and its peripherals. - -comment "i.MX6 family:" + This enables support for Freescale i.MX53 processor. config SOC_IMX6Q bool "i.MX6 Quad support" @@ -839,7 +758,7 @@ config SOC_IMX6Q select HAVE_IMX_MMDC select HAVE_IMX_SRC select HAVE_SMP - select MFD_ANATOP + select MFD_SYSCON select PINCTRL select PINCTRL_IMX6Q diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index d004d37ad9d..895754aeb4f 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -13,7 +13,7 @@ imx5-pm-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ - clk-pfd.o clk-busy.o + clk-pfd.o clk-busy.o clk.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -83,16 +83,9 @@ endif # i.MX5 based machines obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o -obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o -obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o -obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o -obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o -obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o -obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o -obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o +obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 05541cf4a87..b27815de847 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -37,10 +37,3 @@ initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 - -dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb -dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ - imx53-qsb.dtb imx53-smd.dtb -dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index ea13e61bd5f..cf65148bc51 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -23,7 +23,6 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/clkdev.h> #include <linux/err.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index fdd8cc87c9f..d20d4795f4e 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -222,10 +222,8 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); @@ -243,6 +241,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index f69ca468004..3b6b640eed2 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -239,8 +239,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0"); - clk_register_clkdev(clk[vpu_baud_gate], "per", "imx-vpu"); - clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "imx-vpu"); + clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0"); + clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0"); clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma"); clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma"); clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb10ba..177259b523c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -62,8 +62,8 @@ enum mx35_clks { kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate, rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate, ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate, - wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate, - clk_max + wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate, + gpu2d_gate, clk_max }; static struct clk *clk[clk_max]; @@ -142,6 +142,9 @@ int __init mx35_clocks_init() clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4); + clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel)); + clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6); + clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0); clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2); clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4); @@ -192,7 +195,7 @@ int __init mx35_clocks_init() clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26); clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30); - clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3, 0); + clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3, 0); clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2); clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4); @@ -228,12 +231,11 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); @@ -255,6 +257,7 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); clk_prepare_enable(clk[spba_gate]); clk_prepare_enable(clk[gpio1_gate]); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 4bdcaa97bd9..a0bf84803ea 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -39,16 +39,17 @@ static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", }; static const char *emi_slow_sel[] = { "main_bus", "ahb", }; static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", }; static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", }; -static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", }; +static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", }; static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", }; -static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", }; +static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", }; static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", }; static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", }; static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", }; static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; +static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", }; enum imx5_clks { dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred, @@ -82,6 +83,7 @@ enum imx5_clks { ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate, ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate, + can_sel, can1_serial_gate, can1_ipg_gate, clk_max }; @@ -367,6 +369,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi"); + clk_register_clkdev(clk[nfc_gate], NULL, "83fdb000.nand"); /* set the usboh3 parent to pll2_sw */ clk_set_parent(clk[usboh3_sel], clk[pll2_sw]); @@ -421,8 +424,12 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14); clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10); clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12); - clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6); - clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8); + clk[can_sel] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2, + mx53_can_sel, ARRAY_SIZE(mx53_can_sel)); + clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22); + clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20); + clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8); + clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6); clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); for (i = 0; i < ARRAY_SIZE(clk); i++) @@ -455,6 +462,11 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); + clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand"); + clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can"); + clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can"); + clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can"); + clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4233d9e3531..3ec242f3341 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -157,6 +157,7 @@ enum mx6q_clks { }; static struct clk *clk[clk_max]; +static struct clk_onecell_data clk_data; static enum mx6q_clks const clks_init_on[] __initconst = { mmdc_ch0_axi, rom, @@ -394,52 +395,24 @@ int __init mx6q_clocks_init(void) pr_err("i.MX6q clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); - clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh"); - clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand"); - clk_register_clkdev(clk[usboh3], NULL, "2184000.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184200.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184400.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184600.usb"); - clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy"); - clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy"); - clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial"); - clk_register_clkdev(clk[enet], NULL, "2188000.ethernet"); - clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc"); - clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc"); - clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc"); - clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc"); - clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c"); - clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c"); - clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c"); - clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi"); - clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi"); - clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi"); - clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi"); - clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi"); - clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma"); - clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog"); - clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog"); - clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi"); clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); + /* + * The gpmi needs 100MHz frequency in the EDO/Sync mode, + * We can not get the 100MHz from the pll2_pfd0_352m. + * So choose pll2_pfd2_396m as enfc_sel's parent. + */ + clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]); + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index 2d856f9ccf5..02be7317891 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -6,7 +6,7 @@ #include <linux/err.