summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r--arch/arm/mach-imx/Kconfig15
-rw-r--r--arch/arm/mach-imx/Makefile2
-rw-r--r--arch/arm/mach-imx/anatop.c33
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c42
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c197
-rw-r--r--arch/arm/mach-imx/clk-imx6sl.c3
-rw-r--r--arch/arm/mach-imx/clk-pllv3.c51
-rw-r--r--arch/arm/mach-imx/common.h185
-rw-r--r--arch/arm/mach-imx/cpu.c95
-rw-r--r--arch/arm/mach-imx/epit.c2
-rw-r--r--arch/arm/mach-imx/gpc.c4
-rw-r--r--arch/arm/mach-imx/hotplug.c4
-rw-r--r--arch/arm/mach-imx/imx51-dt.c6
-rw-r--r--arch/arm/mach-imx/mach-armadillo5x0.c3
-rw-r--r--arch/arm/mach-imx/mach-imx53.c6
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c93
-rw-r--r--arch/arm/mach-imx/mach-imx6sl.c40
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c2
-rw-r--r--arch/arm/mach-imx/mach-pca100.c2
-rw-r--r--arch/arm/mach-imx/mach-pcm037.c5
-rw-r--r--arch/arm/mach-imx/mach-pcm038.c2
-rw-r--r--arch/arm/mach-imx/mach-pcm043.c2
-rw-r--r--arch/arm/mach-imx/mach-vf610.c9
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c2
-rw-r--r--arch/arm/mach-imx/mm-imx5.c19
-rw-r--r--arch/arm/mach-imx/mx31lilly-db.c3
-rw-r--r--arch/arm/mach-imx/mxc.h6
-rw-r--r--arch/arm/mach-imx/pm-imx6q.c176
-rw-r--r--arch/arm/mach-imx/src.c16
-rw-r--r--arch/arm/mach-imx/system.c9
-rw-r--r--arch/arm/mach-imx/time.c2
31 files changed, 585 insertions, 451 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 29a8af6922a..7a6e6f71006 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -4,13 +4,14 @@ config ARCH_MXC
select ARM_CPU_SUSPEND if PM
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
+ select SOC_BUS
select SPARSE_IRQ
select USE_OF
help
@@ -24,7 +25,7 @@ config MXC_IRQ_PRIOR
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
- by lower priority IRQ even IRQF_DISABLED flag is not set.
+ by lower priority IRQ.
This may be useful in embedded applications, where are strong
requirements for timing.
Say N here, unless you have a specialized requirement.
@@ -92,14 +93,12 @@ config MACH_MX27
config SOC_IMX1
bool
select ARCH_MX1
- select COMMON_CLK
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX21
bool
- select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -108,7 +107,6 @@ config SOC_IMX25
bool
select ARCH_MX25
select ARCH_MXC_IOMUX_V3
- select COMMON_CLK
select CPU_ARM926T
select MXC_AVIC
@@ -116,7 +114,6 @@ config SOC_IMX27
bool
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
- select COMMON_CLK
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MACH_MX27
@@ -124,7 +121,6 @@ config SOC_IMX27
config SOC_IMX31
bool
- select COMMON_CLK
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
@@ -133,7 +129,6 @@ config SOC_IMX31
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
- select COMMON_CLK
select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
@@ -144,7 +139,6 @@ config SOC_IMX5
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
- select COMMON_CLK
select CPU_V7
select MXC_TZIC
@@ -791,7 +785,6 @@ config SOC_IMX6Q
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_GIC
- select COMMON_CLK
select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
@@ -801,6 +794,8 @@ config SOC_IMX6Q
select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
+ select MIGHT_HAVE_PCI
+ select PCI_DOMAINS if PCI
select PINCTRL
select PINCTRL_IMX6Q
select PL310_ERRATA_588369 if CACHE_PL310
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 5383c589ad7..1789e2b3190 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -102,6 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
+# i.MX6SL reuses i.MX6Q code
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
endif
# i.MX5 based machines
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index ad3b755abb7..4a40bbb4618 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -16,6 +16,7 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include "common.h"
+#include "hardware.h"
#define REG_SET 0x4
#define REG_CLR 0x8
@@ -26,6 +27,7 @@
#define ANADIG_USB1_CHRG_DETECT 0x1b0
#define ANADIG_USB2_CHRG_DETECT 0x210
#define ANADIG_DIGPROG 0x260
+#define ANADIG_DIGPROG_IMX6SL 0x280
#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
@@ -76,21 +78,38 @@ static void imx_anatop_usb_chrg_detect_disable(void)
BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
}
-u32 imx_anatop_get_digprog(void)
+void __init imx_init_revision_from_anatop(void)
{
struct device_node *np;
void __iomem *anatop_base;
- static u32 digprog;
-
- if (digprog)
- return digprog;
+ unsigned int revision;
+ u32 digprog;
+ u16 offset = ANADIG_DIGPROG;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
anatop_base = of_iomap(np, 0);
WARN_ON(!anatop_base);
- digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+ if (of_device_is_compatible(np, "fsl,imx6sl-anatop"))
+ offset = ANADIG_DIGPROG_IMX6SL;
+ digprog = readl_relaxed(anatop_base + offset);
+ iounmap(anatop_base);
+
+ switch (digprog & 0xff) {
+ case 0:
+ revision = IMX_CHIP_REVISION_1_0;
+ break;
+ case 1:
+ revision = IMX_CHIP_REVISION_1_1;
+ break;
+ case 2:
+ revision = IMX_CHIP_REVISION_1_2;
+ break;
+ default:
+ revision = IMX_CHIP_REVISION_UNKNOWN;
+ }
- return digprog;
+ mxc_set_cpu_type(digprog >> 16 & 0xff);
+ imx_set_soc_revision(revision);
}
void __init imx_anatop_init(void)
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 7c0dc4540aa..ce37af26ff8 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -11,8 +11,12 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include "crm-regs-imx5.h"
#include "clk.h"
@@ -131,8 +135,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
{
int i;
- of_clk_init(NULL);
