diff options
Diffstat (limited to 'arch/arm/mach-kirkwood')
20 files changed, 811 insertions, 291 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index cc25501b57f..34106335c72 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -58,6 +58,12 @@ config MACH_TS41X QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS devices. +config MACH_DOCKSTAR + bool "Seagate FreeAgent DockStar" + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent DockStar. + config MACH_OPENRD bool @@ -100,6 +106,12 @@ config MACH_NETSPACE_MAX_V2 Say 'Y' here if you want your kernel to support the LaCie Network Space Max v2 NAS. +config MACH_D2NET_V2 + bool "LaCie d2 Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie d2 Network v2 NAS. + config MACH_NET2BIG_V2 bool "LaCie 2Big Network v2 NAS Board" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 295d7baa6ae..5dcaa81a2ec 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -7,14 +7,16 @@ obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o +obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o -obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o -obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o -obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o -obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c new file mode 100644 index 00000000000..4aa86e4a152 --- /dev/null +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -0,0 +1,229 @@ +/* + * arch/arm/mach-kirkwood/d2net_v2-setup.c + * + * LaCie d2 Network Space v2 Board Setup + * + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <mach/leds-ns2.h> +#include "common.h" +#include "mpp.h" +#include "lacie_v2-common.h" + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data d2net_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data d2net_v2_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define D2NET_V2_GPIO_PUSH_BUTTON 34 +#define D2NET_V2_GPIO_POWER_SWITCH_ON 13 +#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15 + +#define D2NET_V2_SWITCH_POWER_ON 0x1 +#define D2NET_V2_SWITCH_POWER_OFF 0x2 + +static struct gpio_keys_button d2net_v2_buttons[] = { + [0] = { + .type = EV_SW, + .code = D2NET_V2_SWITCH_POWER_ON, + .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON, + .desc = "Back power switch (on|auto)", + .active_low = 0, + }, + [1] = { + .type = EV_SW, + .code = D2NET_V2_SWITCH_POWER_OFF, + .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF, + .desc = "Back power switch (auto|off)", + .active_low = 0, + }, + [2] = { + .code = KEY_POWER, + .gpio = D2NET_V2_GPIO_PUSH_BUTTON, + .desc = "Front Push Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data d2net_v2_button_data = { + .buttons = d2net_v2_buttons, + .nbuttons = ARRAY_SIZE(d2net_v2_buttons), +}; + +static struct platform_device d2net_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &d2net_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +#define D2NET_V2_GPIO_RED_LED 12 + +static struct gpio_led d2net_v2_gpio_led_pins[] = { + { + .name = "d2net_v2:red:fail", + .gpio = D2NET_V2_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data d2net_v2_gpio_leds_data = { + .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins), + .leds = d2net_v2_gpio_led_pins, +}; + +static struct platform_device d2net_v2_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &d2net_v2_gpio_leds_data, + }, +}; + +/***************************************************************************** + * Dual-GPIO CPLD LEDs + ****************************************************************************/ + +#define D2NET_V2_GPIO_BLUE_LED_SLOW 29 +#define D2NET_V2_GPIO_BLUE_LED_CMD 30 + +static struct ns2_led d2net_v2_led_pins[] = { + { + .name = "d2net_v2:blue:sata", + .cmd = D2NET_V2_GPIO_BLUE_LED_CMD, + .slow = D2NET_V2_GPIO_BLUE_LED_SLOW, + }, +}; + +static struct ns2_led_platform_data d2net_v2_leds_data = { + .num_leds = ARRAY_SIZE(d2net_v2_led_pins), + .leds = d2net_v2_led_pins, +}; + +static struct platform_device d2net_v2_leds = { + .name = "leds-ns2", + .id = -1, + .dev = { + .platform_data = &d2net_v2_leds_data, + }, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int d2net_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Request power-off */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP13_GPIO, /* Rear power switch (on|auto) */ + MPP14_GPIO, /* USB fuse */ + MPP15_GPIO, /* Rear power switch (auto|off) */ + MPP16_GPIO, /* SATA 0 power */ + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */ + MPP35_GPIO, /* Inhibit power-off */ + 0 +}; + +#define D2NET_V2_GPIO_POWER_OFF 7 + +static void d2net_v2_power_off(void) +{ + gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1); +} + +static void __init d2net_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(d2net_v2_mpp_config); + + lacie_v2_hdd_power_init(1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&d2net_v2_ge00_data); + kirkwood_sata_init(&d2net_v2_sata_data); + kirkwood_uart0_init(); + lacie_v2_register_flash(); + lacie_v2_register_i2c_devices(); + + platform_device_register(&d2net_v2_leds); + platform_device_register(&d2net_v2_gpio_leds); + platform_device_register(&d2net_v2_gpio_buttons); + + if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = d2net_v2_power_off; + else + pr_err("d2net_v2: failed to configure power-off GPIO\n"); +} + +MACHINE_START(D2NET_V2, "LaCie d2 Network v2") + .boot_params = 0x00000100, + .init_machine = d2net_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &lacie_v2_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index 16f6691e7c6..9ea71182d31 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -97,8 +97,6 @@ subsys_initcall(db88f6281_pci_init); MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = db88f6281_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c new file mode 100644 index 00000000000..433ea368c06 --- /dev/null +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -0,0 +1,110 @@ +/* + * arch/arm/mach-kirkwood/dockstar-setup.c + * + * Seagate FreeAgent DockStar Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mtd/partitions.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mtd_partition dockstar_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data dockstar_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct gpio_led dockstar_led_pins[] = { + { + .name = "dockstar:green:health", + .default_trigger = "default-on", + .gpio = 46, + .active_low = 1, + }, + { + .name = "dockstar:orange:misc", + .default_trigger = "none", + .gpio = 47, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dockstar_led_data = { + .leds = dockstar_led_pins, + .num_leds = ARRAY_SIZE(dockstar_led_pins), +}; + +static struct platform_device dockstar_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dockstar_led_data, + } +}; + +static unsigned int dockstar_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED green */ + MPP47_GPIO, /* LED orange */ + 0 +}; + +static void __init dockstar_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + + /* setup gpio pin select */ + kirkwood_mpp_conf(dockstar_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&dockstar_ge00_data); + + platform_device_register(&dockstar_leds); +} + +MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") + .boot_params = 0x00000100, + .init_machine = dockstar_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 54d07c89d4f..8f47dc0a2fe 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -121,8 +121,6 @@ static void __init guruplug_init(void) MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") /* Maintainer: Siddarth Gore <gores@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = guruplug_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index d0606774dea..db06ae437d0 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include <mach/bridge-regs.h> - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE - ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =KIRKWOOD_REGS_PHYS_BASE + ldr \rv, =KIRKWOOD_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h new file mode 100644 index 00000000000..24b536ebdf1 --- /dev/null +++ b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h @@ -0,0 +1,55 @@ +/* + * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h + * + * Platform data structure for netxbig LED driver + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_LEDS_NETXBIG_H +#define __MACH_LEDS_NETXBIG_H + +struct netxbig_gpio_ext { + unsigned *addr; + int num_addr; + unsigned *data; + int num_data; + unsigned enable; +}; + +enum netxbig_led_mode { + NETXBIG_LED_OFF, + NETXBIG_LED_ON, + NETXBIG_LED_SATA, + NETXBIG_LED_TIMER1, + NETXBIG_LED_TIMER2, + NETXBIG_LED_MODE_NUM, +}; + +#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM + +struct netxbig_led_timer { + unsigned long delay_on; + unsigned long delay_off; + enum netxbig_led_mode mode; +}; + +struct netxbig_led { + const char *name; + const char *default_trigger; + int mode_addr; + int *mode_val; + int bright_addr; +}; + +struct netxbig_led_platform_data { + struct netxbig_gpio_ext *gpio_ext; + struct netxbig_led_timer *timer; + int num_timer; + struct netxbig_led *leds; + int num_leds; +}; + +#endif /* __MACH_LEDS_NETXBIG_H */ diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c new file mode 100644 index 00000000000..d3ea1b6c8a0 --- /dev/null +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -0,0 +1,127 @@ +/* + * arch/arm/mach-kirkwood/lacie_v2-common.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/gpio.h> +#include <asm/mach/time.h> +#include <mach/kirkwood.h> +#include <mach/irqs.h> +#include <plat/time.h> +#include "common.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition lacie_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data lacie_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = lacie_v2_flash_parts, + .