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/clock.h> + #include "clk.h" /** @@ -29,8 +29,53 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pllv1 *pll = to_clk_pllv1(hw); + long long ll; + int mfn_abs; + unsigned int mfi, mfn, mfd, pd; + u32 reg; + unsigned long rate; + + reg = readl(pll->base); + + /* + * Get the resulting clock rate from a PLL register value and the input + * frequency. PLLs with this register layout can be found on i.MX1, + * i.MX21, i.MX27 and i,MX31 + * + * mfi + mfn / (mfd + 1) + * f = 2 * f_ref * -------------------- + * pd + 1 + */ + + mfi = (reg >> 10) & 0xf; + mfn = reg & 0x3ff; + mfd = (reg >> 16) & 0x3ff; + pd = (reg >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + + mfn_abs = mfn; + + /* + * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit + * 2's complements number + */ + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + mfn_abs = 0x400 - mfn; + + rate = parent_rate * 2; + rate /= pd + 1; + + ll = (unsigned long long)rate * mfn_abs; + + do_div(ll, mfd + 1); + + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + ll = -ll; + + ll = (rate * mfi) + ll; - return mxc_decode_pll(readl(pll->base), parent_rate); + return ll; } struct clk_ops clk_pllv1_ops = { diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c new file mode 100644 index 00000000000..f5e8be8e7f1 --- /dev/null +++ b/arch/arm/mach-imx/clk.c @@ -0,0 +1,3 @@ +#include <linux/spinlock.h> + +DEFINE_SPINLOCK(imx_ccm_lock); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 1bf64fe2523..5f2d8acca25 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -3,7 +3,8 @@ #include <linux/spinlock.h> #include <linux/clk-provider.h> -#include <mach/clock.h> + +extern spinlock_t imx_ccm_lock; struct clk *imx_clk_pllv1(const char *name, const char *parent, void __iomem *base); diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 436c5720fe6..04822932cdd 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -17,6 +17,10 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; #define imx27_add_fsl_usb2_udc(pdata) \ imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) +extern const struct imx_imx27_coda_data imx27_coda_data; +#define imx27_add_coda() \ + imx_add_imx27_coda(&imx27_coda_data) + extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; #define imx27_add_imx2_wdt() \ imx_add_imx2_wdt(&imx27_imx2_wdt_data) diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h deleted file mode 100644 index 77e0db96c44..00000000000 --- a/arch/arm/mach-imx/devices-imx53.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <mach/mx53.h> -#include <mach/devices-common.h> - -extern const struct imx_fec_data imx53_fec_data; -#define imx53_add_fec(pdata) \ - imx_add_fec(&imx53_fec_data, pdata) - -extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[]; -#define imx53_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata) - - -extern const struct imx_imx_i2c_data imx53_imx_i2c_data[]; -#define imx53_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata) - -extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[]; -#define imx53_add_sdhci_esdhc_imx(id, pdata) \ - imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata) - -extern const struct imx_spi_imx_data imx53_ecspi_data[]; -#define imx53_add_ecspi(id, pdata) \ - imx_add_spi_imx(&imx53_ecspi_data[id], pdata) - -extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; -#define imx53_add_imx2_wdt(id) \ - imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) - -extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; -#define imx53_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata) - -extern const struct imx_imx_keypad_data imx53_imx_keypad_data; -#define imx53_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx53_imx_keypad_data, pdata) - -extern const struct imx_pata_imx_data imx53_pata_imx_data; -#define imx53_add_pata_imx() \ - imx_add_pata_imx(&imx53_pata_imx_data) - -extern struct platform_device *__init imx53_add_ahci_imx(void); diff --git a/arch/arm/mach-imx/efika.h b/arch/arm/mach-imx/efika.h deleted file mode 100644 index 014aa985faa..00000000000 --- a/arch/arm/mach-imx/efika.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _EFIKA_H -#define _EFIKA_H - -#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16) -#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10) -#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9) - -void __init efika_board_common_init(void); - -#endif diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 05bb41d9972..412c583a24b 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/mxc_ehci.h> +#include <linux/platform_data/usb-ehci-mxc.h> #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c index fa69419eabd..cd6e1f81508 100644 --- a/arch/arm/mach-imx/ehci-imx27.c +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/mxc_ehci.h> +#include <linux/platform_data/usb-ehci-mxc.h> #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c index faad0f15ac7..9a880c78af3 100644 --- a/arch/arm/mach-imx/ehci-imx31.c +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/mxc_ehci.h> +#include <linux/platform_data/usb-ehci-mxc.h> #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 73574c30cf5..779e16eb65c 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/mxc_ehci.h> +#include <linux/platform_data/usb-ehci-mxc.h> #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index a6a4afb0ad6..cf8d00e5cce 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/mxc_ehci.h> +#include <linux/platform_data/usb-ehci-mxc.h> #define MXC_OTG_OFFSET 0 #define MXC_H1_OFFSET 0x200 diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index fd3177f9e79..98aef571b9f 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -348,4 +348,5 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index dfd2da87c2d..0b84666792f 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -306,4 +306,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void) platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 6e9dd12a696..c6532a007d4 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -315,4 +315,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void) platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c index 96a24b73dc2..8b0de30d7a3 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c @@ -228,4 +228,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void) gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info); imx_add_gpio_keys(&eukrea_mbimxsd51_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index f8f7437c83b..b07b778dc9a 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -15,11 +15,6 @@ #include <asm/cp15.h> #include <mach/common.h> -int platform_cpu_kill(unsigned int cpu) -{ - return 1; -} - static inline void cpu_enter_lowpower(void) { unsigned int v; @@ -47,7 +42,7 @@ static inline void cpu_enter_lowpower(void) * * Called with IRQs disabled */ -void platform_cpu_die(unsigned int cpu) +void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); @@ -56,12 +51,3 @@ void platform_cpu_die(unsigned int cpu) while (1) ; } - -int platform_cpu_disable(unsigned int cpu) -{ - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index d4067fe3635..f233b4bb234 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -13,7 +13,6 @@ #include <linux/irq.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/pinctrl/machine.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/common.h> @@ -44,27 +43,8 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static const struct of_device_id imx51_iomuxc_of_match[] __initconst = { - { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, }, - { /* sentinel */ } -}; - static void __init imx51_dt_init(void) { - struct device_node *node; - const struct of_device_id *of_id; - void (*func)(void); - - pinctrl_provide_dummies(); - - node = of_find_matching_node(NULL, imx51_iomuxc_of_match); - if (node) { - of_id = of_match_node(imx51_iomuxc_of_match, node); - func = of_id->data; - func(); - of_node_put(node); - } - of_platform_populate(NULL, of_default_bus_match_table, imx51_auxdata_lookup, NULL); } @@ -79,7 +59,6 @@ static struct sys_timer imx51_timer = { }; static const char *imx51_dt_board_compat[] __initdata = { - "fsl,imx51-babbage", "fsl,imx51", NULL }; diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 2c6ab3273f9..5985ed1b8c9 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | + (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index f264ddddd47..141756f00ae 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -32,13 +32,14 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/leds.h> -#include <linux/memblock.h> +#include <linux/platform_data/asoc-mx27vis.h> #include <media/soc_camera.h> #include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/system_info.h> +#include <asm/memblock.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx27.h> @@ -58,6 +59,11 @@ #define EXPBOARD_BIT1 (GPIO_PORTD + 27) #define EXPBOARD_BIT0 (GPIO_PORTD + 28) +#define AMP_GAIN_0 (GPIO_PORTF + 9) +#define AMP_GAIN_1 (GPIO_PORTF + 8) +#define AMP_MUTE_SDL (GPIO_PORTE + 5) +#define AMP_MUTE_SDR (GPIO_PORTF + 7) + static const int visstrim_m10_pins[] __initconst = { /* UART1 (console) */ PE12_PF_UART1_TXD, @@ -139,6 +145,11 @@ static const int visstrim_m10_pins[] __initconst = { EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + /* Audio AMP control */ + AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT, + AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT, }; static struct gpio visstrim_m10_version_gpios[] = { @@ -166,6 +177,26 @@ static const struct gpio visstrim_m10_gpios[] __initconst = { .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, .label = "usbotg_cs", }, + { + .gpio = AMP_GAIN_0, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-0", + }, + { + .gpio = AMP_GAIN_1, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-1", + }, + { + .gpio = AMP_MUTE_SDL, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdl", + }, + { + .gpio = AMP_MUTE_SDR, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdr", + }, }; /* Camera */ @@ -233,10 +264,8 @@ static void __init visstrim_camera_init(void) static void __init visstrim_reserve(void) { /* reserve 4 MiB for mx2-camera */ - mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE, + mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE, MX2_CAMERA_BUF_SIZE); - memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE); - memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE); } /* GPIOs used as events for applications */ @@ -405,6 +434,55 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = { .flags = IMX_SSI_DMA | IMX_SSI_SYN, }; +/* coda */ + +static void __init visstrim_coda_init(void) +{ + struct platform_device *pdev; + int dma; + + pdev = imx27_add_coda(); + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + +/* DMA deinterlace */ +static struct platform_device visstrim_deinterlace = { + .name = "m2m-deinterlace", + .id = 0, +}; + +static void __init visstrim_deinterlace_init(void) +{ + int ret = -ENOMEM; + struct platform_device *pdev = &visstrim_deinterlace; + int dma; + + ret = platform_device_register(pdev); + + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + + +/* Audio */ +static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { + .amp_gain0_gpio = AMP_GAIN_0, + .amp_gain1_gpio = AMP_GAIN_1, + .amp_mutel_gpio = AMP_MUTE_SDL, + .amp_muter_gpio = AMP_MUTE_SDR, +}; + static void __init visstrim_m10_revision(void) { int exp_version = 0; @@ -463,11 +541,14 @@ static void __init visstrim_m10_board_init(void) imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0); + imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, + sizeof(snd_mx27vis_pdata)); platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); + visstrim_deinterlace_init(); visstrim_camera_init(); + visstrim_coda_init(); } static void __init visstrim_m10_timer_init(void) diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/mach-imx53.c index 1b7a2fc3659..29711e95579 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -17,7 +17,6 @@ #include <linux/irq.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/pinctrl/machine.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/common.h> @@ -51,14 +50,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static const struct of_device_id imx53_iomuxc_of_match[] __initconst = { - { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, }, - { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, }, - { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, }, - { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, }, - { /* sentinel */ } -}; - static void __init imx53_qsb_init(void) { struct clk *clk; @@ -74,20 +65,6 @@ static void __init imx53_qsb_init(void) static void __init imx53_dt_init(void) { - struct device_node *node; - const struct of_device_id *of_id; - void (*func)(void); - - pinctrl_provide_dummies(); - - node = of_find_matching_node(NULL, imx53_iomuxc_of_match); - if (node) { - of_id = of_match_node(imx53_iomuxc_of_match, node); - func = of_id->data; - func(); - of_node_put(node); - } - if (of_machine_is_compatible("fsl,imx53-qsb")) imx53_qsb_init(); @@ -105,10 +82,6 @@ static struct sys_timer imx53_timer = { }; static const char *imx53_dt_board_compat[] __initdata = { - "fsl,imx53-ard", - "fsl,imx53-evk", - "fsl,imx53-qsb", - "fsl,imx53-smd", "fsl,imx53", NULL }; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 045b3f6a387..47c91f7185d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -22,10 +22,10 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/pinctrl/machine.h> #include <linux/phy.h> +#include <linux/regmap.h> #include <linux/micrel_phy.h> -#include <linux/mfd/anatop.h> +#include <linux/mfd/syscon.h> #include <asm/cpuidle.h> #include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> @@ -100,7 +100,6 @@ static void __init imx6q_sabrelite_cko1_setup(void) clk_set_parent(cko1_sel, ahb); rate = clk_round_rate(cko1, 16000000); clk_set_rate(cko1, rate); - clk_register_clkdev(cko1, NULL, "0-000a"); put_clk: if (!IS_ERR(cko1_sel)) clk_put(cko1_sel); @@ -120,20 +119,7 @@ static void __init imx6q_sabrelite_init(void) static void __init imx6q_usb_init(void) { - struct device_node *np; - struct platform_device *pdev = NULL; - struct anatop *adata = NULL; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); - if (np) - pdev = of_find_device_by_node(np); - if (pdev) - adata = platform_get_drvdata(pdev); - if (!adata) { - if (np) - of_node_put(np); - return; - } + struct regmap *anatop; #define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0 #define HW_ANADIG_USB2_CHRG_DETECT 0x00000210 @@ -141,30 +127,25 @@ static void __init imx6q_usb_init(void) #define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000 - /* - * The external charger detector needs to be disabled, - * or the signal at DP will be poor - */ - anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B - | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, - ~0); - anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B | - BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, - ~0); - - of_node_put(np); + anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); + if (!IS_ERR(anatop)) { + /* + * The external charger detector needs to be disabled, + * or the signal at DP will be poor + */ + regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B + | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); + regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B | + BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); + } else { + pr_warn("failed to find fsl,imx6q-anatop regmap\n"); + } } static void __init imx6q_init_machine(void) { - /* - * This should be removed when all imx6q boards have pinctrl - * states for devices defined in device tree. - */ - pinctrl_provide_dummies(); - if (of_machine_is_compatible("fsl,imx6q-sabrelite")) imx6q_sabrelite_init(); @@ -218,14 +199,12 @@ static struct sys_timer imx6q_timer = { }; static const char *imx6q_dt_compat[] __initdata = { - "fsl,imx6q-arm2", - "fsl,imx6q-sabrelite", - "fsl,imx6q-sabresd", "fsl,imx6q", NULL, }; DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)") + .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, .handle_irq = imx6q_handle_irq, diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 5d08533ab2c..0330078ff78 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,7 +36,6 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/clock.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx3.h> @@ -259,13 +258,13 @@ static void __init kzm_board_init(void) */ static struct map_desc kzm_io_desc[] __initdata = { { - .virtual = MX31_CS4_BASE_ADDR_VIRT, + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), .length = MX31_CS4_SIZE, .type = MT_DEVICE }, { - .virtual = MX31_CS5_BASE_ADDR_VIRT, + .virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), .length = MX31_CS5_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 58c24c1a7ab..05996f39005 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -158,6 +158,11 @@ static const int mx27pdk_pins[] __initconst = { PB21_PF_CSI_HSYNC, CSI_PWRDWN | GPIO_GPIO | GPIO_OUT, CSI_RESET | GPIO_GPIO | GPIO_OUT, + /* SSI4 */ + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD, + PC18_PF_SSI4_TXD, + PC19_PF_SSI4_CLK, }; static struct gpio mx27_3ds_camera_gpios[] = { @@ -329,13 +334,24 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }; /* MC13783 */ +static struct mc13xxx_codec_platform_data mx27_3ds_codec = { + .dac_ssi_port = MC13783_SSI1_PORT, + .adc_ssi_port = MC13783_SSI1_PORT, +}; + static struct mc13xxx_platform_data mc13783_pdata = { .regulators = { .regulators = mx27_3ds_regulators, .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), }, - .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | + MC13XXX_USE_CODEC, + .codec = &mx27_3ds_codec, +}; + +static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_NET, }; /* SPI */ @@ -512,6 +528,9 @@ static void __init mx27pdk_init(void) } imx27_add_mx2_camera(&mx27_3ds_cam_pdata); + imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } static void __init mx27pdk_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index d37f4809c55..e774b07f48d 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -540,7 +540,7 @@ static void __init mxc_init_audio(void) */ static struct map_desc mx31ads_io_desc[] __initdata = { { - .virtual = MX31_CS4_BASE_ADDR_VIRT, + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), .length = CS4_CS8900_MMIO_START, .type = MT_DEVICE diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index c8785b39eae..ef57cff5abf 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -207,7 +207,7 @@ static struct platform_device physmap_flash_device = { */ static struct map_desc mx31lite_io_desc[] __initdata = { { - .virtual = MX31_CS4_BASE_ADDR_VIRT, + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), .length = MX31_CS4_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index d46290b288e..459e754ef8c 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -47,7 +47,7 @@ #include <mach/hardware.h> #include <mach/iomux-mx3.h> #include <mach/ulpi.h> -#include <mach/ssi.h> +#include <linux/platform_data/asoc-imx-ssi.h> #include "devices-imx31.h" diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c deleted file mode 100644 index 8d09c0126ca..00000000000 --- a/arch/arm/mach-imx/mach-mx51_efikamx.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Copyright (C) 2010 Linaro Limited - * - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/mfd/mc13892.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/consumer.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - -#include <asm/setup.h> -#include <asm/system_info.