-
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil);
clk[osc] = imx_obtain_fixed_clock("osc", rate_osc);
@@ -465,12 +467,17 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
return 0;
}
-int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
- unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init_dt(struct device_node *np)
{
- int i;
+ mx51_clocks_init(0, 0, 0, 0);
+}
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+
+static void __init mx53_clocks_init(struct device_node *np)
+{
+ int i, irq;
unsigned long r;
- struct device_node *np;
+ void __iomem *base;
clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -529,12 +536,11 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
pr_err("i.MX53 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
- np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm");
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+ mx5_clocks_common_init(0, 0, 0, 0);
clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
@@ -557,9 +563,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_a_podf], 200000000);
clk_set_rate(clk[esdhc_b_podf], 200000000);
- /* System timer */
- mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
-
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
clk_disable_unprepare(clk[iim_gate]);
@@ -567,15 +570,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
r = clk_round_rate(clk[usboh3_per_gate], 54000000);
clk_set_rate(clk[usboh3_per_gate], r);
- return 0;
-}
-
-int __init mx51_clocks_init_dt(void)
-{
- return mx51_clocks_init(0, 0, 0, 0);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
- return mx53_clocks_init(0, 0, 0, 0);
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+ mxc_timer_init(base, irq);
}
+CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 9181a241d3a..04cfd0fcb0e 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -14,7 +14,6 @@
#include <linux/types.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
-#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
@@ -25,155 +24,6 @@
#include "common.h"
#include "hardware.h"
-#define CCR 0x0
-#define BM_CCR_WB_COUNT (0x7 << 16)
-#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21)
-#define BM_CCR_RBC_EN (0x1 << 27)
-
-#define CCGR0 0x68
-#define CCGR1 0x6c
-#define CCGR2 0x70
-#define CCGR3 0x74
-#define CCGR4 0x78
-#define CCGR5 0x7c
-#define CCGR6 0x80
-#define CCGR7 0x84
-
-#define CLPCR 0x54
-#define BP_CLPCR_LPM 0
-#define BM_CLPCR_LPM (0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
-#define BM_CLPCR_SBYOS (0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
-#define BM_CLPCR_VSTBY (0x1 << 8)
-#define BP_CLPCR_STBY_COUNT 9
-#define BM_CLPCR_STBY_COUNT (0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
-
-#define CGPR 0x64
-#define BM_CGPR_CHICKEN_BIT (0x1 << 17)
-
-static void __iomem *ccm_base;
-
-void imx6q_set_chicken_bit(void)
-{
- u32 val = readl_relaxed(ccm_base + CGPR);
-
- val |= BM_CGPR_CHICKEN_BIT;
- writel_relaxed(val, ccm_base + CGPR);
-}
-
-static void imx6q_enable_rbc(bool enable)
-{
- u32 val;
- static bool last_rbc_mode;
-
- if (last_rbc_mode == enable)
- return;
- /*
- * need to mask all interrupts in GPC before
- * operating RBC configurations
- */
- imx_gpc_mask_all();
-
- /* configure RBC enable bit */
- val = readl_relaxed(ccm_base + CCR);
- val &= ~BM_CCR_RBC_EN;
- val |= enable ? BM_CCR_RBC_EN : 0;
- writel_relaxed(val, ccm_base + CCR);
-
- /* configure RBC count */
- val = readl_relaxed(ccm_base + CCR);
- val &= ~BM_CCR_RBC_BYPASS_COUNT;
- val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
- writel(val, ccm_base + CCR);
-
- /*
- * need to delay at least 2 cycles of CKIL(32K)
- * due to hardware design requirement, which is
- * ~61us, here we use 65us for safe
- */
- udelay(65);
-
- /* restore GPC interrupt mask settings */
- imx_gpc_restore_all();
-
- last_rbc_mode = enable;
-}
-
-static void imx6q_enable_wb(bool enable)
-{
- u32 val;
- static bool last_wb_mode;
-
- if (last_wb_mode == enable)
- return;
-
- /* configure well bias enable bit */
- val = readl_relaxed(ccm_base + CLPCR);
- val &= ~BM_CLPCR_WB_PER_AT_LPM;
- val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
- writel_relaxed(val, ccm_base + CLPCR);
-
- /* configure well bias count */
- val = readl_relaxed(ccm_base + CCR);
- val &= ~BM_CCR_WB_COUNT;
- val |= enable ? BM_CCR_WB_COUNT : 0;
- writel_relaxed(val, ccm_base + CCR);
-
- last_wb_mode = enable;
-}
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
- u32 val = readl_relaxed(ccm_base + CLPCR);
-
- val &= ~BM_CLPCR_LPM;
- switch (mode) {
- case WAIT_CLOCKED:
- imx6q_enable_wb(false);
- imx6q_enable_rbc(false);
- break;
- case WAIT_UNCLOCKED:
- val |= 0x1 << BP_CLPCR_LPM;
- val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
- break;
- case STOP_POWER_ON:
- val |= 0x2 << BP_CLPCR_LPM;
- break;
- case WAIT_UNCLOCKED_POWER_OFF:
- val |= 0x1 << BP_CLPCR_LPM;
- val &= ~BM_CLPCR_VSTBY;
- val &= ~BM_CLPCR_SBYOS;
- break;
- case STOP_POWER_OFF:
- val |= 0x2 << BP_CLPCR_LPM;
- val |= 0x3 << BP_CLPCR_STBY_COUNT;
- val |= BM_CLPCR_VSTBY;
- val |= BM_CLPCR_SBYOS;
- imx6q_enable_wb(true);
- imx6q_enable_rbc(true);
- break;
- default:
- return -EINVAL;
- }
-
- writel_relaxed(val, ccm_base + CLPCR);
-
- return 0;
-}
-
static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
@@ -182,7 +32,7 @@ static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
-static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
@@ -196,7 +46,7 @@ static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di
static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
static const char *pcie_axi_sels[] = { "axi", "ahb", };
