1 files changed, 83 insertions, 0 deletions
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
new file mode 100644
index 00000000000..b36c55cba78
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * arch/arm/mach-kirkwood/board-ns2.c
+ *
+ * LaCie Network Space v2 board (and parents) initialization for drivers
+ * not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data ns2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static unsigned int ns2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Fan speed (bit 1) */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP14_GPIO,		/* USB fuse */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP17_GPIO,		/* SATA 1 power */
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP22_GPIO,		/* Fan speed (bit 0) */
+	MPP23_GPIO,		/* Fan power */
+	MPP24_GPIO,		/* USB mode select */
+	MPP25_GPIO,		/* Fan rotation fail */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP31_GPIO,		/* Board power off */
+	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
+	MPP33_GPO,		/* Fan speed (bit 2) */
+	0
+};
+
+#define NS2_GPIO_POWER_OFF	31
+
+static void ns2_power_off(void)
+{
+	gpio_set_value(NS2_GPIO_POWER_OFF, 1);
+}
+
+void __init ns2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(ns2_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&ns2_ge00_data);
+
+	if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = ns2_power_off;
+	else
+		pr_err("ns2: failed to configure power-off GPIO\n");
+}