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "devices-imx51.h" -#include "efika.h" - -#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16) -#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17) -#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11) - -#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13) -#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14) -#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15) - -#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31) - -/* board 1.1 doesn't have same reset gpio */ -#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2) -#define EFIKAMX_RESET IMX_GPIO_NR(1, 4) - -#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13) - -#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) - -/* the pci ids pin have pull up. they're driven low according to board id */ -#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) - -static iomux_v3_cfg_t mx51efikamx_pads[] = { - /* board id */ - MX51_PAD_PCBID0, - MX51_PAD_PCBID1, - MX51_PAD_PCBID2, - - /* leds */ - MX51_PAD_CSI1_D9__GPIO3_13, - MX51_PAD_CSI1_VSYNC__GPIO3_14, - MX51_PAD_CSI1_HSYNC__GPIO3_15, - - /* power key */ - MX51_PAD_PWRKEY, - - /* reset */ - MX51_PAD_DI1_PIN13__GPIO3_2, - MX51_PAD_GPIO1_4__GPIO1_4, - - /* power off */ - MX51_PAD_CSI2_VSYNC__GPIO4_13, -}; - -/* PCBID2 PCBID1 PCBID0 STATE - 1 1 1 ER1:rev1.1 - 1 1 0 ER2:rev1.2 - 1 0 1 ER3:rev1.3 - 1 0 0 ER4:rev1.4 -*/ -static void __init mx51_efikamx_board_id(void) -{ - int id; - - /* things are taking time to settle */ - msleep(150); - - gpio_request(EFIKAMX_PCBID0, "pcbid0"); - gpio_direction_input(EFIKAMX_PCBID0); - gpio_request(EFIKAMX_PCBID1, "pcbid1"); - gpio_direction_input(EFIKAMX_PCBID1); - gpio_request(EFIKAMX_PCBID2, "pcbid2"); - gpio_direction_input(EFIKAMX_PCBID2); - - id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0; - id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1; - id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2; - - switch (id) { - case 7: - system_rev = 0x11; - break; - case 6: - system_rev = 0x12; - break; - case 5: - system_rev = 0x13; - break; - case 4: - system_rev = 0x14; - break; - default: - system_rev = 0x10; - break; - } - - if ((system_rev == 0x10) - || (system_rev == 0x12) - || (system_rev == 0x14)) { - printk(KERN_WARNING - "EfikaMX: Unsupported board revision 1.%u!\n", - system_rev & 0xf); - } -} - -static struct gpio_led mx51_efikamx_leds[] __initdata = { - { - .name = "efikamx:green", - .default_trigger = "default-on", - .gpio = EFIKAMX_GREEN_LED, - }, - { - .name = "efikamx:red", - .default_trigger = "ide-disk", - .gpio = EFIKAMX_RED_LED, - }, - { - .name = "efikamx:blue", - .default_trigger = "mmc0", - .gpio = EFIKAMX_BLUE_LED, - }, -}; - -static const struct gpio_led_platform_data - mx51_efikamx_leds_data __initconst = { - .leds = mx51_efikamx_leds, - .num_leds = ARRAY_SIZE(mx51_efikamx_leds), -}; - -static struct esdhc_platform_data sd_pdata = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct gpio_keys_button mx51_efikamx_powerkey[] = { - { - .code = KEY_POWER, - .gpio = EFIKAMX_POWER_KEY, - .type = EV_PWR, - .desc = "Power Button (CM)", - .wakeup = 1, - .debounce_interval = 10, /* ms */ - }, -}; - -static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = { - .buttons = mx51_efikamx_powerkey, - .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey), -}; - -static void mx51_efikamx_restart(char mode, const char *cmd) -{ - if (system_rev == 0x11) - gpio_direction_output(EFIKAMX_RESET1_1, 0); - else - gpio_direction_output(EFIKAMX_RESET, 0); -} - -static struct regulator *pwgt1, *pwgt2, *coincell; - -static void mx51_efikamx_power_off(void) -{ - if (!IS_ERR(coincell)) - regulator_disable(coincell); - - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_disable(pwgt2); - regulator_disable(pwgt1); - } - gpio_direction_output(EFIKAMX_POWEROFF, 1); -} - -static int __init mx51_efikamx_power_init(void) -{ - pwgt1 = regulator_get(NULL, "pwgt1"); - pwgt2 = regulator_get(NULL, "pwgt2"); - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_enable(pwgt1); - regulator_enable(pwgt2); - } - gpio_request(EFIKAMX_POWEROFF, "poweroff"); - pm_power_off = mx51_efikamx_power_off; - - /* enable coincell charger. maybe need a small power driver ? */ - coincell = regulator_get(NULL, "coincell"); - if (!IS_ERR(coincell)) { - regulator_set_voltage(coincell, 3000000, 3000000); - regulator_enable(coincell); - } - - regulator_has_full_constraints(); - - return 0; -} - -static void __init mx51_efikamx_init_late(void) -{ - imx51_init_late(); - mx51_efikamx_power_init(); -} - -static void __init mx51_efikamx_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, - ARRAY_SIZE(mx51efikamx_pads)); - efika_board_common_init(); - - mx51_efikamx_board_id(); - - /* on < 1.2 boards both SD controllers are used */ - if (system_rev < 0x12) { - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, &sd_pdata); - mx51_efikamx_leds[2].default_trigger = "mmc1"; - } else - imx51_add_sdhci_esdhc_imx(0, &sd_pdata); - - gpio_led_register_device(-1, &mx51_efikamx_leds_data); - imx_add_gpio_keys(&mx51_efikamx_powerkey_data); - - if (system_rev == 0x11) { - gpio_request(EFIKAMX_RESET1_1, "reset"); - gpio_direction_output(EFIKAMX_RESET1_1, 1); - } else { - gpio_request(EFIKAMX_RESET, "reset"); - gpio_direction_output(EFIKAMX_RESET, 1); - } - - /* - * enable wifi by default only on mx - * sb and mx have same wlan pin but the value to enable it are - * different :/ - */ - gpio_request(EFIKA_WLAN_EN, "wlan_en"); - gpio_direction_output(EFIKA_WLAN_EN, 0); - msleep(10); - - gpio_request(EFIKA_WLAN_RESET, "wlan_rst"); - gpio_direction_output(EFIKA_WLAN_RESET, 0); - msleep(10); - gpio_set_value(EFIKA_WLAN_RESET, 1); -} - -static void __init mx51_efikamx_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 24576000); -} - -static struct sys_timer mx51_efikamx_timer = { - .init = mx51_efikamx_timer_init, -}; - -MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)") - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .timer = &mx51_efikamx_timer, - .init_machine = mx51_efikamx_init, - .init_late = mx51_efikamx_init_late, - .restart = mx51_efikamx_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c deleted file mode 100644 index fdbd181b97e..00000000000 --- a/arch/arm/mach-imx/mach-mx51_efikasb.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org> - * - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/mfd/mc13892.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/consumer.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <mach/ulpi.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - -#include <asm/setup.h> -#include <asm/system_info.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "devices-imx51.h" -#include "efika.h" - -#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20) -#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3) -#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25) -#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28) -#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29) -#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31) -#define EFIKASB_LID IMX_GPIO_NR(3, 14) -#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13) -#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1) - -#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) -#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL) - -static iomux_v3_cfg_t mx51efikasb_pads[] = { - /* USB HOST2 */ - MX51_PAD_EIM_D16__USBH2_DATA0, - MX51_PAD_EIM_D17__USBH2_DATA1, - MX51_PAD_EIM_D18__USBH2_DATA2, - MX51_PAD_EIM_D19__USBH2_DATA3, - MX51_PAD_EIM_D20__USBH2_DATA4, - MX51_PAD_EIM_D21__USBH2_DATA5, - MX51_PAD_EIM_D22__USBH2_DATA6, - MX51_PAD_EIM_D23__USBH2_DATA7, - MX51_PAD_EIM_A24__USBH2_CLK, - MX51_PAD_EIM_A25__USBH2_DIR, - MX51_PAD_EIM_A26__USBH2_STP, - MX51_PAD_EIM_A27__USBH2_NXT, - - /* leds */ - MX51_PAD_EIM_CS0__GPIO2_25, - MX51_PAD_GPIO1_3__GPIO1_3, - - /* pcb id */ - MX51_PAD_EIM_CS3__GPIO2_28, - MX51_PAD_EIM_CS4__GPIO2_29, - - /* lid */ - MX51_PAD_CSI1_VSYNC__GPIO3_14, - - /* power key*/ - MX51_PAD_PWRKEY, - - /* wifi/bt button */ - MX51_PAD_DI1_PIN12__GPIO3_1, - - /* power off */ - MX51_PAD_CSI2_VSYNC__GPIO4_13, - - /* wdog reset */ - MX51_PAD_GPIO1_4__WDOG1_WDOG_B, - - /* BT */ - MX51_PAD_EIM_A17__GPIO2_11, - - MX51_PAD_SD1_CD, -}; - -static int initialize_usbh2_port(struct platform_device *pdev) -{ - iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP; - iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20; - - mxc_iomux_v3_setup_pad(usbh2gpio); - gpio_request(EFIKASB_USBH2_STP, "usbh2_stp"); - gpio_direction_output(EFIKASB_USBH2_STP, 0); - msleep(1); - gpio_set_value(EFIKASB_USBH2_STP, 1); - msleep(1); - - gpio_free(EFIKASB_USBH2_STP); - mxc_iomux_v3_setup_pad(usbh2stp); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); -} - -static struct mxc_usbh_platform_data usbh2_config __initdata = { - .init = initialize_usbh2_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void __init mx51_efikasb_usb(void) -{ - usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); - if (usbh2_config.otg) - imx51_add_mxc_ehci_hs(2, &usbh2_config); -} - -static const struct gpio_led mx51_efikasb_leds[] __initconst = { - { - .name = "efikasb:green", - .default_trigger = "default-on", - .gpio = EFIKASB_GREEN_LED, - .active_low = 1, - }, - { - .name = "efikasb:white", - .default_trigger = "caps", - .gpio = EFIKASB_WHITE_LED, - }, -}; - -static const struct gpio_led_platform_data - mx51_efikasb_leds_data __initconst = { - .leds = mx51_efikasb_leds, - .num_leds = ARRAY_SIZE(mx51_efikasb_leds), -}; - -static struct gpio_keys_button mx51_efikasb_keys[] = { - { - .code = KEY_POWER, - .gpio = EFIKASB_PWRKEY, - .type = EV_KEY, - .desc = "Power Button", - .wakeup = 1, - .active_low = 1, - }, - { - .code = SW_LID, - .gpio = EFIKASB_LID, - .type = EV_SW, - .desc = "Lid Switch", - .active_low = 1, - }, - { - .code = KEY_RFKILL, - .gpio = EFIKASB_RFKILL, - .type = EV_KEY, - .desc = "rfkill", - .active_low = 1, - }, -}; - -static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = { - .buttons = mx51_efikasb_keys, - .nbuttons = ARRAY_SIZE(mx51_efikasb_keys), -}; - -static struct esdhc_platform_data sd0_pdata = { -#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27) - .cd_gpio = EFIKASB_SD1_CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct esdhc_platform_data sd1_pdata = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct regulator *pwgt1, *pwgt2; - -static void mx51_efikasb_power_off(void) -{ - gpio_set_value(EFIKA_USB_PHY_RESET, 0); - - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_disable(pwgt2); - regulator_disable(pwgt1); - } - gpio_direction_output(EFIKASB_POWEROFF, 1); -} - -static int __init mx51_efikasb_power_init(void) -{ - pwgt1 = regulator_get(NULL, "pwgt1"); - pwgt2 = regulator_get(NULL, "pwgt2"); - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_enable(pwgt1); - regulator_enable(pwgt2); - } - gpio_request(EFIKASB_POWEROFF, "poweroff"); - pm_power_off = mx51_efikasb_power_off; - - regulator_has_full_constraints(); - - return 0; -} - -static void __init mx51_efikasb_init_late(void) -{ - imx51_init_late(); - mx51_efikasb_power_init(); -} - -/* 01 R1.3 board - 10 R2.0 board */ -static void __init mx51_efikasb_board_id(void) -{ - int id; - - gpio_request(EFIKASB_PCBID0, "pcb id0"); - gpio_direction_input(EFIKASB_PCBID0); - gpio_request(EFIKASB_PCBID1, "pcb id1"); - gpio_direction_input(EFIKASB_PCBID1); - - id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0; - id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1; - - switch (id) { - default: - break; - case 1: - system_rev = 0x13; - break; - case 2: - system_rev = 0x20; - break; - } -} - -static void __init efikasb_board_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, - ARRAY_SIZE(mx51efikasb_pads)); - efika_board_common_init(); - - mx51_efikasb_board_id(); - mx51_efikasb_usb(); - imx51_add_sdhci_esdhc_imx(0, &sd0_pdata); - imx51_add_sdhci_esdhc_imx(1, &sd1_pdata); - - gpio_led_register_device(-1, &mx51_efikasb_leds_data); - imx_add_gpio_keys(&mx51_efikasb_keys_data); -} - -static void __init mx51_efikasb_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 24576000); -} - -static struct sys_timer mx51_efikasb_timer = { - .init = mx51_efikasb_timer_init, -}; - -MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)") - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_machine = efikasb_board_init, - .init_late = mx51_efikasb_init_late, - .timer = &mx51_efikasb_timer, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c deleted file mode 100644 index 6c28e65f424..00000000000 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/smsc911x.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx53.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "devices-imx53.h" - -#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) -#define ARD_SD1_CD IMX_GPIO_NR(1, 1) -#define ARD_SD1_WP IMX_GPIO_NR(1, 9) -#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3) -#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0) -#define ARD_HOME IMX_GPIO_NR(5, 10) -#define ARD_BACK IMX_GPIO_NR(5, 11) -#define ARD_PROG IMX_GPIO_NR(5, 12) -#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13) - -static iomux_v3_cfg_t mx53_ard_pads[] = { - /* UART1 */ - MX53_PAD_PATA_DIOW__UART1_TXD_MUX, - MX53_PAD_PATA_DMACK__UART1_RXD_MUX, - /* WEIM for CS1 */ - MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */ - MX53_PAD_EIM_D16__EMI_WEIM_D_16, - MX53_PAD_EIM_D17__EMI_WEIM_D_17, - MX53_PAD_EIM_D18__EMI_WEIM_D_18, - MX53_PAD_EIM_D19__EMI_WEIM_D_19, - MX53_PAD_EIM_D20__EMI_WEIM_D_20, - MX53_PAD_EIM_D21__EMI_WEIM_D_21, - MX53_PAD_EIM_D22__EMI_WEIM_D_22, - MX53_PAD_EIM_D23__EMI_WEIM_D_23, - MX53_PAD_EIM_D24__EMI_WEIM_D_24, - MX53_PAD_EIM_D25__EMI_WEIM_D_25, - MX53_PAD_EIM_D26__EMI_WEIM_D_26, - MX53_PAD_EIM_D27__EMI_WEIM_D_27, - MX53_PAD_EIM_D28__EMI_WEIM_D_28, - MX53_PAD_EIM_D29__EMI_WEIM_D_29, - MX53_PAD_EIM_D30__EMI_WEIM_D_30, - MX53_PAD_EIM_D31__EMI_WEIM_D_31, - MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, - MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, - MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, - MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, - MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, - MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, - MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, - MX53_PAD_EIM_OE__EMI_WEIM_OE, - MX53_PAD_EIM_RW__EMI_WEIM_RW, - MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, - /* SDHC1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - MX53_PAD_PATA_DATA8__ESDHC1_DAT4, - MX53_PAD_PATA_DATA9__ESDHC1_DAT5, - MX53_PAD_PATA_DATA10__ESDHC1_DAT6, - MX53_PAD_PATA_DATA11__ESDHC1_DAT7, - MX53_PAD_GPIO_1__GPIO1_1, - MX53_PAD_GPIO_9__GPIO1_9, - /* I2C2 */ - MX53_PAD_EIM_EB2__I2C2_SCL, - MX53_PAD_KEY_ROW3__I2C2_SDA, - /* I2C3 */ - MX53_PAD_GPIO_3__I2C3_SCL, - MX53_PAD_GPIO_16__I2C3_SDA, - /* GPIO */ - MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */ - MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */ - MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */ - MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */ - MX53_PAD_GPIO_10__GPIO4_0, /* vol down */ -}; - -#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ -{ \ - .gpio = gpio_num, \ - .type = EV_KEY, \ - .code = ev_code, \ - .active_low = act_low, \ - .desc = "btn " descr, \ - .wakeup = wake, \ -} - -static struct gpio_keys_button ard_buttons[] = { - GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0), - GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0), - GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0), - GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0), - GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0), -}; - -static const struct gpio_keys_platform_data ard_button_data __initconst = { - .buttons = ard_buttons, - .nbuttons = ARRAY_SIZE(ard_buttons), -}; - -static struct resource ard_smsc911x_resources[] = { - { - .start = MX53_CS1_64MB_BASE_ADDR, - .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, - { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ, - }, -}; - -struct smsc911x_platform_config ard_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT, -}; - -static struct platform_device ard_smsc_lan9220_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(ard_smsc911x_resources), - .resource = ard_smsc911x_resources, - .dev = { - .platform_data = &ard_smsc911x_config, - }, -}; - -static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = { - .cd_gpio = ARD_SD1_CD, - .wp_gpio = ARD_SD1_WP, -}; - -static struct imxi2c_platform_data mx53_ard_i2c2_data = { - .bitrate = 50000, -}; - -static struct imxi2c_platform_data mx53_ard_i2c3_data = { - .bitrate = 400000, -}; - -static void __init mx53_ard_io_init(void) -{ - gpio_request(ARD_ETHERNET_INT_B, "eth-int-b"); - gpio_direction_input(ARD_ETHERNET_INT_B); - - gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst"); - gpio_direction_output(ARD_I2CPORTEXP_B, 1); -} - -/* Config CS1 settings for ethernet controller */ -static int weim_cs_config(void) -{ - u32 reg; - void __iomem *weim_base, *iomuxc_base; - - weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K); - if (!weim_base) - return -ENOMEM; - - iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); - if (!iomuxc_base) { - iounmap(weim_base); - return -ENOMEM; - } - - /* CS1 timings for LAN9220 */ - writel(0x20001, (weim_base + 0x18)); - writel(0x0, (weim_base + 0x1C)); - writel(0x16000202, (weim_base + 0x20)); - writel(0x00000002, (weim_base + 0x24)); - writel(0x16002082, (weim_base + 0x28)); - writel(0x00000000, (weim_base + 0x2C)); - writel(0x00000000, (weim_base + 0x90)); - - /* specify 64 MB on CS1 and CS0 on GPR1 */ - reg = readl(iomuxc_base + 0x4); - reg &= ~0x3F; - reg |= 0x1B; - writel(reg, (iomuxc_base + 0x4)); - - iounmap(iomuxc_base); - iounmap(weim_base); - - return 0; -} - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -void __init imx53_ard_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, - ARRAY_SIZE(mx53_ard_pads)); - weim_cs_config(); -} - -static struct platform_device *devices[] __initdata = { - &ard_smsc_lan9220_device, -}; - -static void __init mx53_ard_board_init(void) -{ - imx53_soc_init(); - imx53_add_imx_uart(0, NULL); - - imx53_ard_common_init(); - mx53_ard_io_init(); - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B); - ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); - imx53_add_imx2_wdt(0); - imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); - imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); - imx_add_gpio_keys(&ard_button_data); - imx53_add_ahci_imx(); -} - -static void __init mx53_ard_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_ard_timer = { - .init = mx53_ard_timer_init, -}; - -MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_ard_timer, - .init_machine = mx53_ard_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c deleted file mode 100644 index 09fe2197b49..00000000000 --- a/arch/arm/mach-imx/mach-mx53_evk.