-static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
@@ -205,7 +55,7 @@ static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
- "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+ "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
static const char *cko2_sels[] = {
"mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
"gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
@@ -217,6 +67,11 @@ static const char *cko2_sels[] = {
"uart_serial", "spdif", "asrc", "hsi_tx",
};
static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
+ "pcie_ref", "sata_ref",
+};
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -251,7 +106,8 @@ enum mx6q_clks {
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max
+ spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
};
static struct clk *clk[clk_max];
@@ -266,13 +122,14 @@ static struct clk_div_table clk_enet_ref_table[] = {
{ .val = 1, .div = 10, },
{ .val = 2, .div = 5, },
{ .val = 3, .div = 4, },
+ { /* sentinel */ }
};
static struct clk_div_table post_div_table[] = {
{ .val = 2, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 0, .div = 4, },
- { }
+ { /* sentinel */ }
};
static struct clk_div_table video_div_table[] = {
@@ -280,7 +137,7 @@ static struct clk_div_table video_div_table[] = {
{ .val = 1, .div = 2, },
{ .val = 2, .div = 1, },
{ .val = 3, .div = 4, },
- { }
+ { /* sentinel */ }
};
static void __init imx6q_clocks_init(struct device_node *ccm_node)
@@ -300,7 +157,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
WARN_ON(!base);
/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
- if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+ if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
post_div_table[1].div = 1;
post_div_table[2].div = 1;
video_div_table[1].div = 1;
@@ -342,6 +199,18 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
base + 0xe0, 0, 2, 0, clk_enet_ref_table,
&imx_ccm_lock);
+ clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+ /*
+ * lvds1_gate and lvds2_gate are pseudo-gates. Both can be
+ * independently configured as clock inputs or outputs. We treat
+ * the "output_enable" bit as a gate, even though it's really just
+ * enabling clock output.
+ */
+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
@@ -359,13 +228,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
np = ccm_node;
base = of_iomap(np, 0);
WARN_ON(!base);
- ccm_base = base;
+
+ imx6q_pm_set_ccm_base(base);
/* name reg shift width parent_names num_parents */
clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
@@ -428,7 +299,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
- clk[can_root] = imx_clk_divider("can_root", "pll3_usb_otg", base + 0x20, 2, 6);
+ clk[can_root] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
@@ -573,7 +444,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
- if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) {
+ if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
+ cpu_is_imx6dl()) {
clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
}
@@ -603,8 +475,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
if (ret)
pr_warn("failed to set up CLKO: %d\n", ret);
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
+ /* All existing boards with PCIe use LVDS1 */
+ if (IS_ENABLED(CONFIG_PCI_IMX6))
+ clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index a5c3c5d21ae..c0c4ef55e35 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -127,6 +127,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
base = of_iomap(np, 0);
WARN_ON(!base);
+ /* Reuse imx6q pm code */
+ imx6q_pm_set_ccm_base(base);
+
/* name reg shift width parent_names num_parents */
clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
index f6640b6a7b3..61364050fcc 100644
--- a/arch/arm/mach-imx/clk-pllv3.c
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/clk-provider.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
@@ -45,33 +46,49 @@ struct clk_pllv3 {
#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
+static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+ u32 val = readl_relaxed(pll->base) & BM_PLL_POWER;
+
+ /* No need to wait for lock when pll is not powered up */
+ if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
+ return 0;
+
+ /* Wait for PLL to lock */
+ do {
+ if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+ break;
+ if (time_after(jiffies, timeout))
+ break;
+ usleep_range(50, 500);
+ } while (1);
+
+ return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
+}
+
static int clk_pllv3_prepare(struct clk_hw *hw)
{
struct clk_pllv3 *pll = to_clk_pllv3(hw);
- unsigned long timeout;
u32 val;
+ int ret;
val = readl_relaxed(pll->base);
- val &= ~BM_PLL_BYPASS;
if (pll->powerup_set)
val |= BM_PLL_POWER;
else
val &= ~BM_PLL_POWER;
writel_relaxed(val, pll->base);
- timeout = jiffies + msecs_to_jiffies(10);
- /* Wait for PLL to lock */
- do {
- if (readl_relaxed(pll->base) & BM_PLL_LOCK)
- break;
- if (time_after(jiffies, timeout))
- break;
- } while (1);
+ ret = clk_pllv3_wait_lock(pll);
+ if (ret)
+ return ret;
- if (readl_relaxed(pll->base) & BM_PLL_LOCK)
- return 0;
- else
- return -ETIMEDOUT;
+ val = readl_relaxed(pll->base);
+ val &= ~BM_PLL_BYPASS;
+ writel_relaxed(val, pll->base);
+
+ return 0;
}
static void clk_pllv3_unprepare(struct clk_hw *hw)
@@ -146,7 +163,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
val |= div;
writel_relaxed(val, pll->base);
- return 0;
+ return clk_pllv3_wait_lock(pll);
}
static const struct clk_ops clk_pllv3_ops = {
@@ -202,7 +219,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
val |= div;
writel_relaxed(val, pll->base);
- return 0;
+ return clk_pllv3_wait_lock(pll);
