summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r--arch/arm/mach-imx/Kconfig22
-rw-r--r--arch/arm/mach-imx/Makefile1
-rw-r--r--arch/arm/mach-imx/clk-imx1.c3
-rw-r--r--arch/arm/mach-imx/clk-imx21.c4
-rw-r--r--arch/arm/mach-imx/clk-imx25.c2
-rw-r--r--arch/arm/mach-imx/clk-imx27.c15
-rw-r--r--arch/arm/mach-imx/clk-imx31.c28
-rw-r--r--arch/arm/mach-imx/clk-imx35.c15
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c36
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c49
-rw-r--r--arch/arm/mach-imx/clk-pllv2.c93
-rw-r--r--arch/arm/mach-imx/crm-regs-imx5.h2
-rw-r--r--arch/arm/mach-imx/devices-imx21.h4
-rw-r--r--arch/arm/mach-imx/devices-imx25.h4
-rw-r--r--arch/arm/mach-imx/devices-imx27.h6
-rw-r--r--arch/arm/mach-imx/devices-imx31.h10
-rw-r--r--arch/arm/mach-imx/devices-imx35.h12
-rw-r--r--arch/arm/mach-imx/devices-imx51.h2
-rw-r--r--arch/arm/mach-imx/devices-imx53.h2
-rw-r--r--arch/arm/mach-imx/ehci-imx25.c24
-rw-r--r--arch/arm/mach-imx/ehci-imx35.c24
-rw-r--r--arch/arm/mach-imx/ehci-imx5.c31
-rw-r--r--arch/arm/mach-imx/eukrea_mbimx27-baseboard.c3
-rw-r--r--arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c6
-rw-r--r--arch/arm/mach-imx/hotplug.c42
-rw-r--r--arch/arm/mach-imx/imx27-dt.c30
-rw-r--r--arch/arm/mach-imx/imx31-dt.c63
-rw-r--r--arch/arm/mach-imx/imx51-dt.c27
-rw-r--r--arch/arm/mach-imx/imx53-dt.c28
-rw-r--r--arch/arm/mach-imx/mach-apf9328.c7
-rw-r--r--arch/arm/mach-imx/mach-armadillo5x0.c18
-rw-r--r--arch/arm/mach-imx/mach-cpuimx27.c24
-rw-r--r--arch/arm/mach-imx/mach-cpuimx35.c14
-rw-r--r--arch/arm/mach-imx/mach-cpuimx51sd.c14
-rw-r--r--arch/arm/mach-imx/mach-eukrea_cpuimx25.c12
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c47
-rw-r--r--arch/arm/mach-imx/mach-imx27ipcam.c2
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c74
-rw-r--r--arch/arm/mach-imx/mach-kzm_arm11_01.c20
-rw-r--r--arch/arm/mach-imx/mach-mx1ads.c1
-rw-r--r--arch/arm/mach-imx/mach-mx21ads.c18
-rw-r--r--arch/arm/mach-imx/mach-mx25_3ds.c4
-rw-r--r--arch/arm/mach-imx/mach-mx27_3ds.c17
-rw-r--r--arch/arm/mach-imx/mach-mx27ads.c14
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c28
-rw-r--r--arch/arm/mach-imx/mach-mx31ads.c63
-rw-r--r--arch/arm/mach-imx/mach-mx31lilly.c10
-rw-r--r--arch/arm/mach-imx/mach-mx31lite.c11
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c12
-rw-r--r--arch/arm/mach-imx/mach-mx35_3ds.c29
-rw-r--r--arch/arm/mach-imx/mach-mx51_3ds.c5
-rw-r--r--arch/arm/mach-imx/mach-mx51_babbage.c10
-rw-r--r--arch/arm/mach-imx/mach-mx53_ard.c8
-rw-r--r--arch/arm/mach-imx/mach-mx53_evk.c3
-rw-r--r--arch/arm/mach-imx/mach-mx53_loco.c3
-rw-r--r--arch/arm/mach-imx/mach-mx53_smd.c3
-rw-r--r--arch/arm/mach-imx/mach-mxt_td60.c6
-rw-r--r--arch/arm/mach-imx/mach-pca100.c17
-rw-r--r--arch/arm/mach-imx/mach-pcm037.c36
-rw-r--r--arch/arm/mach-imx/mach-pcm038.c8
-rw-r--r--arch/arm/mach-imx/mach-pcm043.c16
-rw-r--r--arch/arm/mach-imx/mach-qong.c12
-rw-r--r--arch/arm/mach-imx/mach-scb9328.c7
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c12
-rw-r--r--arch/arm/mach-imx/mm-imx1.c1
-rw-r--r--arch/arm/mach-imx/mm-imx21.c1
-rw-r--r--arch/arm/mach-imx/mm-imx25.c11
-rw-r--r--arch/arm/mach-imx/mm-imx27.c1
-rw-r--r--arch/arm/mach-imx/mm-imx3.c12
-rw-r--r--arch/arm/mach-imx/mm-imx5.c68
-rw-r--r--arch/arm/mach-imx/mx31lilly-db.c11
-rw-r--r--arch/arm/mach-imx/mx31lite-db.c9
-rw-r--r--arch/arm/mach-imx/mx51_efika.c3
-rw-r--r--arch/arm/mach-imx/pcm970-baseboard.c13
-rw-r--r--arch/arm/mach-imx/pm-imx5.c111
75 files changed, 844 insertions, 570 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0021f726b15..afd542ad6f9 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -52,6 +52,7 @@ config SOC_IMX25
select ARCH_MX25
select COMMON_CLK
select CPU_ARM926T
+ select HAVE_CAN_FLEXCAN if CAN
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
@@ -73,12 +74,13 @@ config SOC_IMX31
config SOC_IMX35
bool
- select CPU_V6
+ select CPU_V6K
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
+ select HAVE_CAN_FLEXCAN if CAN
config SOC_IMX5
select CPU_V7
@@ -105,6 +107,7 @@ config SOC_IMX53
select SOC_IMX5
select ARCH_MX5
select ARCH_MX53
+ select HAVE_CAN_FLEXCAN if CAN
if ARCH_IMX_V4_V5
@@ -158,7 +161,6 @@ config MACH_MX25_3DS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
@@ -380,7 +382,6 @@ config MACH_IMX27IPCAM
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
- select USE_OF
help
Include support for Freescale i.MX27 based platforms
using the device tree for discovery
@@ -477,6 +478,7 @@ config MACH_MX31_3DS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -556,6 +558,14 @@ config MACH_BUG
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
+config MACH_IMX31_DT
+ bool "Support i.MX31 platforms from device tree"
+ select SOC_IMX31
+ select USE_OF
+ help
+ Include support for Freescale i.MX31 based platforms
+ using the device tree for discovery.