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org> - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <mach/iomux-mx53.h> - -#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) -#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) -#define MX53EVK_LED IMX_GPIO_NR(7, 7) - -#include "devices-imx53.h" - -static iomux_v3_cfg_t mx53_evk_pads[] = { - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - MX53_PAD_PATA_DIOR__UART2_RTS, - MX53_PAD_PATA_INTRQ__UART2_CTS, - - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - - MX53_PAD_EIM_D16__ECSPI1_SCLK, - MX53_PAD_EIM_D17__ECSPI1_MISO, - MX53_PAD_EIM_D18__ECSPI1_MOSI, - - /* ecspi chip select lines */ - MX53_PAD_EIM_EB2__GPIO2_30, - MX53_PAD_EIM_D19__GPIO3_19, - /* LED */ - MX53_PAD_PATA_DA_1__GPIO7_7, -}; - -static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct gpio_led mx53evk_leds[] __initconst = { - { - .name = "green", - .default_trigger = "heartbeat", - .gpio = MX53EVK_LED, - }, -}; - -static const struct gpio_led_platform_data mx53evk_leds_data __initconst = { - .leds = mx53evk_leds, - .num_leds = ARRAY_SIZE(mx53evk_leds), -}; - -static inline void mx53_evk_init_uart(void) -{ - imx53_add_imx_uart(0, NULL); - imx53_add_imx_uart(1, &mx53_evk_uart_pdata); - imx53_add_imx_uart(2, NULL); -} - -static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = { - .bitrate = 100000, -}; - -static inline void mx53_evk_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW, - "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - msleep(1); - gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static struct spi_board_info mx53_evk_spi_board_info[] __initdata = { - { - .modalias = "mtd_dataflash", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - .platform_data = NULL, - }, -}; - -static int mx53_evk_spi_cs[] = { - EVK_ECSPI1_CS0, - EVK_ECSPI1_CS1, -}; - -static const struct spi_imx_master mx53_evk_spi_data __initconst = { - .chipselect = mx53_evk_spi_cs, - .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs), -}; - -void __init imx53_evk_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, - ARRAY_SIZE(mx53_evk_pads)); -} - -static void __init mx53_evk_board_init(void) -{ - imx53_soc_init(); - imx53_evk_common_init(); - - mx53_evk_init_uart(); - mx53_evk_fec_reset(); - imx53_add_fec(&mx53_evk_fec_pdata); - - imx53_add_imx_i2c(0, &mx53_evk_i2c_data); - imx53_add_imx_i2c(1, &mx53_evk_i2c_data); - - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(1, NULL); - - spi_register_board_info(mx53_evk_spi_board_info, - ARRAY_SIZE(mx53_evk_spi_board_info)); - imx53_add_ecspi(0, &mx53_evk_spi_data); - imx53_add_imx2_wdt(0); - gpio_led_register_device(-1, &mx53evk_leds_data); -} - -static void __init mx53_evk_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_evk_timer = { - .init = mx53_evk_timer_init, -}; - -MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_evk_timer, - .init_machine = mx53_evk_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c deleted file mode 100644 index 8abe23c1d3c..00000000000 --- a/arch/arm/mach-imx/mach-mx53_loco.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/i2c.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx53.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "devices-imx53.h" - -#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) -#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14) -#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) -#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define LOCO_LED IMX_GPIO_NR(7, 7) -#define LOCO_SD3_CD IMX_GPIO_NR(3, 11) -#define LOCO_SD3_WP IMX_GPIO_NR(3, 12) -#define LOCO_SD1_CD IMX_GPIO_NR(3, 13) -#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14) - -static iomux_v3_cfg_t mx53_loco_pads[] = { - /* FEC */ - MX53_PAD_FEC_MDC__FEC_MDC, - MX53_PAD_FEC_MDIO__FEC_MDIO, - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - MX53_PAD_FEC_RX_ER__FEC_RX_ER, - MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - MX53_PAD_FEC_RXD1__FEC_RDATA_1, - MX53_PAD_FEC_RXD0__FEC_RDATA_0, - MX53_PAD_FEC_TX_EN__FEC_TX_EN, - MX53_PAD_FEC_TXD1__FEC_TDATA_1, - MX53_PAD_FEC_TXD0__FEC_TDATA_0, - /* FEC_nRST */ - MX53_PAD_PATA_DA_0__GPIO7_6, - /* FEC_nINT */ - MX53_PAD_PATA_DATA4__GPIO2_4, - /* AUDMUX5 */ - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC, - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD, - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS, - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */ - /* I2C2 */ - MX53_PAD_KEY_COL3__I2C2_SCL, - MX53_PAD_KEY_ROW3__I2C2_SDA, - /* SD1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD1_CD */ - MX53_PAD_EIM_DA13__GPIO3_13, - /* SD3 */ - MX53_PAD_PATA_DATA8__ESDHC3_DAT0, - MX53_PAD_PATA_DATA9__ESDHC3_DAT1, - MX53_PAD_PATA_DATA10__ESDHC3_DAT2, - MX53_PAD_PATA_DATA11__ESDHC3_DAT3, - MX53_PAD_PATA_DATA0__ESDHC3_DAT4, - MX53_PAD_PATA_DATA1__ESDHC3_DAT5, - MX53_PAD_PATA_DATA2__ESDHC3_DAT6, - MX53_PAD_PATA_DATA3__ESDHC3_DAT7, - MX53_PAD_PATA_IORDY__ESDHC3_CLK, - MX53_PAD_PATA_RESET_B__ESDHC3_CMD, - /* SD3_CD */ - MX53_PAD_EIM_DA11__GPIO3_11, - /* SD3_WP */ - MX53_PAD_EIM_DA12__GPIO3_12, - /* VGA */ - MX53_PAD_EIM_OE__IPU_DI1_PIN7, - MX53_PAD_EIM_RW__IPU_DI1_PIN8, - /* DISPLB */ - MX53_PAD_EIM_D20__IPU_SER_DISP0_CS, - MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK, - MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN, - MX53_PAD_EIM_D23__IPU_DI0_D0_CS, - /* DISP0_POWER_EN */ - MX53_PAD_EIM_D24__GPIO3_24, - /* DISP0 DET INT */ - MX53_PAD_EIM_D31__GPIO3_31, - /* LVDS */ - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3, - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK, - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2, - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1, - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0, - MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3, - MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2, - MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK, - MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1, - MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - /* UART1 */ - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - /* CSI0 */ - MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12, - MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13, - MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14, - MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15, - MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16, - MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17, - MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18, - MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19, - MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC, - MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC, - MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK, - /* DISPLAY */ - MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK, - MX53_PAD_DI0_PIN15__IPU_DI0_PIN15, - MX53_PAD_DI0_PIN2__IPU_DI0_PIN2, - MX53_PAD_DI0_PIN3__IPU_DI0_PIN3, - MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0, - MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1, - MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2, - MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3, - MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4, - MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5, - MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6, - MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7, - MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8, - MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9, - MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10, - MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11, - MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12, - MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13, - MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14, - MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15, - MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16, - MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17, - MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18, - MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19, - MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20, - MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21, - MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22, - MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23, - /* Audio CLK*/ - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK, - /* PWM */ - MX53_PAD_GPIO_1__PWM2_PWMO, - /* SPDIF */ - MX53_PAD_GPIO_7__SPDIF_PLOCK, - MX53_PAD_GPIO_17__SPDIF_OUT1, - /* GPIO */ - MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */ - MX53_PAD_PATA_DA_2__GPIO7_8, - MX53_PAD_PATA_DATA5__GPIO2_5, - MX53_PAD_PATA_DATA6__GPIO2_6, - MX53_PAD_PATA_DATA14__GPIO2_14, - MX53_PAD_PATA_DATA15__GPIO2_15, - MX53_PAD_PATA_INTRQ__GPIO7_2, - MX53_PAD_EIM_WAIT__GPIO5_0, - MX53_PAD_NANDF_WP_B__GPIO6_9, - MX53_PAD_NANDF_RB0__GPIO6_10, - MX53_PAD_NANDF_CS1__GPIO6_14, - MX53_PAD_NANDF_CS2__GPIO6_15, - MX53_PAD_NANDF_CS3__GPIO6_16, - MX53_PAD_GPIO_5__GPIO1_5, - MX53_PAD_GPIO_16__GPIO7_11, - MX53_PAD_GPIO_8__GPIO1_8, -}; - -#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ -{ \ - .gpio = gpio_num, \ - .type = EV_KEY, \ - .code = ev_code, \ - .active_low = act_low, \ - .desc = "btn " descr, \ - .wakeup = wake, \ -} - -static struct gpio_keys_button loco_buttons[] = { - GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0), - GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0), - GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0), -}; - -static const struct gpio_keys_platform_data loco_button_data __initconst = { - .buttons = loco_buttons, - .nbuttons = ARRAY_SIZE(loco_buttons), -}; - -static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = { - .cd_gpio = LOCO_SD1_CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_NONE, -}; - -static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = { - .cd_gpio = LOCO_SD3_CD, - .wp_gpio = LOCO_SD3_WP, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_GPIO, -}; - -static inline void mx53_loco_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - gpio_direction_output(LOCO_FEC_PHY_RST, 0); - msleep(1); - gpio_set_value(LOCO_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_loco_fec_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { - .bitrate = 100000, -}; - -static const struct gpio_led mx53loco_leds[] __initconst = { - { - .name = "green", - .default_trigger = "heartbeat", - .gpio = LOCO_LED, - }, -}; - -static const struct gpio_led_platform_data mx53loco_leds_data __initconst = { - .leds = mx53loco_leds, - .num_leds = ARRAY_SIZE(mx53loco_leds), -}; - -void __init imx53_qsb_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, - ARRAY_SIZE(mx53_loco_pads)); -} - -static struct i2c_board_info mx53loco_i2c_devices[] = { - { - I2C_BOARD_INFO("mma8450", 0x1C), - }, -}; - -static void __init mx53_loco_board_init(void) -{ - int ret; - imx53_soc_init(); - imx53_qsb_common_init(); - - imx53_add_imx_uart(0, NULL); - mx53_loco_fec_reset(); - imx53_add_fec(&mx53_loco_fec_data); - imx53_add_imx2_wdt(0); - - ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en"); - if (ret) - pr_err("Cannot request ACCEL_EN pin: %d\n", ret); - - i2c_register_board_info(0, mx53loco_i2c_devices, - ARRAY_SIZE(mx53loco_i2c_devices)); - imx53_add_imx_i2c(0, &mx53_loco_i2c_data); - imx53_add_imx_i2c(1, &mx53_loco_i2c_data); - imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data); - imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data); - imx_add_gpio_keys(&loco_button_data); - gpio_led_register_device(-1, &mx53loco_leds_data); - imx53_add_ahci_imx(); -} - -static void __init mx53_loco_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 0, 0); -} - -static struct sys_timer mx53_loco_timer = { - .init = mx53_loco_timer_init, -}; - -MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_loco_timer, - .init_machine = mx53_loco_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c deleted file mode 100644 index b15d6a6d3b6..00000000000 --- a/arch/arm/mach-imx/mach-mx53_smd.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/gpio.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx53.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "devices-imx53.h" - -#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3) - -static iomux_v3_cfg_t mx53_smd_pads[] = { - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - MX53_PAD_PATA_DA_1__UART3_CTS, - MX53_PAD_PATA_DA_2__UART3_RTS, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - /* SD1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD2 */ - MX53_PAD_SD2_CMD__ESDHC2_CMD, - MX53_PAD_SD2_CLK__ESDHC2_CLK, - MX53_PAD_SD2_DATA0__ESDHC2_DAT0, - MX53_PAD_SD2_DATA1__ESDHC2_DAT1, - MX53_PAD_SD2_DATA2__ESDHC2_DAT2, - MX53_PAD_SD2_DATA3__ESDHC2_DAT3, - /* SD3 */ - MX53_PAD_PATA_DATA8__ESDHC3_DAT0, - MX53_PAD_PATA_DATA9__ESDHC3_DAT1, - MX53_PAD_PATA_DATA10__ESDHC3_DAT2, - MX53_PAD_PATA_DATA11__ESDHC3_DAT3, - MX53_PAD_PATA_DATA0__ESDHC3_DAT4, - MX53_PAD_PATA_DATA1__ESDHC3_DAT5, - MX53_PAD_PATA_DATA2__ESDHC3_DAT6, - MX53_PAD_PATA_DATA3__ESDHC3_DAT7, - MX53_PAD_PATA_IORDY__ESDHC3_CLK, - MX53_PAD_PATA_RESET_B__ESDHC3_CMD, -}; - -static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static inline void mx53_smd_init_uart(void) -{ - imx53_add_imx_uart(0, NULL); - imx53_add_imx_uart(1, NULL); - imx53_add_imx_uart(2, &mx53_smd_uart_data); -} - -static inline void mx53_smd_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - gpio_direction_output(SMD_FEC_PHY_RST, 0); - msleep(1); - gpio_set_value(SMD_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_smd_fec_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { - .bitrate = 100000, -}; - -static inline void mx53_smd_ahci_pwr_on(void) -{ - int ret; - - /* Enable SATA PWR */ - ret = gpio_request_one(MX53_SMD_SATA_PWR_EN, - GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr"); - if (ret) { - pr_err("failed to enable SATA_PWR_EN: %d\n", ret); - return; - } -} - -void __init imx53_smd_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, - ARRAY_SIZE(mx53_smd_pads)); -} - -static void __init mx53_smd_board_init(void) -{ - imx53_soc_init(); - imx53_smd_common_init(); - - mx53_smd_init_uart(); - mx53_smd_fec_reset(); - imx53_add_fec(&mx53_smd_fec_data); - imx53_add_imx2_wdt(0); - imx53_add_imx_i2c(0, &mx53_smd_i2c_data); - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(1, NULL); - imx53_add_sdhci_esdhc_imx(2, NULL); - mx53_smd_ahci_pwr_on(); - imx53_add_ahci_imx(); -} - -static void __init mx53_smd_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_smd_timer = { - .init = mx53_smd_timer_init, -}; - -MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_smd_timer, - .init_machine = mx53_smd_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 52d8f534be1..acb0aadb425 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -128,25 +128,6 @@ static struct sdma_platform_data imx51_sdma_pdata __initdata = { .script_addrs = &imx51_sdma_script, }; -static struct sdma_script_start_addrs imx53_sdma_script __initdata = { - .ap_2_ap_addr = 642, - .app_2_mcu_addr = 683, - .mcu_2_app_addr = 747, - .uart_2_mcu_addr = 817, - .shp_2_mcu_addr = 891, - .mcu_2_shp_addr = 960, - .uartsh_2_mcu_addr = 1032, - .spdif_2_mcu_addr = 1100, - .mcu_2_spdif_addr = 1134, - .firi_2_mcu_addr = 1193, - .mcu_2_firi_addr = 1290, -}; - -static struct sdma_platform_data imx53_sdma_pdata __initdata = { - .fw_name = "sdma-imx53.bin", - .script_addrs = &imx53_sdma_script, -}; - static const struct resource imx50_audmux_res[] __initconst = { DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K), }; @@ -155,10 +136,6 @@ static const struct resource imx51_audmux_res[] __initconst = { DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), }; -static const struct resource imx53_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K), -}; - void __init imx50_soc_init(void) { /* i.mx50 has the i.mx35 type gpio */ @@ -196,30 +173,6 @@ void __init imx51_soc_init(void) ARRAY_SIZE(imx51_audmux_res)); } -void __init imx53_soc_init(void) -{ - /* i.mx53 has the i.mx35 type gpio */ - mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); - mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); - mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); - mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); - mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); - mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); - mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); - - pinctrl_provide_dummies(); - /* i.mx53 has the i.mx35 type sdma */ - imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); - - /* Setup AIPS registers */ - imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR)); - imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR)); - - /* i.mx53 has the i.mx31 type audmux */ - platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res, - ARRAY_SIZE(imx53_audmux_res)); -} - void __init imx51_init_late(void) { mx51_neon_fixup(); diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c index b09ee12a4ff..fb38436ca67 100644 --- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c +++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c @@ -11,7 +11,7 @@ #include <linux/platform_device.h> #include <linux/module.h> -#include <mach/mx1_camera.h> +#include <linux/platform_data/camera-mx1.h> /* IMX camera FIQ handler */ EXPORT_SYMBOL(mx1_camera_sof_fiq_start); diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c deleted file mode 100644 index ee870c49bc6..00000000000 --- a/arch/arm/mach-imx/mx51_efika.c +++ /dev/null @@ -1,633 +0,0 @@ -/* - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/mfd/mc13892.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/consumer.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <mach/ulpi.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "devices-imx51.h" -#include "efika.h" -#include "cpu_op-mx51.h" - -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 - -#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5) -#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27) - -#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) -#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) - -#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) - -static iomux_v3_cfg_t mx51efika_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - - /* SD/MMC WP/CD */ - MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_GPIO1_1__SD1_WP, - MX51_PAD_GPIO1_7__SD2_WP, - MX51_PAD_GPIO1_8__SD2_CD, - - /* spi */ - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - MX51_PAD_CSPI1_RDY__ECSPI1_RDY, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_GPIO1_6__GPIO1_6, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - - /* USB HUB RESET */ - MX51_PAD_GPIO1_5__GPIO1_5, - - /* WLAN */ - MX51_PAD_EIM_A22__GPIO2_16, - MX51_PAD_EIM_A16__GPIO2_10, - - /* USB PHY RESET */ - MX51_PAD_EIM_D27__GPIO2_9, -}; - -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* This function is board specific as the bit mask for the plldiv will also - * be different for other Freescale SoCs, thus a common bitmask is not - * possible and cannot get place in /plat-mxc/ehci.c. - */ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; - iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27; - u32 v; - void __iomem *usb_base; - void __iomem *socregs_base; - - mxc_iomux_v3_setup_pad(usbh1gpio); - gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp"); - gpio_direction_output(EFIKAMX_USBH1_STP, 0); - msleep(1); - gpio_set_value(EFIKAMX_USBH1_STP, 1); - msleep(1); - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); - - /* The clock for the USBH1 ULPI port will come externally */ - /* from the PHY. */ - v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, - socregs_base + MX51_USB_CTRL_1_OFFSET); - - iounmap(usb_base); - - gpio_free(EFIKAMX_USBH1_STP); - mxc_iomux_v3_setup_pad(usbh1stp); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); -} - -static struct mxc_usbh_platform_data usbh1_config __initdata = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void mx51_efika_hubreset(void) -{ - gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst"); - gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1); - msleep(1); - gpio_set_value(EFIKAMX_USB_HUB_RESET, 0); - msleep(1); - gpio_set_value(EFIKAMX_USB_HUB_RESET, 1); -} - -static void __init mx51_efika_usb(void) -{ - mx51_efika_hubreset(); - - /* pulling it low, means no USB at all... */ - gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset"); - gpio_direction_output(EFIKA_USB_PHY_RESET, 0); - msleep(1); - gpio_set_value(EFIKA_USB_PHY_RESET, 1); - - usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); - - imx51_add_mxc_ehci_otg(&dr_utmi_config); - if (usbh1_config.otg) - imx51_add_mxc_ehci_hs(1, &usbh1_config); -} - -static struct mtd_partition mx51_efika_spi_nor_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - }, -}; - -static struct flash_platform_data mx51_efika_spi_flash_data = { - .name = "spi_flash", - .parts = mx51_efika_spi_nor_partitions, - .