}
static const struct clk_ops clk_pllv3_sys_ops = {
@@ -276,7 +293,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
- return 0;
+ return clk_pllv3_wait_lock(pll);
}
static const struct clk_ops clk_pllv3_av_ops = {
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 4517fd760bf..24a7899e36a 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -13,74 +13,73 @@
#include <linux/reboot.h>
+struct irq_data;
struct platform_device;
struct pt_regs;
struct clk;
enum mxc_cpu_pwr_mode;
-extern void mx1_map_io(void);
-extern void mx21_map_io(void);
-extern void mx25_map_io(void);
-extern void mx27_map_io(void);
-extern void mx31_map_io(void);
-extern void mx35_map_io(void);
-extern void mx51_map_io(void);
-extern void mx53_map_io(void);
-extern void imx1_init_early(void);
-extern void imx21_init_early(void);
-extern void imx25_init_early(void);
-extern void imx27_init_early(void);
-extern void imx31_init_early(void);
-extern void imx35_init_early(void);
-extern void imx51_init_early(void);
-extern void imx53_init_early(void);
-extern void mxc_init_irq(void __iomem *);
-extern void tzic_init_irq(void __iomem *);
-extern void mx1_init_irq(void);
-extern void mx21_init_irq(void);
-extern void mx25_init_irq(void);
-extern void mx27_init_irq(void);
-extern void mx31_init_irq(void);
-extern void mx35_init_irq(void);
-extern void mx51_init_irq(void);
-extern void mx53_init_irq(void);
-extern void imx1_soc_init(void);
-extern void imx21_soc_init(void);
-extern void imx25_soc_init(void);
-extern void imx27_soc_init(void);
-extern void imx31_soc_init(void);
-extern void imx35_soc_init(void);
-extern void imx51_soc_init(void);
-extern void imx51_init_late(void);
-extern void imx53_init_late(void);
-extern void epit_timer_init(void __iomem *base, int irq);
-extern void mxc_timer_init(void __iomem *, int);
-extern int mx1_clocks_init(unsigned long fref);
-extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(void);
-extern int mx27_clocks_init(unsigned long fref);
-extern int mx31_clocks_init(unsigned long fref);
-extern int mx35_clocks_init(void);
-extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+void mx1_map_io(void);
+void mx21_map_io(void);
+void mx25_map_io(void);
+void mx27_map_io(void);
+void mx31_map_io(void);
+void mx35_map_io(void);
+void mx51_map_io(void);
+void mx53_map_io(void);
+void imx1_init_early(void);
+void imx21_init_early(void);
+void imx25_init_early(void);
+void imx27_init_early(void);
+void imx31_init_early(void);
+void imx35_init_early(void);
+void imx51_init_early(void);
+void imx53_init_early(void);
+void mxc_init_irq(void __iomem *);
+void tzic_init_irq(void __iomem *);
+void mx1_init_irq(void);
+void mx21_init_irq(void);
+void mx25_init_irq(void);
+void mx27_init_irq(void);
+void mx31_init_irq(void);
+void mx35_init_irq(void);
+void mx51_init_irq(void);
+void mx53_init_irq(void);
+void imx1_soc_init(void);
+void imx21_soc_init(void);
+void imx25_soc_init(void);
+void imx27_soc_init(void);
+void imx31_soc_init(void);
+void imx35_soc_init(void);
+void imx51_soc_init(void);
+void imx51_init_late(void);
+void imx53_init_late(void);
+void epit_timer_init(void __iomem *base, int irq);
+void mxc_timer_init(void __iomem *, int);
+int mx1_clocks_init(unsigned long fref);
+int mx21_clocks_init(unsigned long lref, unsigned long fref);
+int mx25_clocks_init(void);
+int mx27_clocks_init(unsigned long fref);
+int mx31_clocks_init(unsigned long fref);
+int mx35_clocks_init(void);
+int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
-extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2);
-extern int mx25_clocks_init_dt(void);
-extern int mx27_clocks_init_dt(void);
-extern int mx31_clocks_init_dt(void);
-extern int mx51_clocks_init_dt(void);
-extern int mx53_clocks_init_dt(void);
-extern struct platform_device *mxc_register_gpio(char *name, int id,
+int mx25_clocks_init_dt(void);
+int mx27_clocks_init_dt(void);
+int mx31_clocks_init_dt(void);
+struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
-extern void mxc_set_cpu_type(unsigned int type);
-extern void mxc_restart(enum reboot_mode, const char *);
-extern void mxc_arch_reset_init(void __iomem *);
-extern void mxc_arch_reset_init_dt(void);
-extern int mx53_revision(void);
-extern int imx6q_revision(void);
-extern int mx53_display_revision(void);
-extern void imx_set_aips(void __iomem *);
-extern int mxc_device_init(void);
+void mxc_set_cpu_type(unsigned int type);
+void mxc_restart(enum reboot_mode, const char *);
+void mxc_arch_reset_init(void __iomem *);
+void mxc_arch_reset_init_dt(void);
+int mx53_revision(void);
+void imx_set_aips(void __iomem *);
+int mxc_device_init(void);
+void imx_set_soc_revision(unsigned int rev);
+unsigned int imx_get_soc_revision(void);
+void imx_init_revision_from_anatop(void);
+struct device *imx_soc_device_init(void);
enum mxc_cpu_pwr_mode {
WAIT_CLOCKED, /* wfi only */
@@ -97,8 +96,8 @@ enum mx3_cpu_pwr_mode {
MX3_SLEEP,
};
-extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-extern void imx_print_silicon_rev(const char *cpu, int srev);
+void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
+void imx_print_silicon_rev(const char *cpu, int srev);
void avic_handle_irq(struct pt_regs *);
void tzic_handle_irq(struct pt_regs *);
@@ -112,54 +111,56 @@ void tzic_handle_irq(struct pt_regs *);
#define imx51_handle_irq tzic_handle_irq
#define imx53_handle_irq tzic_handle_irq
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-extern u32 imx_get_cpu_arg(int cpu);
-extern void imx_set_cpu_arg(int cpu, u32 arg);
-extern void v7_cpu_resume(void);
+void imx_enable_cpu(int cpu, bool enable);
+void imx_set_cpu_jump(int cpu, void *jump_addr);