+
comment "MX35 platforms:"
config MACH_PCM043
@@ -588,6 +598,7 @@ config MACH_MX35_3DS
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for MX35PDK platform. This includes specific
@@ -662,7 +673,6 @@ comment "i.MX51 machines:"
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
select SOC_IMX51
- select USE_OF
select MACH_MX51_BABBAGE
help
Include support for Freescale i.MX51 based platforms
@@ -758,7 +768,6 @@ comment "i.MX53 machines:"
config MACH_IMX53_DT
bool "Support i.MX53 platforms from device tree"
select SOC_IMX53
- select USE_OF
select MACH_MX53_ARD
select MACH_MX53_EVK
select MACH_MX53_LOCO
@@ -825,13 +834,14 @@ config SOC_IMX6Q
select COMMON_CLK
select CPU_V7
select HAVE_ARM_SCU
+ select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
+ select MFD_ANATOP
select PINCTRL
select PINCTRL_IMX6Q
- select USE_OF
help
This enables support for Freescale i.MX6 Quad processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ff29421414f..07f7c226e4c 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
obj-$(CONFIG_MACH_BUG) += mach-bug.o
+obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 0f0beb580b7..516ddee1948 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref)
clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
- mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
- MX1_TIM1_INT);
+ mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index 4e4f384ee8d..ea13e61bd5f 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
- mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
- MX21_INT_GPT1);
+ mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index d9833bb5fd6..fdd8cc87c9f 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -243,6 +243,6 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
- mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+ mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 50a7ebd8d1b..f69ca468004 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
- clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
@@ -250,24 +250,27 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma");
- clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma");
+ clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0");
+ clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
+ clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
- clk_register_clkdev(clk[rtc_ipg_gate], "rtc", NULL);
+ clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc");
clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], "cpu", NULL);
clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
- mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
- MX27_INT_GPT1);
+ mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[emi_ahb_gate]);
+ imx_print_silicon_rev("i.MX27", mx27_revision());
+
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index a854b9cae5e..1253af2d997 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -20,6 +20,7 @@
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/mx31.h>
@@ -123,13 +124,13 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+ clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc");
clk_register_clkdev(clk[epit1_gate], "epit", NULL);
clk_register_clkdev(clk[epit2_gate], "epit", NULL);
clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
- clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+ clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
@@ -165,7 +166,7 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[firi_gate], "firi", NULL);
clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
- clk_register_clkdev(clk[rng_gate], "rng", NULL);
+ clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga");
clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
@@ -175,8 +176,25 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
- mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
- MX31_INT_GPT);
+ mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
+
+#ifdef CONFIG_OF
+int __init mx31_clocks_init_dt(void)
+{
+ struct device_node *np;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(np, "clock-frequency", &fref))
+ break;
+ }
+
+ return mx31_clocks_init(fref);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index a9e60bf7dd7..c6422fb10ba 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -201,7 +201,6 @@ int __init mx35_clocks_init()
pr_err("i.MX35 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@@ -264,14 +263,20 @@ int __init mx35_clocks_init()
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(&epit1_clk,
- MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+ epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
- mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
- MX35_INT_GPT);
+ mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
#endif
return 0;
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 7b525c1230d..e81f17a70f0 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -58,7 +58,7 @@ enum imx5_clks {
tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
- gpt_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate,
+ gpt_hf_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate,
esdhc3_ipg_gate, esdhc4_ipg_gate, ssi1_ipg_gate, ssi2_ipg_gate,
ssi3_ipg_gate, ecspi1_ipg_gate, ecspi1_per_gate, ecspi2_ipg_gate,
ecspi2_per_gate, cspi_ipg_gate, sdma_gate, emi_slow_gate, ipu_s,
@@ -81,6 +81,7 @@ enum imx5_clks {
ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred,
ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
+ epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
clk_max
};
@@ -104,12 +105,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
main_bus_sel, ARRAY_SIZE(main_bus_sel));
- clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+ clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
- clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+ clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
per_root_sel, ARRAY_SIZE(per_root_sel));
clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
@@ -167,12 +168,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[uart3_per_gate] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16);
clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18);
clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20);
- clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 20);
clk[pwm1_ipg_gate] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10);
- clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
+ clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "per_root", MXC_CCM_CCGR2, 12);
clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
- clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
- clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "per_root", MXC_CCM_CCGR2, 16);
+ clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[gpt_hf_gate] = imx_clk_gate2("gpt_hf_gate", "per_root", MXC_CCM_CCGR2, 20);
clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
@@ -226,13 +227,17 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26);
clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28);
clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30);
+ clk[epit1_ipg_gate] = imx_clk_gate2("epit1_ipg_gate", "ipg", MXC_CCM_CCGR2, 2);
+ clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4);
+ clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
+ clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
pr_err("i.MX5 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
- clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_hf_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
@@ -248,7 +253,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[ecspi1_ipg_gate], "ipg", "imx51-ecspi.0");
clk_register_clkdev(clk[ecspi2_per_gate], "per", "imx51-ecspi.1");
clk_register_clkdev(clk[ecspi2_ipg_gate], "ipg", "imx51-ecspi.1");
- clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx51-cspi.0");
+ clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2");
clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
@@ -279,6 +284,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
+ clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
+ clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0");
+ clk_register_clkdev(clk[epit1_hf_gate], "per", "imx-epit.0");
+ clk_register_clkdev(clk[epit2_ipg_gate], "ipg", "imx-epit.1");
+ clk_register_clkdev(clk[epit2_hf_gate], "per", "imx-epit.1");
/* Set SDHC parents to be PLL2 */
clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]);
@@ -293,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_prepare_enable(clk[aips_tz2]); /* fec */
clk_prepare_enable(clk[spba]);
clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+ clk_prepare_enable(clk[emi_slow_gate]); /* eim */
clk_prepare_enable(clk[tmax1]);
clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
@@ -336,7 +347,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
- clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu");
clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu");
clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu");
@@ -367,8 +377,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_b_podf], 166250000);
/* System timer */
- mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
+ mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX51", mx51_revision());
@@ -454,8 +463,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
- mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
+ mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index cab02d0a15d..ea89520b6e2 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
-static const char * const clks_init_on[] __initconst = {
- "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
-};
-
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
@@ -151,21 +147,25 @@ enum mx6q_clks {
esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
- mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4,
+ mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, clk_max
+ ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+ clk_max
};
static struct clk *clk[clk_max];
+static enum mx6q_clks const clks_init_on[] __initconst = {
+ mmdc_ch0_axi, rom,
+};
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
- struct clk *c;
int i, irq;
clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -198,6 +198,9 @@ int __init mx6q_clocks_init(void)
clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3);
clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3);
+ clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
+ clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
+
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
@@ -318,7 +321,7 @@ int __init mx6q_clocks_init(void)
clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
/* name parent_name reg shift */
- clk[apbh_dma] = imx_clk_gate2("apbh_dma", "ahb", base + 0x68, 4);
+ clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
@@ -357,6 +360,7 @@ int __init mx6q_clocks_init(void)
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
+ clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
@@ -365,6 +369,7 @@ int __init mx6q_clocks_init(void)
clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
@@ -387,12 +392,21 @@ int __init mx6q_clocks_init(void)
pr_err("i.MX6q clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
- clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi");
- clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi");
clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
clk_register_clkdev(clk[twd], NULL, "smp_twd");
- clk_register_clkdev(clk[usboh3], NULL, "usboh3");
+ clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
+ clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand");
+ clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand");
+ clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand");
+ clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand");
+ clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand");
+ clk_register_clkdev(clk[usboh3], NULL, "2184000.usb");
+ clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
+ clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
+ clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
+ clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy");
+ clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy");
clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
@@ -424,21 +438,14 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
- c = clk_get_sys(clks_init_on[i], NULL);
- if (IS_ERR(c)) {
- pr_err("%s: failed to get clk %s", __func__,
- clks_init_on[i]);