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions), - .type = "sst25vf032b", -}; - -static struct regulator_consumer_supply sw1_consumers[] = { - { - .supply = "cpu_vcc", - } -}; - -static struct regulator_consumer_supply vdig_consumers[] = { - /* sgtl5000 */ - REGULATOR_SUPPLY("VDDA", "1-000a"), - REGULATOR_SUPPLY("VDDD", "1-000a"), -}; - -static struct regulator_consumer_supply vvideo_consumers[] = { - /* sgtl5000 */ - REGULATOR_SUPPLY("VDDIO", "1-000a"), -}; - -static struct regulator_consumer_supply vsd_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"), - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"), -}; - -static struct regulator_consumer_supply pwgt1_consumer[] = { - { - .supply = "pwgt1", - } -}; - -static struct regulator_consumer_supply pwgt2_consumer[] = { - { - .supply = "pwgt2", - } -}; - -static struct regulator_consumer_supply coincell_consumer[] = { - { - .supply = "coincell", - } -}; - -static struct regulator_init_data sw1_init = { - .constraints = { - .name = "SW1", - .min_uV = 600000, - .max_uV = 1375000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .valid_modes_mask = 0, - .always_on = 1, - .boot_on = 1, - .state_mem = { - .uV = 850000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), - .consumer_supplies = sw1_consumers, -}; - -static struct regulator_init_data sw2_init = { - .constraints = { - .name = "SW2", - .min_uV = 900000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - .state_mem = { - .uV = 950000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - } -}; - -static struct regulator_init_data sw3_init = { - .constraints = { - .name = "SW3", - .min_uV = 1100000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data sw4_init = { - .constraints = { - .name = "SW4", - .min_uV = 1100000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data viohi_init = { - .constraints = { - .name = "VIOHI", - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vusb_init = { - .constraints = { - .name = "VUSB", - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data swbst_init = { - .constraints = { - .name = "SWBST", - } -}; - -static struct regulator_init_data vdig_init = { - .constraints = { - .name = "VDIG", - .min_uV = 1050000, - .max_uV = 1800000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vdig_consumers), - .consumer_supplies = vdig_consumers, -}; - -static struct regulator_init_data vpll_init = { - .constraints = { - .name = "VPLL", - .min_uV = 1050000, - .max_uV = 1800000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vusb2_init = { - .constraints = { - .name = "VUSB2", - .min_uV = 2400000, - .max_uV = 2775000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vvideo_init = { - .constraints = { - .name = "VVIDEO", - .min_uV = 2775000, - .max_uV = 2775000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .apply_uV = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers), - .consumer_supplies = vvideo_consumers, -}; - -static struct regulator_init_data vaudio_init = { - .constraints = { - .name = "VAUDIO", - .min_uV = 2300000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - } -}; - -static struct regulator_init_data vsd_init = { - .constraints = { - .name = "VSD", - .min_uV = 1800000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vsd_consumers), - .consumer_supplies = vsd_consumers, -}; - -static struct regulator_init_data vcam_init = { - .constraints = { - .name = "VCAM", - .min_uV = 2500000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, - .boot_on = 1, - } -}; - -static struct regulator_init_data vgen1_init = { - .constraints = { - .name = "VGEN1", - .min_uV = 1200000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vgen2_init = { - .constraints = { - .name = "VGEN2", - .min_uV = 1200000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vgen3_init = { - .constraints = { - .name = "VGEN3", - .min_uV = 1800000, - .max_uV = 2900000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data gpo1_init = { - .constraints = { - .name = "GPO1", - } -}; - -static struct regulator_init_data gpo2_init = { - .constraints = { - .name = "GPO2", - } -}; - -static struct regulator_init_data gpo3_init = { - .constraints = { - .name = "GPO3", - } -}; - -static struct regulator_init_data gpo4_init = { - .constraints = { - .name = "GPO4", - } -}; - -static struct regulator_init_data pwgt1_init = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer), - .consumer_supplies = pwgt1_consumer, -}; - -static struct regulator_init_data pwgt2_init = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer), - .consumer_supplies = pwgt2_consumer, -}; - -static struct regulator_init_data vcoincell_init = { - .constraints = { - .name = "COINCELL", - .min_uV = 3000000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(coincell_consumer), - .consumer_supplies = coincell_consumer, -}; - -static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { - { .id = MC13892_SW1, .init_data = &sw1_init }, - { .id = MC13892_SW2, .init_data = &sw2_init }, - { .id = MC13892_SW3, .init_data = &sw3_init }, - { .id = MC13892_SW4, .init_data = &sw4_init }, - { .id = MC13892_SWBST, .init_data = &swbst_init }, - { .id = MC13892_VIOHI, .init_data = &viohi_init }, - { .id = MC13892_VPLL, .init_data = &vpll_init }, - { .id = MC13892_VDIG, .init_data = &vdig_init }, - { .id = MC13892_VSD, .init_data = &vsd_init }, - { .id = MC13892_VUSB2, .init_data = &vusb2_init }, - { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, - { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, - { .id = MC13892_VCAM, .init_data = &vcam_init }, - { .id = MC13892_VGEN1, .init_data = &vgen1_init }, - { .id = MC13892_VGEN2, .init_data = &vgen2_init }, - { .id = MC13892_VGEN3, .init_data = &vgen3_init }, - { .id = MC13892_VUSB, .init_data = &vusb_init }, - { .id = MC13892_GPO1, .init_data = &gpo1_init }, - { .id = MC13892_GPO2, .init_data = &gpo2_init }, - { .id = MC13892_GPO3, .init_data = &gpo3_init }, - { .id = MC13892_GPO4, .init_data = &gpo4_init }, - { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init }, - { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init }, - { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init }, -}; - -static struct mc13xxx_platform_data mx51_efika_mc13892_data = { - .flags = MC13XXX_USE_RTC, - .regulators = { - .num_regulators = ARRAY_SIZE(mx51_efika_regulators), - .regulators = mx51_efika_regulators, - }, -}; - -static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .platform_data = &mx51_efika_spi_flash_data, - .irq = -1, - }, - { - .modalias = "mc13892", - .max_speed_hz = 1000000, - .bus_num = 0, - .chip_select = 0, - .platform_data = &mx51_efika_mc13892_data, - /* irq number is run-time assigned */ - }, -}; - -static int mx51_efika_spi_cs[] = { - EFIKAMX_SPI_CS0, - EFIKAMX_SPI_CS1, -}; - -static const struct spi_imx_master mx51_efika_spi_pdata __initconst = { - .chipselect = mx51_efika_spi_cs, - .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs), -}; - -void __init efika_board_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx51efika_pads, - ARRAY_SIZE(mx51efika_pads)); - imx51_add_imx_uart(0, &uart_pdata); - mx51_efika_usb(); - - /* FIXME: comes from original code. check this. */ - if (mx51_revision() < IMX_CHIP_REVISION_2_0) - sw2_init.constraints.state_mem.uV = 1100000; - else if (mx51_revision() == IMX_CHIP_REVISION_2_0) { - sw2_init.constraints.state_mem.uV = 1250000; - sw1_init.constraints.state_mem.uV = 1000000; - } - if (machine_is_mx51_efikasb()) - vgen1_init.constraints.max_uV = 1200000; - - gpio_request(EFIKAMX_PMIC, "pmic irq"); - gpio_direction_input(EFIKAMX_PMIC); - mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC); - spi_register_board_info(mx51_efika_spi_board_info, - ARRAY_SIZE(mx51_efika_spi_board_info)); - imx51_add_ecspi(0, &mx51_efika_spi_pdata); - - imx51_add_pata_imx(); - -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif -} diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index ab98c6fec9e..2ac43e1a2df 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -41,7 +41,7 @@ void __init imx_scu_map_io(void) scu_base = IMX_IO_ADDRESS(base); } -void __cpuinit platform_secondary_init(unsigned int cpu) +static void __cpuinit imx_secondary_init(unsigned int cpu) { /* * if any interrupts are already enabled for the primary @@ -51,7 +51,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) gic_secondary_init(0); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); imx_enable_cpu(cpu, true); @@ -62,7 +62,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ -void __init smp_init_cpus(void) +static void __init imx_smp_init_cpus(void) { int i, ncores; @@ -79,7 +79,17 @@ void imx_smp_prepare(void) scu_enable(scu_base); } -void __init platform_smp_prepare_cpus(unsigned int max_cpus) +static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); } + +struct smp_operations imx_smp_ops __initdata = { + .smp_init_cpus = imx_smp_init_cpus, + .smp_prepare_cpus = imx_smp_prepare_cpus, + .smp_secondary_init = imx_secondary_init, + .smp_boot_secondary = imx_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = imx_cpu_die, +#endif +}; |