+u32 imx_get_cpu_arg(int cpu);
+void imx_set_cpu_arg(int cpu, u32 arg);
+void v7_cpu_resume(void);
#ifdef CONFIG_SMP
-extern void v7_secondary_startup(void);
-extern void imx_scu_map_io(void);
-extern void imx_smp_prepare(void);
-extern void imx_scu_standby_enable(void);
+void v7_secondary_startup(void);
+void imx_scu_map_io(void);
+void imx_smp_prepare(void);
+void imx_scu_standby_enable(void);
#else
static inline void imx_scu_map_io(void) {}
static inline void imx_smp_prepare(void) {}
static inline void imx_scu_standby_enable(void) {}
#endif
-extern void imx_src_init(void);
-extern void imx_src_prepare_restart(void);
-extern void imx_gpc_init(void);
-extern void imx_gpc_pre_suspend(void);
-extern void imx_gpc_post_resume(void);
-extern void imx_gpc_mask_all(void);
-extern void imx_gpc_restore_all(void);
-extern void imx_anatop_init(void);
-extern void imx_anatop_pre_suspend(void);
-extern void imx_anatop_post_resume(void);
-extern u32 imx_anatop_get_digprog(void);
-extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_set_chicken_bit(void);
-
-extern void imx_cpu_die(unsigned int cpu);
-extern int imx_cpu_kill(unsigned int cpu);
+void imx_src_init(void);
+void imx_gpc_init(void);
+void imx_gpc_pre_suspend(void);
+void imx_gpc_post_resume(void);
+void imx_gpc_mask_all(void);
+void imx_gpc_restore_all(void);
+void imx_gpc_irq_mask(struct irq_data *d);
+void imx_gpc_irq_unmask(struct irq_data *d);
+void imx_anatop_init(void);
+void imx_anatop_pre_suspend(void);
+void imx_anatop_post_resume(void);
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+void imx6q_set_chicken_bit(void);
+
+void imx_cpu_die(unsigned int cpu);
+int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_PM
-extern void imx6q_pm_init(void);
-extern void imx5_pm_init(void);
+void imx6q_pm_init(void);
+void imx6q_pm_set_ccm_base(void __iomem *base);
+void imx5_pm_init(void);
#else
static inline void imx6q_pm_init(void) {}
+static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
static inline void imx5_pm_init(void) {}
#endif
#ifdef CONFIG_NEON
-extern int mx51_neon_fixup(void);
+int mx51_neon_fixup(void);
#else
static inline int mx51_neon_fixup(void) { return 0; }
#endif
#ifdef CONFIG_CACHE_L2X0
-extern void imx_init_l2cache(void);
+void imx_init_l2cache(void);
#else
static inline void imx_init_l2cache(void) {}
#endif
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index e70e3acbf9b..ba3b498a67e 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -1,6 +1,9 @@
-
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include "hardware.h"
#include "common.h"
@@ -8,11 +11,23 @@
unsigned int __mxc_cpu_type;
EXPORT_SYMBOL(__mxc_cpu_type);
+static unsigned int imx_soc_revision;
+
void mxc_set_cpu_type(unsigned int type)
{
__mxc_cpu_type = type;
}
+void imx_set_soc_revision(unsigned int rev)
+{
+ imx_soc_revision = rev;
+}
+
+unsigned int imx_get_soc_revision(void)
+{
+ return imx_soc_revision;
+}
+
void imx_print_silicon_rev(const char *cpu, int srev)
{
if (srev == IMX_CHIP_REVISION_UNKNOWN)
@@ -44,3 +59,81 @@ void __init imx_set_aips(void __iomem *base)
reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
__raw_writel(reg, base + 0x50);
}
+
+struct device * __init imx_soc_device_init(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct device_node *root;
+ const char *soc_id;
+ int ret;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return NULL;
+
+ soc_dev_attr->family = "Freescale i.MX";
+
+ root = of_find_node_by_path("/");
+ ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+ of_node_put(root);
+ if (ret)
+ goto free_soc;
+
+ switch (__mxc_cpu_type) {
+ case MXC_CPU_MX1:
+ soc_id = "i.MX1";
+ break;
+ case MXC_CPU_MX21:
+ soc_id = "i.MX21";
+ break;
+ case MXC_CPU_MX25:
+ soc_id = "i.MX25";
+ break;
+ case MXC_CPU_MX27:
+ soc_id = "i.MX27";
+ break;
+ case MXC_CPU_MX31:
+ soc_id = "i.MX31";
+ break;
+ case MXC_CPU_MX35:
+ soc_id = "i.MX35";
+ break;
+ case MXC_CPU_MX51:
+ soc_id = "i.MX51";
+ break;
+ case MXC_CPU_MX53:
+ soc_id = "i.MX53";
+ break;
+ case MXC_CPU_IMX6SL:
+ soc_id = "i.MX6SL";
+ break;
+ case MXC_CPU_IMX6DL:
+ soc_id = "i.MX6DL";
+ break;
+ case MXC_CPU_IMX6Q:
+ soc_id = "i.MX6Q";
+ break;
+ default:
+ soc_id = "Unknown";
+ }
+ soc_dev_attr->soc_id = soc_id;
+
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
+ (imx_soc_revision >> 4) & 0xf,
+ imx_soc_revision & 0xf);
+ if (!soc_dev_attr->revision)
+ goto free_soc;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev))
+ goto free_rev;
+
+ return soc_device_to_device(soc_dev);
+
+free_rev:
+ kfree(soc_dev_attr->revision);
+free_soc:
+ kfree(soc_dev_attr);
+ return NULL;
+}
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index e02de188ae8..074b1a81ba7 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
static struct irqaction epit_timer_irq = {
.name = "i.MX EPIT Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = epit_timer_interrupt,
};
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 44a65e9ff1f..586e0171a65 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -90,7 +90,7 @@ void imx_gpc_restore_all(void)
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
}
-static void imx_gpc_irq_unmask(struct irq_data *d)
+void imx_gpc_irq_unmask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
@@ -105,7 +105,7 @@ static void imx_gpc_irq_unmask(struct irq_data *d)
writel_relaxed(val, reg);
}
-static void imx_gpc_irq_mask(struct irq_data *d)
+void imx_gpc_irq_mask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3daf1ed9057..b35e99cc5e5 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -52,7 +52,9 @@ void imx_cpu_die(unsigned int cpu)
* the register being cleared to kill the cpu.