- return PTR_ERR(c);
- }
- clk_prepare_enable(c);
- }
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(NULL, base, irq);
+ mxc_timer_init(base, irq);
return 0;
}
diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
index 4685919deb6..0440379e362 100644
--- a/arch/arm/mach-imx/clk-pllv2.c
+++ b/arch/arm/mach-imx/clk-pllv2.c
@@ -74,30 +74,15 @@ struct clk_pllv2 {
void __iomem *base;
};
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+ u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
+ unsigned long dbl;
s64 temp;
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
-
- pllbase = pll->base;
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
@@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
return temp;
}
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
+ u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
+ void __iomem *pllbase;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+ return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+ u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
u32 reg;
- void __iomem *pllbase;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
-
- pllbase = pll->base;
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
@@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
pdf--;
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
+ temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate / 1000000);
mfn = (long)temp64;
+ reg = mfi << 4 | pdf;
+
+ *dp_op = reg;
+ *dp_mfd = mfd;
+ *dp_mfn = mfn;
+
+ return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ void __iomem *pllbase;
+ u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+ int ret;
+
+ pllbase = pll->base;
+
+
+ ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+ if (ret)
+ return ret;
+
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
+
+ __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
return 0;
}
@@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
- return rate;
+ u32 dp_op, dp_mfd, dp_mfn;
+
+ __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+ return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+ dp_op, dp_mfd, dp_mfn);
}
static int clk_pllv2_prepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h
index 5e11ba7daee..5e3f1f0f4ca 100644
--- a/arch/arm/mach-imx/crm-regs-imx5.h
+++ b/arch/arm/mach-imx/crm-regs-imx5.h
@@ -23,7 +23,7 @@
#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index 2628e0c474d..93ece55f75d 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -14,7 +14,7 @@ extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
-#define imx21_add_imx2_wdt(pdata) \
+#define imx21_add_imx2_wdt() \
imx_add_imx2_wdt(&imx21_imx2_wdt_data)
extern const struct imx_imx_fb_data imx21_imx_fb_data;
@@ -50,7 +50,7 @@ extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
-#define imx21_add_mxc_w1(pdata) \
+#define imx21_add_mxc_w1() \
imx_add_mxc_w1(&imx21_mxc_w1_data)
extern const struct imx_spi_imx_data imx21_cspi_data[];
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index efa0761c508..f8e03dd1f11 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -24,11 +24,11 @@ extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
-#define imx25_add_imxdi_rtc(pdata) \
+#define imx25_add_imxdi_rtc() \
imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
-#define imx25_add_imx2_wdt(pdata) \
+#define imx25_add_imx2_wdt() \
imx_add_imx2_wdt(&imx25_imx2_wdt_data)
extern const struct imx_imx_fb_data imx25_imx_fb_data;
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 28537a5d904..436c5720fe6 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -18,7 +18,7 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
-#define imx27_add_imx2_wdt(pdata) \
+#define imx27_add_imx2_wdt() \
imx_add_imx2_wdt(&imx27_imx2_wdt_data)
extern const struct imx_imx_fb_data imx27_imx_fb_data;
@@ -50,7 +50,7 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
#define imx27_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
-#define imx27_add_mx2_emmaprp(pdata) \
+#define imx27_add_mx2_emmaprp() \
imx_add_mx2_emmaprp(&imx27_mx2_camera_data)
extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
@@ -69,7 +69,7 @@ extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
-#define imx27_add_mxc_w1(pdata) \
+#define imx27_add_mxc_w1() \
imx_add_mxc_w1(&imx27_mxc_w1_data)
extern const struct imx_spi_imx_data imx27_cspi_data[];
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index 488e241a6db..8b2ceb45bb8 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -14,7 +14,7 @@ extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
-#define imx31_add_imx2_wdt(pdata) \
+#define imx31_add_imx2_wdt() \
imx_add_imx2_wdt(&imx31_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
@@ -42,8 +42,8 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
extern const struct imx_ipu_core_data imx31_ipu_core_data;
-#define imx31_add_ipu_core(pdata) \
- imx_add_ipu_core(&imx31_ipu_core_data, pdata)
+#define imx31_add_ipu_core() \
+ imx_add_ipu_core(&imx31_ipu_core_data)
#define imx31_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
#define imx31_add_mx3_sdc_fb(pdata) \
@@ -65,11 +65,11 @@ extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
-#define imx31_add_mxc_rtc(pdata) \
+#define imx31_add_mxc_rtc() \
imx_add_mxc_rtc(&imx31_mxc_rtc_data)
extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
-#define imx31_add_mxc_w1(pdata) \
+#define imx31_add_mxc_w1() \
imx_add_mxc_w1(&imx31_mxc_w1_data)
extern const struct imx_spi_imx_data imx31_cspi_data[];
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
index 7b99ef0bb50..c3e9f206ac2 100644
--- a/arch/arm/mach-imx/devices-imx35.h
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -24,7 +24,7 @@ extern const struct imx_flexcan_data imx35_flexcan_data[];
#define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata)
extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
-#define imx35_add_imx2_wdt(pdata) \
+#define imx35_add_imx2_wdt() \
imx_add_imx2_wdt(&imx35_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
@@ -50,8 +50,8 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
extern const struct imx_ipu_core_data imx35_ipu_core_data;
-#define imx35_add_ipu_core(pdata) \
- imx_add_ipu_core(&imx35_ipu_core_data, pdata)
+#define imx35_add_ipu_core() \
+ imx_add_ipu_core(&imx35_ipu_core_data)
#define imx35_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
#define imx35_add_mx3_sdc_fb(pdata) \
@@ -68,8 +68,12 @@ extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
#define imx35_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
+extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data;
+#define imx35_add_mxc_rtc() \
+ imx_add_mxc_rtc(&imx35_mxc_rtc_data)
+
extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
-#define imx35_add_mxc_w1(pdata) \
+#define imx35_add_mxc_w1() \
imx_add_mxc_w1(&imx35_mxc_w1_data)
extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
index af488bc0e22..9f171872519 100644
--- a/arch/arm/mach-imx/devices-imx51.h
+++ b/arch/arm/mach-imx/devices-imx51.h
@@ -55,7 +55,7 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[];
imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id, pdata) \
+#define imx51_add_imx2_wdt(id) \
imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
index 6e1e5d1f8c3..77e0db96c44 100644
--- a/arch/arm/mach-imx/devices-imx53.h
+++ b/arch/arm/mach-imx/devices-imx53.h
@@ -30,7 +30,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[];
imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id, pdata) \
+#define imx53_add_imx2_wdt(id) \
imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 865daf0b09e..05bb41d9972 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -24,14 +24,18 @@
#define MX25_OTG_SIC_SHIFT 29
#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
#define MX25_OTG_PM_BIT (1 << 24)
+#define MX25_OTG_PP_BIT (1 << 11)
+#define MX25_OTG_OCPOL_BIT (1 << 3)
#define MX25_H1_SIC_SHIFT 21
#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT (1 << 18)
#define MX25_H1_PM_BIT (1 << 8)
#define MX25_H1_IPPUE_UP_BIT (1 << 7)
#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX25_H1_TLL_BIT (1 << 5)
#define MX25_H1_USBTE_BIT (1 << 4)
+#define MX25_H1_OCPOL_BIT (1 << 2)
int mx25_initialize_usb_hw(int port, unsigned int flags)
{
@@ -41,21 +45,35 @@ int mx25_initialize_usb_hw(int port, unsigned int flags)
switch (port) {
case 0: /* OTG port */
- v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT);
+ v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
+ MX25_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_OTG_PM_BIT;
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_OTG_OCPOL_BIT;
+
break;
case 1: /* H1 port */
- v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT |
- MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
+ v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
+ MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
+ MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_H1_PM_BIT;
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_H1_OCPOL_BIT;
+
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX25_H1_TLL_BIT;
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 001ec3971f5..73574c30cf5 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -24,14 +24,18 @@
#define MX35_OTG_SIC_SHIFT 29
#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
#define MX35_OTG_PM_BIT (1 << 24)
+#define MX35_OTG_PP_BIT (1 << 11)
+#define MX35_OTG_OCPOL_BIT (1 << 3)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PP_BIT (1 << 18)
#define MX35_H1_PM_BIT (1 << 8)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
#define MX35_H1_USBTE_BIT (1 << 4)
+#define MX35_H1_OCPOL_BIT (1 << 2)
int mx35_initialize_usb_hw(int port, unsigned int flags)
{
@@ -41,21 +45,35 @@ int mx35_initialize_usb_hw(int port, unsigned int flags)
switch (port) {
case 0: /* OTG port */
- v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+ v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
+ MX35_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_OTG_OCPOL_BIT;
+
break;
case 1: /* H1 port */
- v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
- MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+ v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
+ MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
+ MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_H1_OCPOL_BIT;
+
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
index c17fa131728..a6a4afb0ad6 100644
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ b/arch/arm/mach-imx/ehci-imx5.c
@@ -28,11 +28,14 @@
#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
+#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
/* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */
#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */
#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
+#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */
/* USBH2CTRL */
#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
@@ -80,13 +83,21 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
if (flags & MXC_EHCI_INTERNAL_PHY) {
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
+ else
+ v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
- /* OC/USBPWR is not used */
- v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
- } else {
/* OC/USBPWR is used */
v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+ } else {
+ /* OC/USBPWR is not used */
+ v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
}
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
+ else
+ v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
@@ -95,9 +106,9 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
else
v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v |= MXC_OTG_UCTRL_OPM_BIT;
- else
v &= ~MXC_OTG_UCTRL_OPM_BIT;
+ else
+ v |= MXC_OTG_UCTRL_OPM_BIT;
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
}
break;
@@ -113,12 +124,16 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
}
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+ v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
else
v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_H1_OC_POL_BIT;
+ else
+ v &= ~MXC_H1_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
else
@@ -142,7 +157,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
}
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+ v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
else
v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index b46cab0ced5..fd3177f9e79 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -266,7 +266,7 @@ static struct spi_board_info __maybe_unused
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 1500000,
- .irq = IRQ_GPIOD(25),
+ /* irq number is run-time assigned */
.platform_data = &ads7846_config,
.mode = SPI_MODE_2,
},
@@ -329,6 +329,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
/* SPI_CS0 init */
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
+ eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
spi_register_board_info(eukrea_mbimx27_spi_board_info,
ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 557f6c48605..6e9dd12a696 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -95,10 +95,6 @@ static const struct fb_videomode fb_modedb[] = {
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CMO-QVGA",
.mode = fb_modedb,
@@ -287,7 +283,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
printk(KERN_ERR "error setting mbimxsd pads !\n");
imx35_add_imx_uart1(&uart_pdata);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 89493abd497..20ed2d56c1a 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -12,6 +12,7 @@
#include <linux/errno.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
@@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu)
return 1;
}
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ "mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %3\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
/*
* platform-specific code to shutdown a CPU
*
@@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu)
*/
void platform_cpu_die(unsigned int cpu)
{
- flush_cache_all();
+ cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
+ cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index eee0cc8d92a..e80d5235dac 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -10,7 +10,6 @@
*/
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
@@ -33,35 +32,8 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
{ /* sentinel */ }
};
-static int __init imx27_avic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx27_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
- NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx27_irq_match[] __initconst = {
- { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, },
- { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static void __init imx27_dt_init(void)
{
- of_irq_init(imx27_irq_match);
-
of_platform_populate(NULL, of_default_bus_match_table,
imx27_auxdata_lookup, NULL);
}
@@ -75,7 +47,7 @@ static struct sys_timer imx27_timer = {
.init = imx27_timer_init,
};
-static const char *imx27_dt_board_compat[] __initdata = {
+static const char * const imx27_dt_board_compat[] __initconst = {
"fsl,imx27",
NULL
};
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
new file mode 100644
index 00000000000..a68ba207b2b
--- /dev/null
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx31.h>
+
+static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
+ "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR,
+ "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR,
+ "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR,
+ "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR,
+ "imx21-uart.4", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx31_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx31_auxdata_lookup, NULL);
+}
+
+static void __init imx31_timer_init(void)
+{
+ mx31_clocks_init_dt();
+}
+
+static struct sys_timer imx31_timer = {
+ .init = imx31_timer_init,
+};
+
+static const char *imx31_dt_board_compat[] __initdata = {
+ "fsl,imx31",
+ NULL
+};
+
+DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
+ .timer = &imx31_timer,
+ .init_machine = imx31_dt_init,
+ .dt_compat = imx31_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 18e78dba429..d4067fe3635 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -11,7 +11,6 @@
*/
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
@@ -45,30 +44,6 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
{ /* sentinel */ }
};
-static int __init imx51_tzic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx51_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx51_irq_match[] __initconst = {
- { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
- { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
{ .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
{ /* sentinel */ }
@@ -80,8 +55,6 @@ static void __init imx51_dt_init(void)
const struct of_device_id *of_id;
void (*func)(void);
- of_irq_init(imx51_irq_match);
-
pinctrl_provide_dummies();
node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index eb04b6248e4..1b7a2fc3659 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -15,7 +15,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
@@ -52,30 +51,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
{ /* sentinel */ }
};
-static int __init imx53_tzic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx53_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx53_irq_match[] __initconst = {
- { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
- { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
{ .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
{ .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
@@ -103,8 +78,6 @@ static void __init imx53_dt_init(void)
const struct of_device_id *of_id;
void (*func)(void);
- of_irq_init(imx53_irq_match);
-
pinctrl_provide_dummies();
node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
@@ -147,6 +120,7 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
.handle_irq = imx53_handle_irq,
.timer = &imx53_timer,
.init_machine = imx53_dt_init,
+ .init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index f4a63ee9e21..7b99a79722b 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/dm9000.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
@@ -26,7 +27,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-mx1.h>
#include "devices-imx1.h"
@@ -87,8 +87,7 @@ static struct resource dm9000_resources[] = {
.end = MX1_CS4_PHYS + 0x00C00003,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_GPIOB(14),
- .end = IRQ_GPIOB(14),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -129,6 +128,8 @@ static void __init apf9328_init(void)
imx1_add_imx_i2c(&apf9328_i2c_data);
+ dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
+ dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index c650145d164..2c6ab3273f9 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -367,10 +367,6 @@ static const struct fb_videomode fb_modedb[] = {
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CRT-VGA",
.mode = fb_modedb,
@@ -408,7 +404,8 @@ static int armadillo5x0_sdhc1_init(struct device *dev,
gpio_direction_input(gpio_wp);
/* When supported the trigger type have to be BOTH */
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
+ detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
@@ -429,7 +426,7 @@ err_gpio_free:
static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data);
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
}
@@ -450,8 +447,7 @@ static struct resource armadillo5x0_smc911x_resources[] = {
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -498,6 +494,10 @@ static void __init armadillo5x0_init(void)
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ armadillo5x0_smc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+ armadillo5x0_smc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
imx_add_gpio_keys(&armadillo5x0_button_data);
imx31_add_imx_i2c1(NULL);
@@ -513,7 +513,7 @@ static void __init armadillo5x0_init(void)
imx31_add_mxc_mmc(0, &sdhc_pdata);
/* Register FB */
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* Register NOR Flash */
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index d085aea0870..2bb9e18d9ee 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -169,28 +169,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
- .irq = IRQ_GPIOB(23),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
- .irq = IRQ_GPIOB(22),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
- .irq = IRQ_GPIOB(27),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
- .irq = IRQ_GPIOB(30),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -233,18 +233,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx27_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
@@ -266,8 +266,8 @@ static void __init eukrea_cpuimx27_init(void)
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_imx2_wdt(NULL);
- imx27_add_mxc_w1(NULL);
+ imx27_add_imx2_wdt();
+ imx27_add_mxc_w1();
#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
/* SDHC2 can be used for Wifi */
@@ -279,6 +279,10 @@ static void __init eukrea_cpuimx27_init(void)
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
+ serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
+ serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
+ serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
platform_device_register(&serial_device);
#endif
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index c515f8ede1a..d49b0ec6bde 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -70,9 +70,8 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
- .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
+ /* irq number is run-time assigned */
},
};
@@ -142,18 +141,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx35_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
@@ -168,11 +167,12 @@ static void __init eukrea_cpuimx35_init(void)
ARRAY_SIZE(eukrea_cpuimx35_pads));
imx35_add_fec(NULL);
- imx35_add_imx2_wdt(NULL);
+ imx35_add_imx2_wdt();
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
+ eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO);
i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index ac50f1671e3..b87cc49ab1e 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x49),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
},
};
@@ -218,18 +217,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.portsc = MXC_EHCI_MODE_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx51sd_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
@@ -259,7 +258,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = {
.mode = SPI_MODE_0,
.chip_select = 0,
.platform_data = &mcp251x_info,
- .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
+ /* irq number is run-time assigned */
},
};
@@ -293,7 +292,7 @@ static void __init eukrea_cpuimx51sd_init(void)
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
- imx51_add_imx2_wdt(0, NULL);
+ imx51_add_imx2_wdt(0);
gpio_request(ETH_RST, "eth_rst");
gpio_set_value(ETH_RST, 1);
@@ -310,6 +309,7 @@ static void __init eukrea_cpuimx51sd_init(void)
msleep(20);
gpio_set_value(CAN_RST, 1);
imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
+ cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO);
spi_register_board_info(cpuimx51sd_spi_device,
ARRAY_SIZE(cpuimx51sd_spi_device));
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index d1e04e676e3..017bbb70ea4 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -109,18 +109,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx25_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
@@ -134,9 +134,9 @@ static void __init eukrea_cpuimx25_init(void)
imx25_add_imx_uart0(&uart_pdata);
imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
- imx25_add_imxdi_rtc(NULL);
+ imx25_add_imxdi_rtc();
imx25_add_fec(&mx25_fec_pdata);
- imx25_add_imx2_wdt(NULL);
+ imx25_add_imx2_wdt();
i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index dff82eb57cd..f264ddddd47 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,8 +38,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
@@ -47,7 +48,7 @@
#define TVP5150_RSTN (GPIO_PORTC + 18)
#define TVP5150_PWDN (GPIO_PORTC + 19)
#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
-#define SDHC1_IRQ IRQ_GPIOB(25)
+#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31)
#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30)
@@ -116,6 +117,8 @@ static const int visstrim_m10_pins[] __initconst = {
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
+ TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
+ TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
@@ -147,6 +150,24 @@ static struct gpio visstrim_m10_version_gpios[] = {
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
+static const struct gpio visstrim_m10_gpios[] __initconst = {
+ {
+ .gpio = TVP5150_RSTN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+ .label = "tvp5150_rstn",
+ },
+ {
+ .gpio = TVP5150_PWDN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "tvp5150_pwdn",
+ },
+ {
