summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ixp23xx/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ixp23xx/pci.c')
-rw-r--r--arch/arm/mach-ixp23xx/pci.c275
1 files changed, 275 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
new file mode 100644
index 00000000000..5330ad78c1b
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-ixp23xx/pci.c
+ *
+ * PCI routines for IXP23XX based systems
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * based on original code:
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Copyright 2002-2005 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+extern int (*external_fault) (unsigned long, struct pt_regs *);
+
+static int pci_master_aborts = 0;
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int clear_master_aborts(void);
+
+static u32
+*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+ u32 *paddress;
+
+ /*
+ * Must be dword aligned
+ */
+ where &= ~3;
+
+ /*
+ * For top bus, generate type 0, else type 1
+ */
+ if (!bus_nr) {
+ if (PCI_SLOT(devfn) >= 8)
+ return 0;
+
+ paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
+ | (1 << (PCI_SLOT(devfn) + 16))
+ | (PCI_FUNC(devfn) << 8) | where);
+ } else {
+ paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
+ | (bus_nr << 16)
+ | (PCI_SLOT(devfn) << 11)
+ | (PCI_FUNC(devfn) << 8) | where);
+ }
+
+ return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+ /*0*/ 0,
+ /*1*/ 0xff,
+ /*2*/ 0xffff,
+ /*3*/ 0,
+ /*4*/ 0xffffffff,
+};
+
+static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ u32 n;
+ u32 *addr;
+
+ n = where % 4;
+
+ DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+ addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ pci_master_aborts = 0;
+ *value = (*addr >> (8*n)) & bytemask[size];
+ if (pci_master_aborts) {
+ pci_master_aborts = 0;
+ *value = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checking on the address for writes.
+ * It's assumed that the user checked for the device existing first
+ * by doing a read first.
+ */
+static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ u32 mask;
+ u32 *addr;
+ u32 temp;
+
+ mask = ~(bytemask[size] << ((where % 0x4) * 8));
+ addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ temp = (u32) (value) << ((where % 0x4) * 8);
+ *addr = (*addr & mask) | temp;
+
+ clear_master_aborts();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops ixp23xx_pci_ops = {
+ .read = ixp23xx_pci_read_config,
+ .write = ixp23xx_pci_write_config,
+};
+
+struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+ return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
+}
+
+int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ volatile unsigned long temp;
+ unsigned long flags;
+
+ pci_master_aborts = 1;
+
+ local_irq_save(flags);
+ temp = *IXP23XX_PCI_CONTROL;
+
+ /*
+ * master abort and cmd tgt err
+ */
+ if (temp & ((1 << 8) | (1 << 5)))
+ *IXP23XX_PCI_CONTROL = temp;
+
+ temp = *IXP23XX_PCI_CMDSTAT;
+
+ if (temp & (1 << 29))
+ *IXP23XX_PCI_CMDSTAT = temp;
+ local_irq_restore(flags);
+
+ /*
+ * If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
+
+ return 0;
+}
+
+int clear_master_aborts(void)
+{
+ volatile u32 temp;
+
+ temp = *IXP23XX_PCI_CONTROL;
+
+ /*
+ * master abort and cmd tgt err
+ */
+ if (temp & ((1 << 8) | (1 << 5)))
+ *IXP23XX_PCI_CONTROL = temp;
+
+ temp = *IXP23XX_PCI_CMDSTAT;
+
+ if (temp & (1 << 29))
+ *IXP23XX_PCI_CMDSTAT = temp;
+
+ return 0;
+}
+
+void __init ixp23xx_pci_preinit(void)
+{
+#ifdef __ARMEB__
+ *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */
+#endif
+ /*
+ * ADDR_31 needs to be clear for PCI memory access to CPP memory
+ */
+ *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
+ *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
+
+ /*
+ * Select correct memory for PCI inbound transactions
+ */
+ if (ixp23xx_cpp_boot()) {
+ *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
+ } else {
+ *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
+ }
+
+ hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+ "PCI config cycle to non-existent device");
+
+ *IXP23XX_PCI_ADDR_EXT = 0x0000e000;
+}
+
+/*
+ * Prevent PCI layer from seeing the inbound host-bridge resources
+ */
+static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
+{
+ int i;
+
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
+
+/*
+ * IXP2300 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp23xx_pci_mem_space = {
+ .start = IXP23XX_PCI_MEM_START,
+ .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "PCI Mem Space"
+};
+
+static struct resource ixp23xx_pci_io_space = {
+ .start = 0x00000100,
+ .end = 0x01ffffff,
+ .flags = IORESOURCE_IO,
+ .name = "PCI I/O Space"
+};
+
+int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ if (nr >= 1)
+ return 0;
+
+ sys->resource[0] = &ixp23xx_pci_io_space;
+ sys->resource[1] = &ixp23xx_pci_mem_space;
+ sys->resource[2] = NULL;
+
+ return 1;
+}