*/
imx_set_cpu_arg(cpu, ~0);
- cpu_do_idle();
+
+ while (1)
+ cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 53e43e579dd..bece8a65e6f 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -34,17 +34,11 @@ static const char *imx51_dt_board_compat[] __initdata = {
NULL
};
-static void __init imx51_timer_init(void)
-{
- mx51_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
.handle_irq = imx51_handle_irq,
- .init_time = imx51_timer_init,
.init_machine = imx51_dt_init,
.init_late = imx51_init_late,
.dt_compat = imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 368a6e3f592..58b864a3fc2 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev,
/* When supported the trigger type have to be BOTH */
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
- detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ detect_irq, IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
if (ret)
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 98c58944015..c9c4d8d9693 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -36,17 +36,11 @@ static const char *imx53_dt_board_compat[] __initdata = {
NULL
};
-static void __init imx53_timer_init(void)
-{
- mx53_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
.handle_irq = imx53_handle_irq,
- .init_time = imx53_timer_init,
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 90372a21087..d0cfb225ec9 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -11,11 +11,8 @@
*/
#include <linux/clk.h>
-#include <linux/clk-provider.h>
#include <linux/clkdev.h>
-#include <linux/clocksource.h>
#include <linux/cpu.h>
-#include <linux/delay.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -25,7 +22,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
#include <linux/phy.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
@@ -40,64 +37,6 @@
#include "cpuidle.h"
#include "hardware.h"
-static u32 chip_revision;
-
-int imx6q_revision(void)
-{
- return chip_revision;
-}
-
-static void __init imx6q_init_revision(void)
-{
- u32 rev = imx_anatop_get_digprog();
-
- switch (rev & 0xff) {
- case 0:
- chip_revision = IMX_CHIP_REVISION_1_0;
- break;
- case 1:
- chip_revision = IMX_CHIP_REVISION_1_1;
- break;
- case 2:
- chip_revision = IMX_CHIP_REVISION_1_2;
- break;
- default:
- chip_revision = IMX_CHIP_REVISION_UNKNOWN;
- }
-
- mxc_set_cpu_type(rev >> 16 & 0xff);
-}
-
-static void imx6q_restart(enum reboot_mode mode, const char *cmd)
-{
- struct device_node *np;
- void __iomem *wdog_base;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
- wdog_base = of_iomap(np, 0);
- if (!wdog_base)
- goto soft;
-
- imx_src_prepare_restart();
-
- /* enable wdog */
- writew_relaxed(1 << 2, wdog_base);
- /* write twice to ensure the request will not get ignored */
- writew_relaxed(1 << 2, wdog_base);
-
- /* wait for reset to assert ... */
- mdelay(500);
-
- pr_err("Watchdog reset failed to assert reset\n");
-
- /* delay to allow the serial port to show the message */
- mdelay(50);
-
-soft:
- /* we'll take a jump through zero as a poor second */
- soft_restart(0);
-}
-
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
@@ -192,9 +131,20 @@ static void __init imx6q_1588_init(void)
static void __init imx6q_init_machine(void)
{
+ struct device *parent;
+
+ imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+ imx_get_soc_revision());
+
+ mxc_arch_reset_init_dt();
+
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
imx6q_enet_phy_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx_anatop_init();
imx6q_pm_init();
@@ -226,7 +176,7 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
val = readl_relaxed(base + OCOTP_CFG3);
val >>= OCOTP_CFG3_SPEED_SHIFT;
if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
- if (opp_disable(cpu_dev, 1200000000))
+ if (dev_pm_opp_disable(cpu_dev, 1200000000))
pr_warn("failed to disable 1.2 GHz OPP\n");
put_node:
@@ -269,7 +219,7 @@ static void __init imx6q_init_late(void)
* WAIT mode is broken on TO 1.0 and 1.1, so there is no point
* to run cpuidle on them.
*/
- if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
+ if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
imx6q_cpuidle_init();
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
@@ -286,21 +236,13 @@ static void __init imx6q_map_io(void)
static void __init imx6q_init_irq(void)
{
- imx6q_init_revision();
+ imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
imx_gpc_init();
irqchip_init();
}
-static void __init imx6q_timer_init(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
- imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
- imx6q_revision());
-}
-
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6dl",
"fsl,imx6q",
@@ -311,9 +253,8 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
.smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
- .init_time = imx6q_timer_init,
.init_machine = imx6q_init_machine,
.init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
- .restart = imx6q_restart,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 0d75dc54f71..2f952e3fcf8 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -7,35 +7,60 @@
*
*/
-#include <linux/clk-provider.h>
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/regmap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
+static void __init imx6sl_fec_init(void)
+{
+ struct regmap *gpr;
+
+ /* set FEC clock from internal PLL clock source */
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr");
+ if (!IS_ERR(gpr)) {
+ regmap_update_bits(gpr, IOMUXC_GPR1,
+ IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0);
+ regmap_update_bits(gpr, IOMUXC_GPR1,
+ IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0);
+ } else {
+ pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n");
+ }
+}
+
static void __init imx6sl_init_machine(void)
{
+ struct device *parent;
+
mxc_arch_reset_init_dt();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+
+ imx6sl_fec_init();
+ imx_anatop_init();
+ /* Reuse imx6q pm code */
+ imx6q_pm_init();
}
static void __init imx6sl_init_irq(void)
{
+ imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
imx_gpc_init();
irqchip_init();
}
-static void __init imx6sl_timer_init(void)
-{
- of_clk_init(NULL);
-}
-
static const char *imx6sl_dt_compat[] __initdata = {
"fsl,imx6sl",
NULL,
@@ -44,7 +69,6 @@ static const char *imx6sl_dt_compat[] __initdata = {
DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
.map_io = debug_ll_io_init,
.init_irq = imx6sl_init_irq,
- .init_time = imx6sl_timer_init,
.init_machine = imx6sl_init_machine,
.dt_compat = imx6sl_dt_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 1ed916175d4..50044a21b38 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev,
}
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
- detect_irq, IRQF_DISABLED |
+ detect_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
if (ret) {
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 19bb6441a7d..c5f95674e9b 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -20,7 +20,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index bc0261e99d3..639a3dfb009 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -23,7 +23,7 @@
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/irq.h>
@@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
#endif
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "sdhc-detect", data);
+ IRQF_TRIGGER_FALLING, "sdhc-detect", data);
if (ret)
goto err_gpio_free_2;
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index e805ac273e9..592ddbe031a 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -18,7 +18,7 @@
*/
#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
#include <linux/io.h>
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index b726cb1c5fd..ac504b67326 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -24,7 +24,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index 816991deb9b..af0cb8a9dc4 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -8,9 +8,7 @@
*/
#include <linux/of_platform.h>
-#include <linux/clocksource.h>
#include <linux/irqchip.h>
-#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
@@ -28,12 +26,6 @@ static void __init vf610_init_irq(void)
irqchip_init();
}
-static void __init vf610_init_time(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
static const char *vf610_dt_compat[] __initdata = {
"fsl,vf610",
NULL,
@@ -41,7 +33,6 @@ static const char *vf610_dt_compat[] __initdata = {
DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
.init_irq = vf610_init_irq,
- .init_time = vf610_init_time,
.init_machine = vf610_init_machine,
.dt_compat = vf610_dt_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 0910761e828..8825d1217d1 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -29,7 +29,7 @@
#include <asm/mach/time.h>
#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
#include <linux/mfd/mc13xxx.h>
#include "common.h"
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index eb3cce38c70..d1d52600f45 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/pinctrl/machine.h>
+#include <linux/of_address.h>
#include <asm/mach/map.h>
@@ -88,8 +89,15 @@ void __init imx51_init_early(void)
void __init imx53_init_early(void)
{
+ struct device_node *np;
+ void __iomem *base;
+
mxc_set_cpu_type(MXC_CPU_MX53);
- mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ mxc_iomux_v3_init(base);
imx_src_init();
}
@@ -100,7 +108,14 @@ void __init mx51_init_irq(void)
void __init mx53_init_irq(void)
{
- tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
+ struct device_node *np;
+ void __iomem *base;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ tzic_init_irq(base);
}
static struct sdma_platform_data imx51_sdma_pdata __initdata = {
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index d4361b80c5f..649fe49ce85 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev,
gpio_direction_input(gpio_wp);
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
- detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ detect_irq, IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 8629e5be7ec..b08ab3ad4a6 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -34,6 +34,7 @@
#define MXC_CPU_MX35 35
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
+#define MXC_CPU_IMX6SL 0x60
#define MXC_CPU_IMX6DL 0x61
#define MXC_CPU_IMX6Q 0x63
@@ -152,6 +153,11 @@ extern unsigned int __mxc_cpu_type;
#endif
#ifndef __ASSEMBLY__
+static inline bool cpu_is_imx6sl(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6SL;
+}
+
static inline bool cpu_is_imx6dl(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6DL;
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 204942749e2..aecd9f8037e 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -10,9 +10,15 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