+ .gpio = OTG_PHY_CS_GPIO,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "usbotg_cs",
+ },
+};
+
/* Camera */
static int visstrim_camera_power(struct device *dev, int on)
{
@@ -190,13 +211,6 @@ static void __init visstrim_camera_init(void)
struct platform_device *pdev;
int dma;
- /* Initialize tvp5150 gpios */
- mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
- gpio_set_value(TVP5150_RSTN, 1);
- gpio_set_value(TVP5150_PWDN, 0);
- ndelay(1);
-
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
@@ -294,14 +308,14 @@ static int visstrim_m10_sdhc1_init(struct device *dev,
{
int ret;
- ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
- "mmc-detect", data);
+ ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
return ret;
}
static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(SDHC1_IRQ, data);
+ free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data);
}
static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
@@ -377,10 +391,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
@@ -435,6 +445,11 @@ static void __init visstrim_m10_board_init(void)
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
+ ret = gpio_request_array(visstrim_m10_gpios,
+ ARRAY_SIZE(visstrim_m10_gpios));
+ if (ret)
+ pr_err("Failed to request gpios (%d)\n", ret);
+
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index c9d350c5dcc..7381387a890 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -57,7 +57,7 @@ static void __init mx27ipcam_init(void)
imx27_add_imx_uart0(NULL);
imx27_add_fec(NULL);
- imx27_add_imx2_wdt(NULL);
+ imx27_add_imx2_wdt();
}
static void __init mx27ipcam_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index b47e98b7d53..5ec0608f2a7 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -12,11 +12,12 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/cpuidle.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -24,6 +25,8 @@
#include <linux/pinctrl/machine.h>
#include <linux/phy.h>
#include <linux/micrel_phy.h>
+#include <linux/mfd/anatop.h>
+#include <asm/cpuidle.h>
#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
@@ -31,8 +34,10 @@
#include <asm/mach/time.h>
#include <asm/system_misc.h>
#include <mach/common.h>
+#include <mach/cpuidle.h>
#include <mach/hardware.h>
+
void imx6q_restart(char mode, const char *cmd)
{
struct device_node *np;
@@ -113,6 +118,45 @@ static void __init imx6q_sabrelite_init(void)
imx6q_sabrelite_cko1_setup();
}
+static void __init imx6q_usb_init(void)
+{
+ struct device_node *np;
+ struct platform_device *pdev = NULL;
+ struct anatop *adata = NULL;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ if (np)
+ pdev = of_find_device_by_node(np);
+ if (pdev)
+ adata = platform_get_drvdata(pdev);
+ if (!adata) {
+ if (np)
+ of_node_put(np);
+ return;
+ }
+
+#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0
+#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210
+
+#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000
+#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000
+
+ /*
+ * The external charger detector needs to be disabled,
+ * or the signal at DP will be poor
+ */
+ anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B
+ | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
+ ~0);
+ anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT,
+ BM_ANADIG_USB_CHRG_DETECT_EN_B |
+ BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
+ ~0);
+
+ of_node_put(np);
+}
+
static void __init imx6q_init_machine(void)
{
/*
@@ -127,6 +171,20 @@ static void __init imx6q_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6q_pm_init();
+ imx6q_usb_init();
+}
+
+static struct cpuidle_driver imx6q_cpuidle_driver = {
+ .name = "imx6q_cpuidle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .state_count = 1,
+};
+
+static void __init imx6q_init_late(void)
+{
+ imx_cpuidle_init(&imx6q_cpuidle_driver);
}
static void __init imx6q_map_io(void)
@@ -136,21 +194,8 @@ static void __init imx6q_map_io(void)
imx6q_clock_map_io();
}
-static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
- NULL);
-
- return 0;
-}
-
static const struct of_device_id imx6q_irq_match[] __initconst = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
{ /* sentinel */ }
};
@@ -186,6 +231,7 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
.handle_irq = imx6q_handle_irq,
.timer = &imx6q_timer,
.init_machine = imx6q_init_machine,
+ .init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
.restart = imx6q_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 15a26e90826..5d08533ab2c 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ /* irq number is run-time assigned */
.irqflags = IRQ_TYPE_EDGE_RISING,
.uartclk = 14745600,
.regshift = 0,
@@ -91,8 +91,7 @@ static struct resource serial8250_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -125,6 +124,13 @@ static int __init kzm_init_ext_uart(void)
tmp |= 0x2;
__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+ serial_platform_data[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+ serial8250_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+ serial8250_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
return platform_device_register(&serial_device);
}
#else
@@ -152,8 +158,7 @@ static struct resource kzm_smsc9118_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -184,6 +189,11 @@ static int __init kzm_init_smsc9118(void)
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ kzm_smsc9118_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+ kzm_smsc9118_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
return platform_device_register(&kzm_smsc9118_device);
}
#else
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 7274e792813..667f359a2e8 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -26,7 +26,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx1.h>
-#include <mach/irqs.h>
#include "devices-imx1.h"
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d14bbe949a4..ed22e3fe6ec 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -32,13 +32,13 @@
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
-#define MX21ADS_MMIO_SIZE SZ_16M
+#define MX21ADS_MMIO_SIZE 0xc00000
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
#define MX21ADS_CS8900A_MMIO_SIZE 0x200000
-#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
@@ -159,9 +159,10 @@ static struct platform_device mx21ads_nor_mtd_device = {
.resource = &mx21ads_flash_resource,
};
-static const struct resource mx21ads_cs8900_resources[] __initconst = {
+static struct resource mx21ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
- DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ),
+ /* irq number is run-time assigned */
+ DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
@@ -241,13 +242,13 @@ static int mx21ads_sdhc_get_ro(struct device *dev)
static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOD(25), detect_irq,
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
IRQF_TRIGGER_FALLING, "mmc-detect", data);
}
static void mx21ads_sdhc_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOD(25), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
}
static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
@@ -304,6 +305,11 @@ static void __init mx21ads_board_init(void)
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ mx21ads_cs8900_resources[1].start =
+ gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
+ mx21ads_cs8900_resources[1].end =
+ gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
platform_device_register_full(&mx21ads_cs8900_devinfo);
}
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index f26734298aa..ce247fd1269 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -237,9 +237,9 @@ static void __init mx25pdk_init(void)
imx25_add_fsl_usb2_udc(&otg_device_pdata);
imx25_add_mxc_ehci_hs(&usbh2_pdata);
imx25_add_mxc_nand(&mx25pdk_nand_board_info);
- imx25_add_imxdi_rtc(NULL);
+ imx25_add_imxdi_rtc();
imx25_add_imx_fb(&mx25pdk_fb_pdata);
- imx25_add_imx2_wdt(NULL);
+ imx25_add_imx2_wdt();
mx25pdk_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index c6d385c5225..58c24c1a7ab 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -40,7 +40,6 @@
#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/ulpi.h>
-#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
#include "devices-imx27.h"
@@ -48,7 +47,6 @@
#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
#define SPI2_SS0 IMX_GPIO_NR(4, 21)
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28))
#define PMIC_INT IMX_GPIO_NR(3, 14)
#define SPI1_SS0 IMX_GPIO_NR(4, 28)
#define SD1_CD IMX_GPIO_NR(2, 26)
@@ -241,18 +239,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init mx27_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", mx27_3ds_otg_mode);
@@ -445,7 +443,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
- .irq = IMX_GPIO_TO_IRQ(PMIC_INT),
+ /* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -480,7 +478,7 @@ static void __init mx27pdk_init(void)
imx27_add_fec(NULL);
imx27_add_imx_keypad(&mx27_3ds_keymap_data);
imx27_add_mxc_mmc(0, &sdhc1_pdata);
- imx27_add_imx2_wdt(NULL);
+ imx27_add_imx2_wdt();
otg_phy_init();
if (otg_mode_host) {
@@ -496,10 +494,11 @@ static void __init mx27pdk_init(void)
imx27_add_spi_imx1(&spi2_pdata);
imx27_add_spi_imx0(&spi1_pdata);
+ mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
- if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 0228d2e07fe..7dc59bac0e5 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -246,25 +246,25 @@ static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
- "sdhc1-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
+ IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
- "sdhc2-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
+ IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
}
static void mx27ads_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOE(21), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
}
static void mx27ads_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOB(7), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
@@ -310,7 +310,7 @@ static void __init mx27ads_board_init(void)
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_mxc_w1(NULL);
+ imx27_add_mxc_w1();
}
static void __init mx27ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 4eafdf275ea..8915f937b7d 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -44,9 +44,6 @@
#include "devices-imx31.h"
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
@@ -277,10 +274,6 @@ static const struct fb_videomode fb_modedb[] = {
},
};
-static struct ipu_platform_data mx3_ipu_data = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Epson-VGA",
.mode = fb_modedb,
@@ -317,7 +310,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev,
return ret;
}
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
detect_irq, IRQF_DISABLED |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
@@ -336,7 +329,7 @@ gpio_free:
static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
gpio_free_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
}
@@ -539,7 +532,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
.bus_num = 1,
.chip_select = 1, /* SS2 */
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -671,18 +664,18 @@ static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init mx31_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", mx31_3ds_otg_mode);
@@ -714,6 +707,7 @@ static void __init mx31_3ds_init(void)
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
+ mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
@@ -736,15 +730,15 @@ static void __init mx31_3ds_init(void)
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&usbotg_pdata);
- if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
printk(KERN_WARNING "Init of the debug board failed, all "
"devices on the debug board are unusable.\n");
- imx31_add_imx2_wdt(NULL);
+ imx31_add_imx2_wdt();
imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
imx31_add_mxc_mmc(0, &sdhc1_pdata);
imx31_add_spi_imx0(&spi0_pdata);
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* CSI */
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4518e544822..d37f4809c55 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -21,6 +21,7 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -62,20 +63,18 @@
#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_XUART_INTA 10
+#define EXPIO_INT_XUART_INTB 11
#define MXC_MAX_EXP_IO_LINES 16
/* CS8900 */
-#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_ENET_INT 8
#define CS4_CS8900_MMIO_START 0x20000
+static struct irq_domain *domain;
+
/*
* The serial port definition structure.
