diff options
Diffstat (limited to 'arch/arm/mach-kirkwood/rd88f6281-setup.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/rd88f6281-setup.c | 32 |
1 files changed, 23 insertions, 9 deletions
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 9a0e905d10c..31e996d65fc 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -11,21 +11,20 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/pci.h> #include <linux/irq.h> -#include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> -#include <linux/timer.h> +#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/pci.h> #include <mach/kirkwood.h> +#include <plat/mvsdio.h> #include <plat/orion_nand.h> #include "common.h" +#include "mpp.h" static struct mtd_partition rd88f6281_nand_parts[] = { { @@ -75,7 +74,7 @@ static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .duplex = DUPLEX_FULL, }; -static struct dsa_platform_data rd88f6281_switch_data = { +static struct dsa_chip_data rd88f6281_switch_chip_data = { .port_names[0] = "lan1", .port_names[1] = "lan2", .port_names[2] = "lan3", @@ -83,6 +82,11 @@ static struct dsa_platform_data rd88f6281_switch_data = { .port_names[5] = "cpu", }; +static struct dsa_platform_data rd88f6281_switch_plat_data = { + .nr_chips = 1, + .chip = &rd88f6281_switch_chip_data, +}; + static struct mv643xx_eth_platform_data rd88f6281_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; @@ -91,6 +95,15 @@ static struct mv_sata_platform_data rd88f6281_sata_data = { .n_ports = 2, }; +static struct mvsdio_platform_data rd88f6281_mvsdio_data = { + .gpio_card_detect = 28, +}; + +static unsigned int rd88f6281_mpp_config[] __initdata = { + MPP28_GPIO, + 0 +}; + static void __init rd88f6281_init(void) { u32 dev, rev; @@ -99,21 +112,22 @@ static void __init rd88f6281_init(void) * Basic setup. Needs to be called early. */ kirkwood_init(); + kirkwood_mpp_conf(rd88f6281_mpp_config); kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); kirkwood_pcie_id(&dev, &rev); if (rev == MV88F6281_REV_A0) { - rd88f6281_switch_data.sw_addr = 10; + rd88f6281_switch_chip_data.sw_addr = 10; kirkwood_ge01_init(&rd88f6281_ge01_data); } else { - rd88f6281_switch_data.port_names[4] = "wan"; + rd88f6281_switch_chip_data.port_names[4] = "wan"; } - kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ); + kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ); - kirkwood_rtc_init(); kirkwood_sata_init(&rd88f6281_sata_data); + kirkwood_sdio_init(&rd88f6281_mvsdio_data); kirkwood_uart0_init(); platform_device_register(&rd88f6281_nand_flash); |