diff options
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r-- | arch/arm/mach-imx/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/mach-imx/clk-gate2.c | 23 | ||||
-rw-r--r-- | arch/arm/mach-imx/clk-imx6q.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-imx/clk-imx6sx.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-imx/clk-pllv3.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-imx/clk-vf610.c | 8 | ||||
-rw-r--r-- | arch/arm/mach-imx/clk.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-imx/common.h | 4 | ||||
-rw-r--r-- | arch/arm/mach-imx/cpuidle-imx6sx.c | 105 | ||||
-rw-r--r-- | arch/arm/mach-imx/cpuidle.h | 5 | ||||
-rw-r--r-- | arch/arm/mach-imx/gpc.c | 25 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-imx6q.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-imx6sx.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-vf610.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-imx/mmdc.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/pm-imx6.c | 7 |
16 files changed, 186 insertions, 23 deletions
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f5ac685a29f..8d1b1018090 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -32,8 +32,7 @@ ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o -# i.MX6SX reuses i.MX6Q cpuidle driver -obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6q.o +obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o endif ifdef CONFIG_SND_IMX_SOC diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 5a75cdc8189..8935bff99fe 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -96,15 +96,30 @@ static int clk_gate2_is_enabled(struct clk_hw *hw) { struct clk_gate2 *gate = to_clk_gate2(hw); - if (gate->share_count) - return !!__clk_get_enable_count(hw->clk); - else - return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); + return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); +} + +static void clk_gate2_disable_unused(struct clk_hw *hw) +{ + struct clk_gate2 *gate = to_clk_gate2(hw); + unsigned long flags = 0; + u32 reg; + + spin_lock_irqsave(gate->lock, flags); + + if (!gate->share_count || *gate->share_count == 0) { + reg = readl(gate->reg); + reg &= ~(3 << gate->bit_idx); + writel(reg, gate->reg); + } + + spin_unlock_irqrestore(gate->lock, flags); } static struct clk_ops clk_gate2_ops = { .enable = clk_gate2_enable, .disable = clk_gate2_disable, + .disable_unused = clk_gate2_disable_unused, .is_enabled = clk_gate2_is_enabled, }; diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 5951660d1bd..d04a430607b 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -144,7 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) post_div_table[1].div = 1; post_div_table[2].div = 1; video_div_table[1].div = 1; - video_div_table[2].div = 1; + video_div_table[3].div = 1; } clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); @@ -386,7 +386,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); clk[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); - clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ipg", base + 0x6c, 16, &share_count_esai); + clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); clk[IMX6QDL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index 17354a11356..5a3e5a159e7 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -558,6 +558,9 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]); + clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]); + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); } diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index 0ad6e5442fd..641ebc50892 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -31,6 +31,7 @@ * @base: base address of PLL registers * @powerup_set: set POWER bit to power up the PLL * @div_mask: mask of divider bits + * @div_shift: shift of divider bits * * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3 * is actually a multiplier, and always sits at bit 0. @@ -40,6 +41,7 @@ struct clk_pllv3 { void __iomem *base; bool powerup_set; u32 div_mask; + u32 div_shift; }; #define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw) @@ -97,7 +99,7 @@ static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 div = readl_relaxed(pll->base) & pll->div_mask; + u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask; return (div == 1) ? parent_rate * 22 : parent_rate * 20; } @@ -125,8 +127,8 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; val = readl_relaxed(pll->base); - val &= ~pll->div_mask; - val |= div; + val &= ~(pll->div_mask << pll->div_shift); + val |= (div << pll->div_shift); writel_relaxed(val, pll->base); return clk_pllv3_wait_lock(pll); @@ -295,6 +297,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, case IMX_PLLV3_SYS: ops = &clk_pllv3_sys_ops; break; + case IMX_PLLV3_USB_VF610: + pll->div_shift = 1; case IMX_PLLV3_USB: ops = &clk_pllv3_ops; pll->powerup_set = true; diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index 5937ddee1a9..61876ed6e11 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -172,11 +172,11 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1); clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1); - clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1); + clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x2); clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f); clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3); clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f); - clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1); + clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x2); clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); @@ -267,6 +267,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8)); clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9)); clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10)); + clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9)); + clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10)); clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6)); clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7)); @@ -380,6 +382,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1)); clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2)); + clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7)); + imx_check_clocks(clk, ARRAY_SIZE(clk)); clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 5ef82e2f8fc..6a07903a28b 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -20,6 +20,7 @@ enum imx_pllv3_type { IMX_PLLV3_GENERIC, IMX_PLLV3_SYS, IMX_PLLV3_USB, + IMX_PLLV3_USB_VF610, IMX_PLLV3_AV, IMX_PLLV3_ENET, }; diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index cfcdb623d78..1028b6c505c 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -70,6 +70,10 @@ void imx_set_soc_revision(unsigned int rev); unsigned int imx_get_soc_revision(void); void imx_init_revision_from_anatop(void); struct device *imx_soc_device_init(void); +void imx6_enable_rbc(bool enable); +void imx_gpc_set_arm_power_in_lpm(bool power_off); +void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); +void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c new file mode 100644 index 00000000000..5a36722b089 --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/module.h> +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> + +#include "common.h" +#include "cpuidle.h" + +static int imx6sx_idle_finish(unsigned long val) +{ + cpu_do_idle(); + + return 0; +} + +static int imx6sx_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + imx6q_set_lpm(WAIT_UNCLOCKED); + + switch (index) { + case 1: + cpu_do_idle(); + break; + case 2: + imx6_enable_rbc(true); + imx_gpc_set_arm_power_in_lpm(true); + imx_set_cpu_jump(0, v7_cpu_resume); + /* Need to notify there is a cpu pm operation. */ + cpu_pm_enter(); + cpu_cluster_pm_enter(); + + cpu_suspend(0, imx6sx_idle_finish); + + cpu_cluster_pm_exit(); + cpu_pm_exit(); + imx_gpc_set_arm_power_in_lpm(false); + imx6_enable_rbc(false); + break; + default: + break; + } + + imx6q_set_lpm(WAIT_CLOCKED); + + return index; +} + +static struct cpuidle_driver imx6sx_cpuidle_driver = { + .name = "imx6sx_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .enter = imx6sx_enter_wait, + .name = "WAIT", + .desc = "Clock off", + }, + /* WAIT + ARM power off */ + { + /* + * ARM gating 31us * 5 + RBC clear 65us + * and some margin for SW execution, here set it + * to 300us. + */ + .exit_latency = 300, + .target_residency = 500, + .enter = imx6sx_enter_wait, + .name = "LOW-POWER-IDLE", + .desc = "ARM power off", + }, + }, + .state_count = 3, + .safe_state_index = 0, +}; + +int __init imx6sx_cpuidle_init(void) +{ + imx6_enable_rbc(false); + /* + * set ARM power up/down timing to the fastest, + * sw2iso and sw can be set to one 32K cycle = 31us + * except for power up sw2iso which need to be + * larger than LDO ramp up time. + */ + imx_gpc_set_arm_power_up_timing(2, 1); + imx_gpc_set_arm_power_down_timing(1, 1); + + return cpuidle_register(&imx6sx_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index 24e33670417..f9140128ba0 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -14,6 +14,7 @@ extern int imx5_cpuidle_init(void); extern int imx6q_cpuidle_init(void); extern int imx6sl_cpuidle_init(void); +extern int imx6sx_cpuidle_init(void); #else static inline int imx5_cpuidle_init(void) { @@ -27,4 +28,8 @@ static inline int imx6sl_cpuidle_init(void) { return 0; } +static inline int imx6sx_cpuidle_init(void) +{ + return 0; +} #endif diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 5f3602ec74f..745caa18ab2 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -20,6 +20,10 @@ #define GPC_IMR1 0x008 #define GPC_PGC_CPU_PDN 0x2a0 +#define GPC_PGC_CPU_PUPSCR 0x2a4 +#define GPC_PGC_CPU_PDNSCR 0x2a8 +#define GPC_PGC_SW2ISO_SHIFT 0x8 +#define GPC_PGC_SW_SHIFT 0x0 #define IMR_NUM 4 @@ -27,6 +31,23 @@ static void __iomem *gpc_base; static u32 gpc_wake_irqs[IMR_NUM]; static u32 gpc_saved_imrs[IMR_NUM]; +void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw) +{ + writel_relaxed((sw2iso << GPC_PGC_SW2ISO_SHIFT) | + (sw << GPC_PGC_SW_SHIFT), gpc_base + GPC_PGC_CPU_PUPSCR); +} + +void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw) +{ + writel_relaxed((sw2iso << GPC_PGC_SW2ISO_SHIFT) | + (sw << GPC_PGC_SW_SHIFT), gpc_base + GPC_PGC_CPU_PDNSCR); +} + +void imx_gpc_set_arm_power_in_lpm(bool power_off) +{ + writel_relaxed(power_off, gpc_base + GPC_PGC_CPU_PDN); +} + void imx_gpc_pre_suspend(bool arm_power_off) { void __iomem *reg_imr1 = gpc_base + GPC_IMR1; @@ -34,7 +55,7 @@ void imx_gpc_pre_suspend(bool arm_power_off) /* Tell GPC to power off ARM core when suspend */ if (arm_power_off) - writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN); + imx_gpc_set_arm_power_in_lpm(arm_power_off); for (i = 0; i < IMR_NUM; i++) { gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4); @@ -48,7 +69,7 @@ void imx_gpc_post_resume(void) int i; /* Keep ARM core powered on for other low-power modes */ - writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN); + imx_gpc_set_arm_power_in_lpm(false); for (i = 0; i < IMR_NUM; i++) writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5057d61298b..4ad6e473cf8 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -329,7 +329,7 @@ static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev) if (dev_pm_opp_disable(cpu_dev, 852000000)) pr_warn("failed to disable 852 MHz OPP\n"); } - + iounmap(base); put_node: of_node_put(np); } diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 7a96c657723..66988eb6a3a 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -90,7 +90,7 @@ static void __init imx6sx_init_irq(void) static void __init imx6sx_init_late(void) { - imx6q_cpuidle_init(); + imx6sx_cpuidle_init(); if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index c11ab6a1dc8..2e7c75b66fe 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -13,11 +13,14 @@ #include <asm/hardware/cache-l2x0.h> static const char * const vf610_dt_compat[] __initconst = { + "fsl,vf500", + "fsl,vf510", + "fsl,vf600", "fsl,vf610", NULL, }; -DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") +DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF5xx/VF6xx (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, .dt_compat = vf610_dt_compat, diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index a377f95033a..0411f0664c1 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -68,7 +68,7 @@ int imx_mmdc_get_ddr_type(void) return ddr_type; } -static struct of_device_id imx_mmdc_dt_ids[] = { +static const struct of_device_id imx_mmdc_dt_ids[] = { { .compatible = "fsl,imx6q-mmdc", }, { /* sentinel */ } }; diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 5d2c1bd5f5e..46fd695203c 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -205,7 +205,7 @@ void imx6q_set_int_mem_clk_lpm(bool enable) writel_relaxed(val, ccm_base + CGPR); } -static void imx6q_enable_rbc(bool enable) +void imx6_enable_rbc(bool enable) { u32 val; @@ -359,17 +359,16 @@ static int imx6q_pm_enter(suspend_state_t state) * RBC setting, so we do NOT need to do that here. */ if (!imx6_suspend_in_ocram_fn) - imx6q_enable_rbc(true); + imx6_enable_rbc(true); imx_gpc_pre_suspend(true); imx_anatop_pre_suspend(); - imx_set_cpu_jump(0, v7_cpu_resume); /* Zzz ... */ cpu_suspend(0, imx6q_suspend_finish); if (cpu_is_imx6q() || cpu_is_imx6dl()) imx_smp_prepare(); imx_anatop_post_resume(); imx_gpc_post_resume(); - imx6q_enable_rbc(false); + imx6_enable_rbc(false); imx6q_enable_wb(false); imx6q_set_int_mem_clk_lpm(true); imx6q_set_lpm(WAIT_CLOCKED); |