*/
@@ -83,7 +82,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
- .irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
@@ -91,7 +89,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
- .irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
@@ -108,9 +105,9 @@ static struct platform_device serial_device = {
},
};
-static const struct resource mx31ads_cs8900_resources[] __initconst = {
+static struct resource mx31ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
- DEFINE_RES_IRQ(EXPIO_INT_ENET_INT),
+ DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
@@ -122,11 +119,19 @@ static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
static int __init mxc_init_extuart(void)
{
+ serial_platform_data[0].irq = irq_find_mapping(domain,
+ EXPIO_INT_XUART_INTA);
+ serial_platform_data[1].irq = irq_find_mapping(domain,
+ EXPIO_INT_XUART_INTB);
return platform_device_register(&serial_device);
}
static void __init mxc_init_ext_ethernet(void)
{
+ mx31ads_cs8900_resources[1].start =
+ irq_find_mapping(domain, EXPIO_INT_ENET_INT);
+ mx31ads_cs8900_resources[1].end =
+ irq_find_mapping(domain, EXPIO_INT_ENET_INT);
platform_device_register_full(
(struct platform_device_info *)&mx31ads_cs8900_devinfo);
}
@@ -157,12 +162,12 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
imr_val = __raw_readw(PBC_INTMASK_SET_REG);
int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
- expio_irq = MXC_EXP_IO_BASE;
+ expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
- generic_handle_irq(expio_irq);
+ generic_handle_irq(irq_find_mapping(domain, expio_irq));
}
}
@@ -172,7 +177,7 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
*/
static void expio_mask_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* mask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
__raw_readw(PBC_INTMASK_CLEAR_REG);
@@ -184,7 +189,7 @@ static void expio_mask_irq(struct irq_data *d)
*/
static void expio_ack_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* clear the interrupt status */
__raw_writew(1 << expio, PBC_INTSTATUS_REG);
}
@@ -195,7 +200,7 @@ static void expio_ack_irq(struct irq_data *d)
*/
static void expio_unmask_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* unmask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
}
@@ -209,7 +214,8 @@ static struct irq_chip expio_irq_chip = {
static void __init mx31ads_init_expio(void)
{
- int i;
+ int irq_base;
+ int i, irq;
printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
@@ -221,13 +227,21 @@ static void __init mx31ads_init_expio(void)
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
- for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
- i++) {
+
+ irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
- irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
- irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+ irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4));
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_chained_handler(irq, mx31ads_expio_irq_handler);
}
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -479,7 +493,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
- .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
@@ -488,13 +501,17 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
{
I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &mx31_wm8350_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
},
#endif
};
static void __init mxc_init_i2c(void)
{
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+ mx31ads_i2c1_devices[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+#endif
i2c_register_board_info(1, mx31ads_i2c1_devices,
ARRAY_SIZE(mx31ads_i2c1_devices));
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 83714b0cc29..34b9bf075da 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -65,8 +65,7 @@ static struct resource smsc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@@ -233,7 +232,7 @@ static struct spi_board_info mc13783_dev __initdata = {
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
};
static struct platform_device *devices[] __initdata = {
@@ -285,10 +284,15 @@ static void __init mx31lilly_board_init(void)
imx31_add_spi_imx0(&spi0_pdata);
imx31_add_spi_imx1(&spi1_pdata);
+ mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_dev, 1);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ smsc91x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+ smsc91x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
/* USB */
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 686c6058798..c8785b39eae 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -43,7 +43,6 @@
#include <mach/common.h>
#include <mach/board-mx31lite.h>
#include <mach/iomux-mx3.h>
-#include <mach/irqs.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -83,8 +82,7 @@ static struct resource smsc911x_resources[] = {
.end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
- .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -124,7 +122,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
};
/*
@@ -258,6 +256,7 @@ static void __init mx31lite_init(void)
imx31_add_mxc_nand(&mx31lite_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
+ mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_spi_dev, 1);
/* USB */
@@ -274,6 +273,10 @@ static void __init mx31lite_init(void)
pr_warning("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ smsc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ smsc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
platform_device_register(&smsc911x_device);
}
}
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 016791f038b..d46290b288e 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -303,7 +303,7 @@ static struct imx_ssi_platform_data moboard_ssi_pdata = {
static struct spi_board_info moboard_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 1,
.chip_select = 0,
@@ -473,10 +473,6 @@ static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
.leds = mx31moboard_leds,
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
};
@@ -494,7 +490,7 @@ static int __init mx31moboard_init_cam(void)
int dma, ret = -ENOMEM;
struct platform_device *pdev;
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
pdev = imx31_alloc_mx3_camera(&camera_pdata);
if (IS_ERR(pdev))
@@ -544,7 +540,7 @@ static void __init mx31moboard_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
gpio_led_register_device(-1, &mx31moboard_led_pdata);
- imx31_add_imx2_wdt(NULL);
+ imx31_add_imx2_wdt();
imx31_add_imx_uart0(&uart0_pdata);
imx31_add_imx_uart4(&uart4_pdata);
@@ -557,6 +553,8 @@ static void __init mx31moboard_init(void)
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+ moboard_spi_board_info[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(moboard_spi_board_info,
ARRAY_SIZE(moboard_spi_board_info));
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 28aa19476de..504983c68aa 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -46,7 +46,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
#include <video/platform_lcd.h>
@@ -80,10 +79,6 @@ static const struct fb_videomode fb_modedb[] = {
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Ceramate-CLAA070VC01",
.mode = fb_modedb,
@@ -136,8 +131,6 @@ static struct platform_device mx35_3ds_lcd = {
.dev.platform_data = &mx35_3ds_lcd_data,
};
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1))
-
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -297,10 +290,6 @@ err:
return ret;
}
-static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct i2c_board_info mx35_3ds_i2c_camera = {
I2C_BOARD_INFO("ov2640", 0x30),
};
@@ -492,7 +481,7 @@ static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &mx35_3ds_mc13892_data,
- .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+ /* irq number is run-time assigned */
};
static void __init imx35_3ds_init_mc13892(void)
@@ -504,6 +493,7 @@ static void __init imx35_3ds_init_mc13892(void)
return;
}
+ mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
}
@@ -540,18 +530,18 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init mx35_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", mx35_3ds_otg_mode);
@@ -571,7 +561,8 @@ static void __init mx35_3ds_init(void)
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
imx35_add_fec(NULL);
- imx35_add_imx2_wdt(NULL);
+ imx35_add_imx2_wdt();
+ imx35_add_mxc_rtc();
platform_add_devices(devices, ARRAY_SIZE(devices));
imx35_add_imx_uart0(&uart_pdata);
@@ -587,7 +578,7 @@ static void __init mx35_3ds_init(void)
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
- if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
pr_warn("Init of the debugboard failed, all "
"devices on the debugboard are unusable.\n");
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
@@ -595,7 +586,7 @@ static void __init mx35_3ds_init(void)
i2c_register_board_info(
0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
- imx35_add_ipu_core(&mx35_3ds_ipu_data);
+ imx35_add_ipu_core();
platform_device_register(&mx35_3ds_ov2640);
imx35_3ds_init_camera();
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
index 3c5b163923f..9ee84a4af63 100644
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ b/arch/arm/mach-imx/mach-mx51_3ds.c
@@ -26,7 +26,6 @@
#include "devices-imx51.h"
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6))
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
static iomux_v3_cfg_t mx51_3ds_pads[] = {
@@ -148,13 +147,13 @@ static void __init mx51_3ds_init(void)
spi_register_board_info(mx51_3ds_spi_nor_device,
ARRAY_SIZE(mx51_3ds_spi_nor_device));
- if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6)))
printk(KERN_WARNING "Init of the debugboard failed, all "
"devices on the board are unusable.\n");
imx51_add_sdhci_esdhc_imx(0, NULL);
imx51_add_imx_keypad(&mx51_3ds_map_data);
- imx51_add_imx2_wdt(0, NULL);
+ imx51_add_imx2_wdt(0);
}
static void __init mx51_3ds_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index dde397014d4..7b31cbde877 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -307,18 +307,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.portsc = MXC_EHCI_MODE_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init babbage_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", babbage_otg_mode);
@@ -411,7 +411,7 @@ static void __init mx51_babbage_init(void)
spi_register_board_info(mx51_babbage_spi_board_info,
ARRAY_SIZE(mx51_babbage_spi_board_info));
imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
- imx51_add_imx2_wdt(0, NULL);
+ imx51_add_imx2_wdt(0);
}
static void __init mx51_babbage_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index 05641980dc5..6c28e65f424 100644
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -135,8 +135,7 @@ static struct resource ard_smsc911x_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
- .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -240,10 +239,12 @@ static void __init mx53_ard_board_init(void)
imx53_ard_common_init();
mx53_ard_io_init();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
+ ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
- imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx2_wdt(0);
imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
imx_add_gpio_keys(&ard_button_data);
@@ -266,5 +267,6 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_ard_timer,
.init_machine = mx53_ard_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
index 5a72188b9cd..09fe2197b49 100644
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ b/arch/arm/mach-imx/mach-mx53_evk.c
@@ -154,7 +154,7 @@ static void __init mx53_evk_board_init(void)
spi_register_board_info(mx53_evk_spi_board_info,
ARRAY_SIZE(mx53_evk_spi_board_info));
imx53_add_ecspi(0, &mx53_evk_spi_data);
- imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx2_wdt(0);
gpio_led_register_device(-1, &mx53evk_leds_data);
}
@@ -174,5 +174,6 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_evk_timer,
.init_machine = mx53_evk_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
index 37f67cac15a..8abe23c1d3c 100644
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ b/arch/arm/mach-imx/mach-mx53_loco.c
@@ -283,7 +283,7 @@ static void __init mx53_loco_board_init(void)
imx53_add_imx_uart(0, NULL);
mx53_loco_fec_reset();
imx53_add_fec(&mx53_loco_fec_data);
- imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx2_wdt(0);
ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
if (ret)
@@ -316,5 +316,6 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_loco_timer,
.init_machine = mx53_loco_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
index 8e972c5c3e1..b15d6a6d3b6 100644
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ b/arch/arm/mach-imx/mach-mx53_smd.c
@@ -138,7 +138,7 @@ static void __init mx53_smd_board_init(void)
mx53_smd_init_uart();
mx53_smd_fec_reset();
imx53_add_fec(&mx53_smd_fec_data);
- imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx2_wdt(0);
imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(1, NULL);
@@ -163,5 +163,6 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_smd_timer,
.init_machine = mx53_smd_board_init,
+ .init_late = imx53_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 8b3d3f07d89..0bf6d30aa32 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -213,13 +213,13 @@ static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
- "sdhc1-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq,
+ IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data);
}
static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOF(8), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 541152e450c..de8516b7d69 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
@@ -245,7 +244,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
{
int ret;
- ret = request_irq(IRQ_GPIOC(29), detect_irq,
+ ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
@@ -257,7 +256,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
static void pca100_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
}
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
@@ -298,18 +297,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init pca100_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", pca100_otg_mode);
@@ -408,8 +407,8 @@ static void __init pca100_init(void)
imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
- imx27_add_imx2_wdt(NULL);
- imx27_add_mxc_w1(NULL);
+ imx27_add_imx2_wdt();
+ imx27_add_mxc_w1();
}
static void __init pca100_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 0a40004154f..e3c45130fb3 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -225,8 +225,7 @@ static struct resource smsc911x_resources[] = {
.end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -371,7 +370,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
gpio_direction_input(SDHC1_GPIO_WP);
#endif
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
if (ret)
@@ -391,7 +390,7 @@ err_gpio_free:
static void pcm970_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data);
gpio_free(SDHC1_GPIO_DET);
gpio_free(SDHC1_GPIO_WP);
}
@@ -442,10 +441,6 @@ static struct platform_device *devices[] __initdata = {
&pcm037_mt9v022,
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static const struct fb_videomode fb_modedb[] = {
{
/* 240x320 @ 60 Hz Sharp */
@@ -511,8 +506,7 @@ static struct resource pcm970_sja1000_resources[] = {
.end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
- .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -557,18 +551,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init pcm037_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", pcm037_otg_mode);
@@ -619,13 +613,13 @@ static void __init pcm037_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
- imx31_add_imx2_wdt(NULL);
+ imx31_add_imx2_wdt();
imx31_add_imx_uart0(&uart_pdata);
/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
imx31_add_imx_uart1(&uart_pdata);
imx31_add_imx_uart2(&uart_pdata);
- imx31_add_mxc_w1(NULL);
+ imx31_add_mxc_w1();
/* LAN9217 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
@@ -633,6 +627,10 @@ static void __init pcm037_init(void)
pr_warning("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ smsc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ smsc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
platform_device_register(&pcm037_eth);
}
@@ -646,7 +644,7 @@ static void __init pcm037_init(void)
imx31_add_mxc_nand(&pcm037_nand_board_info);
imx31_add_mxc_mmc(0, &sdhc_pdata);
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* CSI */
@@ -659,6 +657,10 @@ static void __init pcm037_init(void)
pcm037_init_camera();
+ pcm970_sja1000_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
+ pcm970_sja1000_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
platform_device_register(&pcm970_sja1000);
if (otg_mode_host) {
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 2f3debe2a11..95f49d936fd 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -27,6 +27,7 @@
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -274,7 +275,7 @@ static struct mc13xxx_platform_data pcm038_pmic = {
static struct spi_board_info pcm038_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
- .irq = IRQ_GPIOB(23),
+ /* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 0,
.chip_select = 0,
@@ -325,6 +326,7 @@ static void __init pcm038_init(void)
mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
imx27_add_spi_imx0(&pcm038_spi0_data);
+ pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23));
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
@@ -332,8 +334,8 @@ static void __init pcm038_init(void)
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_imx2_wdt(NULL);
- imx27_add_mxc_w1(NULL);
+ imx27_add_imx2_wdt();
+ imx27_add_mxc_w1();
#ifdef CONFIG_MACH_PCM970_BASEBOARD
pcm970_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 73585f55cca..e4bd4387e34 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -76,10 +76,6 @@ static const struct fb_videomode fb_modedb[] = {
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Sharp-LQ035Q7",
.mode = fb_modedb,
@@ -330,18 +326,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.phy_mode = FSL_USB2_PHY_UTMI,
};
-static int otg_mode_host;
+static bool otg_mode_host __initdata;
static int __init pcm043_otg_mode(char *options)
{
if (!strcmp(options, "host"))
- otg_mode_host = 1;
+ otg_mode_host = true;
else if (!strcmp(options, "device"))
- otg_mode_host = 0;
+ otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
- return 0;
+ return 1;
}
__setup("otg_mode=", pcm043_otg_mode);
@@ -363,7 +359,7 @@ static void __init pcm043_init(void)
imx35_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
- imx35_add_imx2_wdt(NULL);
+ imx35_add_imx2_wdt();
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&pcm037_nand_board_info);
@@ -376,7 +372,7 @@ static void __init pcm043_init(void)
imx35_add_imx_i2c0(&pcm043_i2c0_data);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
if (otg_mode_host) {
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 260621055b6..fb25fbd3122 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -22,7 +22,6 @@
#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -51,8 +50,6 @@
(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
#define QONG_DNET_SIZE 0x00001000
-#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
-
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -78,8 +75,7 @@ static struct resource dnet_resources[] = {
.end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = QONG_FPGA_IRQ,
- .end = QONG_FPGA_IRQ,
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -95,6 +91,10 @@ static int __init qong_init_dnet(void)
{
int ret;
+ dnet_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
+ dnet_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
ret = platform_device_register(&dnet_device);
return ret;
}
@@ -252,7 +252,7 @@ static void __init qong_init(void)
mxc_init_imx_uart();
qong_init_nor_mtd();
qong_init_fpga();
- imx31_add_imx2_wdt(NULL);
+ imx31_add_imx2_wdt();
}
static void __init qong_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index cb9ceae2f64..67ff38e9a3c 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -14,6 +14,7 @@
#include <linux/mtd/physmap.h>
#include <linux/interrupt.h>
#include <linux/dm9000.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -21,7 +22,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-mx1.h>
#include "devices-imx1.h"
@@ -78,8 +78,7 @@ static struct resource dm9000x_resources[] = {
.end = MX1_CS5_PHYS + 5,
.flags = IORESOURCE_MEM, /* data access */
}, {
- .start = IRQ_GPIOC(3),
- .end = IRQ_GPIOC(3),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -123,6 +122,8 @@ static void __init scb9328_init(void)
imx1_add_imx_uart0(&uart_pdata);
printk(KERN_INFO"Scb9328: Adding devices\n");
+ dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3));
+ dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index add8c69c6c1..39eb7960e2a 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -31,7 +31,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
@@ -87,10 +86,6 @@ static const struct fb_videomode fb_modedb[] = {
}
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "PT0708048",
.mode = fb_modedb,
@@ -162,7 +157,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
}, {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &vpr200_pmic,
- .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+ /* irq number is run-time assigned */
}
};
@@ -272,7 +267,7 @@ static void __init vpr200_board_init(void)
mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
imx35_add_fec(NULL);
- imx35_add_imx2_wdt(NULL);
+ imx35_add_imx2_wdt();
imx_add_gpio_keys(&vpr200_gpio_keys_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -290,7 +285,7 @@ static void __init vpr200_board_init(void)
imx35_add_imx_uart0(NULL);
imx35_add_imx_uart2(NULL);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_fsl_usb2_udc(&otg_device_pdata);
@@ -299,6 +294,7 @@ static void __init vpr200_board_init(void)
imx35_add_mxc_nand(&vpr200_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
+ vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, vpr200_i2c_devices,
ARRAY_SIZE(vpr200_i2c_devices));
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index fcafd3dafb8..6d60d51868b 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -24,7 +24,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
static struct map_desc imx_io_desc[] __initdata = {
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 5f43905e529..d056dad0940 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -26,7 +26,6 @@
#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
/* MX21 memory map definition */
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 6ff37140a4f..f3f5c6542ab 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -29,7 +29,6 @@
#include <mach/hardware.h>
#include <mach/mx25.h>
#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
/*
* This table defines static virtual address mappings for I/O regions.
@@ -90,11 +89,11 @@ static const struct resource imx25_audmux_res[] __initconst = {
void __init imx25_soc_init(void)
{
- /* i.mx25 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
- mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+ /* i.mx25 has the i.mx35 type gpio */
+ mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
+ mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
+ mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
+ mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
pinctrl_provide_dummies();
/* i.mx25 has the i.mx35 type sdma */
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 25662558e01..e7e24afc45e 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -26,7 +26,6 @@
#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
/* MX27 memory map definition */
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 967ed5b35a4..9d2c843bde0 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -30,7 +30,6 @@
#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
#include "crmregs-imx3.h"
@@ -86,6 +85,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
void __init imx3_init_l2x0(void)
{
+#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
@@ -115,6 +115,7 @@ void __init imx3_init_l2x0(void)
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+#endif
}
#ifdef CONFIG_SOC_IMX31
@@ -179,6 +180,8 @@ void __init imx31_soc_init(void)
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+ pinctrl_provide_dummies();
+
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
@@ -269,10 +272,9 @@ void __init imx35_soc_init(void)
imx3_init_l2x0();
- /* i.mx35 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+ mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+ mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+ mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
pinctrl_provide_dummies();
if (to_version == 1) {
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index feeee17da96..52d8f534be1 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -16,7 +16,6 @@
#include <linux/clk.h>
#include <linux/pinctrl/machine.h>
-#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -24,24 +23,6 @@
#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
-static struct clk *gpc_dvfs_clk;
-
-static void imx5_idle(void)
-{
- /* gpc clock is needed for SRPG */
- if (gpc_dvfs_clk == NULL) {
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (IS_ERR(gpc_dvfs_clk))
- return;
- clk_prepare(gpc_dvfs_clk);
- }
- clk_enable(gpc_dvfs_clk);
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (!tzic_enable_wake())
- cpu_do_idle();
- clk_disable(gpc_dvfs_clk);
-}
-
/*
* Define the MX50 memory map.
