summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-kirkwood/sheevaplug-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-kirkwood/sheevaplug-setup.c')
-rw-r--r--arch/arm/mach-kirkwood/sheevaplug-setup.c50
1 files changed, 48 insertions, 2 deletions
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index c7319eeac8b..a00879d34d5 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
@@ -42,10 +43,19 @@ static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+ .n_ports = 2,
+};
+
static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+ .gpio_write_protect = 44, /* MPP44 used as SD write protect */
+ .gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
static struct gpio_led sheevaplug_led_pins[] = {
{
.name = "plug:green:health",
@@ -74,13 +84,26 @@ static unsigned int sheevaplug_mpp_config[] __initdata = {
0
};
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP44_GPIO, /* SD Write Protect */
+ MPP47_GPIO, /* SD Card Detect */
+ MPP49_GPIO, /* LED Green */
+ 0
+};
+
static void __init sheevaplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
- kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+ /* setup gpio pin select */
+ if (machine_is_sheeva_esata())
+ kirkwood_mpp_conf(sheeva_esata_mpp_config);
+ else
+ kirkwood_mpp_conf(sheevaplug_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -91,11 +114,21 @@ static void __init sheevaplug_init(void)
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);
- kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+ /* honor lower power consumption for plugs with out eSATA */
+ if (machine_is_sheeva_esata())
+ kirkwood_sata_init(&sheeva_esata_sata_data);
+
+ /* enable sd wp and sd cd on plugs with esata */
+ if (machine_is_sheeva_esata())
+ kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+ else
+ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
platform_device_register(&sheevaplug_leds);
}
+#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +139,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = sheevaplug_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif