1 files changed, 0 insertions, 70 deletions
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index 970174ad4a7..55ade93b93b 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -10,79 +10,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
 #include <mach/kirkwood.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
-
-#define NSA310_GPIO_USB_POWER_OFF	21
-#define NSA310_GPIO_POWER_OFF		48
-
-static unsigned int nsa310_mpp_config[] __initdata = {
-	MPP12_GPIO, /* led esata green */
-	MPP13_GPIO, /* led esata red */
-	MPP15_GPIO, /* led usb green */
-	MPP16_GPIO, /* led usb red */
-	MPP21_GPIO, /* control usb power off */
-	MPP28_GPIO, /* led sys green */
-	MPP29_GPIO, /* led sys red */
-	MPP36_GPIO, /* key reset */
-	MPP37_GPIO, /* key copy */
-	MPP39_GPIO, /* led copy green */
-	MPP40_GPIO, /* led copy red */
-	MPP41_GPIO, /* led hdd green */
-	MPP42_GPIO, /* led hdd red */
-	MPP44_GPIO, /* ?? */
-	MPP46_GPIO, /* key power */
-	MPP48_GPIO, /* control power off */
-	0
-};
-
-static struct i2c_board_info __initdata nsa310_i2c_info[] = {
-	{ I2C_BOARD_INFO("adt7476", 0x2e) },
-};
-
-static void nsa310_power_off(void)
-{
-	gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
-}
-
-static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
-				       const char *label)
-{
-	int err;
-
-	err = gpio_request_one(gpio, flags, label);
-	if (err)
-		pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
-			gpio, label, err);
-
-	return err;
-}
-
-static void __init nsa310_gpio_init(void)
-{
-	int err;
-
-	err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
-				  "Power Off");
-	if (!err)
-		pm_power_off = nsa310_power_off;
-
-	nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
-			    "USB Power Off");
-}
-
-void __init nsa310_init(void)
-{
-	kirkwood_mpp_conf(nsa310_mpp_config);
-
-	nsa310_gpio_init();
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
-}
 
 static int __init nsa310_pci_init(void)
 {