*/
@@ -105,7 +86,6 @@ void __init imx51_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- arm_pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
@@ -181,13 +161,13 @@ static const struct resource imx53_audmux_res[] __initconst = {
void __init imx50_soc_init(void)
{
- /* i.mx50 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
- mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
- mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+ /* i.mx50 has the i.mx35 type gpio */
+ mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+ mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+ mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
/* i.mx50 has the i.mx31 type audmux */
platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
@@ -196,11 +176,13 @@ void __init imx50_soc_init(void)
void __init imx51_soc_init(void)
{
- /* i.mx51 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
+ /* i.mx51 has the i.mx35 type gpio */
+ mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
+
+ pinctrl_provide_dummies();
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
@@ -216,14 +198,14 @@ void __init imx51_soc_init(void)
void __init imx53_soc_init(void)
{
- /* i.mx53 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
- mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
- mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
- mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
+ /* i.mx53 has the i.mx35 type gpio */
+ mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
+ mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
+ mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
+ mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
pinctrl_provide_dummies();
/* i.mx53 has the i.mx35 type sdma */
@@ -241,4 +223,10 @@ void __init imx53_soc_init(void)
void __init imx51_init_late(void)
{
mx51_neon_fixup();
+ imx51_pm_init();
+}
+
+void __init imx53_init_late(void)
+{
+ imx53_pm_init();
}
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index 7d26f766a4e..29e890f9205 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -130,7 +130,8 @@ static int mxc_mmc1_init(struct device *dev,
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
+ detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
@@ -151,7 +152,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data);
}
static const struct imxmmc_platform_data mmc_pdata __initconst = {
@@ -161,10 +162,6 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = {
};
/* Framebuffer support */
-static const struct ipu_platform_data ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static const struct fb_videomode fb_modedb = {
/* 640x480 TFT panel (IPS-056T) */
.name = "CRT-VGA",
@@ -198,7 +195,7 @@ static void __init mx31lilly_init_fb(void)
return;
}
- imx31_add_ipu_core(&ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&fb_pdata);
gpio_direction_output(LCD_VCC_EN_GPIO, 1);
}
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
index bf0fb87946b..83d17d9e0bc 100644
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -116,7 +116,8 @@ static int mxc_mmc1_init(struct device *dev,
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)),
+ detect_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
@@ -137,7 +138,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data);
}
static const struct imxmmc_platform_data mmc_pdata __initconst = {
@@ -191,6 +192,6 @@ void __init mx31lite_db_init(void)
imx31_add_mxc_mmc(0, &mmc_pdata);
imx31_add_spi_imx0(&spi0_pdata);
gpio_led_register_device(-1, &litekit_led_platform_data);
- imx31_add_imx2_wdt(NULL);
- imx31_add_mxc_rtc(NULL);
+ imx31_add_imx2_wdt();
+ imx31_add_mxc_rtc();
}
diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
index ec6ca91b299..ee870c49bc6 100644
--- a/arch/arm/mach-imx/mx51_efika.c
+++ b/arch/arm/mach-imx/mx51_efika.c
@@ -587,7 +587,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
.bus_num = 0,
.chip_select = 0,
.platform_data = &mx51_efika_mc13892_data,
- .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
+ /* irq number is run-time assigned */
},
};
@@ -620,6 +620,7 @@ void __init efika_board_common_init(void)
gpio_request(EFIKAMX_PMIC, "pmic irq");
gpio_direction_input(EFIKAMX_PMIC);
+ mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
spi_register_board_info(mx51_efika_spi_board_info,
ARRAY_SIZE(mx51_efika_spi_board_info));
imx51_add_ecspi(0, &mx51_efika_spi_pdata);
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index 99afbc3f43a..9917e2ff51d 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -95,14 +95,14 @@ static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void
{
int ret;
- ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
- "imx-mmc-detect", data);
+ ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
+ IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
if (ret)
return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
if (ret) {
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
return ret;
}
@@ -113,7 +113,7 @@ static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
gpio_free(GPIO_PORTC + 28);
}
@@ -192,8 +192,7 @@ static struct resource pcm970_sja1000_resources[] = {
.end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_GPIOE(19),
- .end = IRQ_GPIOE(19),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -227,5 +226,7 @@ void __init pcm970_baseboard_init(void)
imx27_add_imx_fb(&pcm038_fb_data);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
imx27_add_mxc_mmc(1, &sdhc_pdata);
+ pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19));
+ pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19));
platform_device_register(&pcm970_sja1000);
}
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index e26a9cb05ed..19621ed1ffa 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -12,19 +12,30 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/cacheflush.h>
+#include <asm/system_misc.h>
#include <asm/tlbflush.h>
#include <mach/common.h>
+#include <mach/cpuidle.h>
#include <mach/hardware.h>
#include "crm-regs-imx5.h"
-static struct clk *gpc_dvfs_clk;
+/*
+ * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
+ * This is also the lowest power state possible without affecting
+ * non-cpu parts of the system. For these reasons, imx5 should default
+ * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also
+ * uses this state and needs to take no action when registers remain confgiured
+ * for this state.
+ */
+#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
/*
* set cpu low power mode before WFI instruction. This function is called
* mx5 because it can be used for mx50, mx51, and mx53.
*/
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
{
u32 plat_lpc, arm_srpgcr, ccm_clpcr;
u32 empgc0, empgc1;
@@ -87,11 +98,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
}
}
-static int mx5_suspend_prepare(void)
-{
- return clk_prepare_enable(gpc_dvfs_clk);
-}
-
static int mx5_suspend_enter(suspend_state_t state)
{
switch (state) {
@@ -99,7 +105,7 @@ static int mx5_suspend_enter(suspend_state_t state)
mx5_cpu_lp_set(STOP_POWER_OFF);
break;
case PM_SUSPEND_STANDBY:
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ /* DEFAULT_IDLE_STATE already configured */
break;
default:
return -EINVAL;
@@ -114,12 +120,10 @@ static int mx5_suspend_enter(suspend_state_t state)
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
- return 0;
-}
-static void mx5_suspend_finish(void)
-{
- clk_disable_unprepare(gpc_dvfs_clk);
+ /* return registers to default idle state */
+ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
+ return 0;
}
static int mx5_pm_valid(suspend_state_t state)
@@ -129,25 +133,80 @@ static int mx5_pm_valid(suspend_state_t state)
static const struct platform_suspend_ops mx5_suspend_ops = {
.valid = mx5_pm_valid,
- .prepare = mx5_suspend_prepare,
.enter = mx5_suspend_enter,
- .finish = mx5_suspend_finish,
};
-static int __init mx5_pm_init(void)
+static inline int imx5_cpu_do_idle(void)
+{
+ int ret = tzic_enable_wake();
+
+ if (likely(!ret))
+ cpu_do_idle();
+
+ return ret;
+}
+
+static void imx5_pm_idle(void)
+{
+ imx5_cpu_do_idle();
+}
+
+static int imx5_cpuidle_enter(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int idx)
+{
+ int ret;
+
+ ret = imx5_cpu_do_idle();
+ if (ret < 0)
+ return ret;
+
+ return idx;
+}
+
+static struct cpuidle_driver imx5_cpuidle_driver = {
+ .name = "imx5_cpuidle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = {
+ .enter = imx5_cpuidle_enter,
+ .exit_latency = 2,
+ .target_residency = 1,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "IMX5 SRPG",
+ .desc = "CPU state retained,powered off",
+ },
+ .state_count = 1,
+};
+
+static int __init imx5_pm_common_init(void)
{
- if (!cpu_is_mx51() && !cpu_is_mx53())
- return 0;
+ int ret;
+ struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (gpc_dvfs_clk == NULL)
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+ if (IS_ERR(gpc_dvfs_clk))
+ return PTR_ERR(gpc_dvfs_clk);
- if (!IS_ERR(gpc_dvfs_clk)) {
- if (cpu_is_mx51())
- suspend_set_ops(&mx5_suspend_ops);
- } else
- return -EPERM;
+ ret = clk_prepare_enable(gpc_dvfs_clk);
+ if (ret)
+ return ret;
+ arm_pm_idle = imx5_pm_idle;
+
+ /* Set the registers to the default cpu idle state. */
+ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
+
+ imx_cpuidle_init(&imx5_cpuidle_driver);
return 0;
}
-device_initcall(mx5_pm_init);
+
+void __init imx51_pm_init(void)
+{
+ int ret = imx5_pm_common_init();
+ if (!ret)
+ suspend_set_ops(&mx5_suspend_ops);
+}
+
+void __init imx53_pm_init(void)
+{
+ imx5_pm_common_init();
+}