@@ -22,6 +28,147 @@
#include "common.h"
#include "hardware.h"
+#define CCR 0x0
+#define BM_CCR_WB_COUNT (0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21)
+#define BM_CCR_RBC_EN (0x1 << 27)
+
+#define CLPCR 0x54
+#define BP_CLPCR_LPM 0
+#define BM_CLPCR_LPM (0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define BM_CLPCR_SBYOS (0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define BM_CLPCR_VSTBY (0x1 << 8)
+#define BP_CLPCR_STBY_COUNT 9
+#define BM_CLPCR_STBY_COUNT (0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
+
+#define CGPR 0x64
+#define BM_CGPR_CHICKEN_BIT (0x1 << 17)
+
+static void __iomem *ccm_base;
+
+void imx6q_set_chicken_bit(void)
+{
+ u32 val = readl_relaxed(ccm_base + CGPR);
+
+ val |= BM_CGPR_CHICKEN_BIT;
+ writel_relaxed(val, ccm_base + CGPR);
+}
+
+static void imx6q_enable_rbc(bool enable)
+{
+ u32 val;
+
+ /*
+ * need to mask all interrupts in GPC before
+ * operating RBC configurations
+ */
+ imx_gpc_mask_all();
+
+ /* configure RBC enable bit */
+ val = readl_relaxed(ccm_base + CCR);
+ val &= ~BM_CCR_RBC_EN;
+ val |= enable ? BM_CCR_RBC_EN : 0;
+ writel_relaxed(val, ccm_base + CCR);
+
+ /* configure RBC count */
+ val = readl_relaxed(ccm_base + CCR);
+ val &= ~BM_CCR_RBC_BYPASS_COUNT;
+ val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+ writel(val, ccm_base + CCR);
+
+ /*
+ * need to delay at least 2 cycles of CKIL(32K)
+ * due to hardware design requirement, which is
+ * ~61us, here we use 65us for safe
+ */
+ udelay(65);
+
+ /* restore GPC interrupt mask settings */
+ imx_gpc_restore_all();
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+ u32 val;
+
+ /* configure well bias enable bit */
+ val = readl_relaxed(ccm_base + CLPCR);
+ val &= ~BM_CLPCR_WB_PER_AT_LPM;
+ val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+ writel_relaxed(val, ccm_base + CLPCR);
+
+ /* configure well bias count */
+ val = readl_relaxed(ccm_base + CCR);
+ val &= ~BM_CCR_WB_COUNT;
+ val |= enable ? BM_CCR_WB_COUNT : 0;
+ writel_relaxed(val, ccm_base + CCR);
+}
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+ struct irq_desc *iomuxc_irq_desc;
+ u32 val = readl_relaxed(ccm_base + CLPCR);
+
+ val &= ~BM_CLPCR_LPM;
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ val |= 0x1 << BP_CLPCR_LPM;
+ val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
+ break;
+ case STOP_POWER_ON:
+ val |= 0x2 << BP_CLPCR_LPM;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ val |= 0x1 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ break;
+ case STOP_POWER_OFF:
+ val |= 0x2 << BP_CLPCR_LPM;
+ val |= 0x3 << BP_CLPCR_STBY_COUNT;
+ val |= BM_CLPCR_VSTBY;
+ val |= BM_CLPCR_SBYOS;
+ if (cpu_is_imx6sl()) {
+ val |= BM_CLPCR_BYPASS_PMIC_READY;
+ val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+ } else {
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Unmask the always pending IOMUXC interrupt #32 as wakeup source to
+ * deassert dsm_request signal, so that we can ensure dsm_request
+ * is not asserted when we're going to write CLPCR register to set LPM.
+ * After setting up LPM bits, we need to mask this wakeup source.
+ */
+ iomuxc_irq_desc = irq_to_desc(32);
+ imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
+ writel_relaxed(val, ccm_base + CLPCR);
+ imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data);
+
+ return 0;
+}
+
static int imx6q_suspend_finish(unsigned long val)
{
cpu_do_idle();
@@ -33,14 +180,19 @@ static int imx6q_pm_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_MEM:
imx6q_set_lpm(STOP_POWER_OFF);
+ imx6q_enable_wb(true);
+ imx6q_enable_rbc(true);
imx_gpc_pre_suspend();
imx_anatop_pre_suspend();
imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
cpu_suspend(0, imx6q_suspend_finish);
- imx_smp_prepare();
+ if (cpu_is_imx6q() || cpu_is_imx6dl())
+ imx_smp_prepare();
imx_anatop_post_resume();
imx_gpc_post_resume();
+ imx6q_enable_rbc(false);
+ imx6q_enable_wb(false);
imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
@@ -55,7 +207,29 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
.valid = suspend_valid_only_mem,
};
+void __init imx6q_pm_set_ccm_base(void __iomem *base)
+{
+ ccm_base = base;
+}
+
void __init imx6q_pm_init(void)
{
+ struct regmap *gpr;
+
+ WARN_ON(!ccm_base);
+
+ /*
+ * Force IOMUXC irq pending, so that the interrupt to GPC can be
+ * used to deassert dsm_request signal when the signal gets
+ * asserted unexpectedly.
+ */
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ if (!IS_ERR(gpr))
+ regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
+ IMX6Q_GPR1_GINT);
+
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
suspend_set_ops(&imx6q_pm_ops);
}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 10a6b1a8c5a..45f7f4e0a44 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -91,6 +91,7 @@ void imx_enable_cpu(int cpu, bool enable)
spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
+ val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
writel_relaxed(val, src_base + SRC_SCR);
spin_unlock(&scr_lock);
}
@@ -114,21 +115,6 @@ void imx_set_cpu_arg(int cpu, u32 arg)
writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
}
-void imx_src_prepare_restart(void)
-{
- u32 val;
-
- /* clear enable bits of secondary cores */
- spin_lock(&scr_lock);
- val = readl_relaxed(src_base + SRC_SCR);
- val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
- writel_relaxed(val, src_base + SRC_SCR);
- spin_unlock(&scr_lock);
-
- /* clear persistent entry register of primary core */
- writel_relaxed(0, src_base + SRC_GPR1);
-}
-
void __init imx_src_init(void)
{
struct device_node *np;
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 80c177c36c5..5e3027d3692 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -52,6 +52,15 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
/* Assert SRS signal */
__raw_writew(wcr_enable, wdog_base);
+ /*
+ * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
+ * written twice), we add another two writes to ensure there must be at
+ * least two writes happen in the same one 32kHz clock period. We save
+ * the target check here, since the writes shouldn't be a huge burden
+ * for other platforms.
+ */
+ __raw_writew(wcr_enable, wdog_base);
+ __raw_writew(wcr_enable, wdog_base);
/* wait for reset to assert... */
mdelay(500);
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index cd46529e9ea..9b6638aadea 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
static struct irqaction mxc_timer_irq = {
.name = "i.MX Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = mxc_timer_interrupt,
};