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts), +}; + +static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &lacie_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +void __init lacie_v2_register_flash(void) +{ + spi_register_board_info(lacie_v2_spi_slave_info, + ARRAY_SIZE(lacie_v2_spi_slave_info)); + kirkwood_spi_init(); +} + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata lacie_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +void __init lacie_v2_register_i2c_devices(void) +{ + kirkwood_i2c_init(); + i2c_register_board_info(0, lacie_v2_i2c_info, + ARRAY_SIZE(lacie_v2_i2c_info)); +} + +/***************************************************************************** + * Hard Disk power + ****************************************************************************/ + +static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 }; + +void __init lacie_v2_hdd_power_init(int hdd_num) +{ + int i; + int err; + + /* Power up all hard disks. */ + for (i = 0; i < hdd_num; i++) { + err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL); + if (err == 0) { + err = gpio_direction_output( + lacie_v2_gpio_hdd_power[i], 1); + /* Free the HDD power GPIOs. This allow user-space to + * configure them via the gpiolib sysfs interface. */ + gpio_free(lacie_v2_gpio_hdd_power[i]); + } + if (err) + pr_err("Failed to power up HDD%d\n", i + 1); + } +} + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void lacie_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer lacie_v2_timer = { + .init = lacie_v2_timer_init, +}; diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h new file mode 100644 index 00000000000..af521315b87 --- /dev/null +++ b/arch/arm/mach-kirkwood/lacie_v2-common.h @@ -0,0 +1,18 @@ +/* + * arch/arm/mach-kirkwood/lacie_v2-common.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H +#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H + +void lacie_v2_register_flash(void); +void lacie_v2_register_i2c_devices(void); +void lacie_v2_hdd_power_init(int hdd_num); + +extern struct sys_timer lacie_v2_timer; + +#endif diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index c6b92b42eb4..1e5266f57e2 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -163,8 +163,6 @@ subsys_initcall(mv88f6281gtw_ge_pci_init); MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = mv88f6281gtw_ge_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index d26bf324738..5e286441b8f 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -24,56 +24,19 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/i2c/at24.h> #include <linux/input.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> #include <mach/kirkwood.h> #include <mach/leds-ns2.h> -#include <plat/time.h> #include "common.h" #include "mpp.h" - -/***************************************************************************** - * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) - ****************************************************************************/ - -static struct mtd_partition netspace_v2_flash_parts[] = { - { - .name = "u-boot", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static const struct flash_platform_data netspace_v2_flash = { - .type = "mx25l4005a", - .name = "spi_flash", - .parts = netspace_v2_flash_parts, - .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts), -}; - -static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &netspace_v2_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; +#include "lacie_v2-common.h" /***************************************************************************** * Ethernet @@ -84,27 +47,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { }; /***************************************************************************** - * I2C devices - ****************************************************************************/ - -static struct at24_platform_data at24c04 = { - .byte_len = SZ_4K / 8, - .page_size = 16, -}; - -/* - * i2c addr | chip | description - * 0x50 | HT24LC04 | eeprom (512B) - */ - -static struct i2c_board_info __initdata netspace_v2_i2c_info[] = { - { - I2C_BOARD_INFO("24c04", 0x50), - .platform_data = &at24c04, - } -}; - -/***************************************************************************** * SATA ****************************************************************************/ @@ -112,35 +54,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = { .n_ports = 2, }; -#define NETSPACE_V2_GPIO_SATA0_POWER 16 -#define NETSPACE_V2_GPIO_SATA1_POWER 17 - -static void __init netspace_v2_sata_power_init(void) -{ - int err; - - err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power"); - if (err == 0) { - err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1); - if (err) - gpio_free(NETSPACE_V2_GPIO_SATA0_POWER); - } - if (err) - pr_err("netspace_v2: failed to setup SATA0 power\n"); - - if (machine_is_netspace_max_v2()) { - err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power"); - if (err == 0) { - err = gpio_direction_output( - NETSPACE_V2_GPIO_SATA1_POWER, 1); - if (err) - gpio_free(NETSPACE_V2_GPIO_SATA1_POWER); - } - if (err) - pr_err("netspace_v2: failed to setup SATA1 power\n"); - } -} - /***************************************************************************** * GPIO keys ****************************************************************************/ @@ -224,20 +137,6 @@ static struct platform_device netspace_v2_leds = { }; /***************************************************************************** - * Timer - ****************************************************************************/ - -static void netspace_v2_timer_init(void) -{ - kirkwood_tclk = 166666667; - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} - -struct sys_timer netspace_v2_timer = { - .init = netspace_v2_timer_init, -}; - -/***************************************************************************** * General Setup ****************************************************************************/ @@ -291,18 +190,17 @@ static void __init netspace_v2_init(void) kirkwood_init(); kirkwood_mpp_conf(netspace_v2_mpp_config); - netspace_v2_sata_power_init(); + if (machine_is_netspace_max_v2()) + lacie_v2_hdd_power_init(2); + else + lacie_v2_hdd_power_init(1); kirkwood_ehci_init(); kirkwood_ge00_init(&netspace_v2_ge00_data); kirkwood_sata_init(&netspace_v2_sata_data); kirkwood_uart0_init(); - spi_register_board_info(netspace_v2_spi_slave_info, - ARRAY_SIZE(netspace_v2_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_i2c_init(); - i2c_register_board_info(0, netspace_v2_i2c_info, - ARRAY_SIZE(netspace_v2_i2c_info)); + lacie_v2_register_flash(); + lacie_v2_register_i2c_devices(); platform_device_register(&netspace_v2_leds); platform_device_register(&netspace_v2_gpio_leds); @@ -317,36 +215,30 @@ static void __init netspace_v2_init(void) #ifdef CONFIG_MACH_NETSPACE_V2 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netspace_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif #ifdef CONFIG_MACH_INETSPACE_V2 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netspace_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif #ifdef CONFIG_MACH_NETSPACE_MAX_V2 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netspace_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index 2bd14c5079d..a1b45d501ae 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -23,55 +23,19 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/i2c/at24.h> #include <linux/input.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> #include <mach/kirkwood.h> -#include <plat/time.h> +#include <mach/leds-netxbig.h> #include "common.h" #include "mpp.h" - -/***************************************************************************** - * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) - ****************************************************************************/ - -static struct mtd_partition netxbig_v2_flash_parts[] = { - { - .name = "u-boot", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static const struct flash_platform_data netxbig_v2_flash = { - .type = "mx25l4005a", - .name = "spi_flash", - .parts = netxbig_v2_flash_parts, - .nr_parts = ARRAY_SIZE(netxbig_v2_flash_parts), -}; - -static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &netxbig_v2_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; +#include "lacie_v2-common.h" /***************************************************************************** * Ethernet @@ -86,27 +50,6 @@ static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = { }; /***************************************************************************** - * I2C devices - ****************************************************************************/ - -static struct at24_platform_data at24c04 = { - .byte_len = SZ_4K / 8, - .page_size = 16, -}; - -/* - * i2c addr | chip | description - * 0x50 | HT24LC04 | eeprom (512B) - */ - -static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = { - { - I2C_BOARD_INFO("24c04", 0x50), - .platform_data = &at24c04, - } -}; - -/***************************************************************************** * SATA ****************************************************************************/ @@ -114,34 +57,6 @@ static struct mv_sata_platform_data netxbig_v2_sata_data = { .n_ports = 2, }; -static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 }; - -static void __init netxbig_v2_sata_power_init(void) -{ - int i; - int err; - int hdd_nb; - - if (machine_is_net2big_v2()) - hdd_nb = 2; - else - hdd_nb = 5; - - /* Power up all hard disks. */ - for (i = 0; i < hdd_nb; i++) { - err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL); - if (err == 0) { - err = gpio_direction_output( - netxbig_v2_gpio_hdd_power[i], 1); - /* Free the HDD power GPIOs. This allow user-space to - * configure them via the gpiolib sysfs interface. */ - gpio_free(netxbig_v2_gpio_hdd_power[i]); - } - if (err) - pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1); - } -} - /***************************************************************************** * GPIO keys ****************************************************************************/ @@ -190,7 +105,7 @@ static struct platform_device netxbig_v2_gpio_buttons = { }; /***************************************************************************** - * GPIO LEDs + * GPIO extension LEDs ****************************************************************************/ /* @@ -200,19 +115,32 @@ static struct platform_device netxbig_v2_gpio_buttons = { * - address register : bit [0-2] -> GPIO [47-49] * - data register : bit [0-2] -> GPIO [44-46] * - enable register : GPIO 29 - * + */ + +static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; +static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; + +static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { + .addr = netxbig_v2_gpio_ext_addr, + .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), + .data = netxbig_v2_gpio_ext_data, + .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), + .enable = 29, +}; + +/* * Address register selection: * * addr | register * ---------------------------- * 0 | front LED * 1 | front LED brightness - * 2 | HDD LED brightness - * 3 | HDD1 LED - * 4 | HDD2 LED - * 5 | HDD3 LED - * 6 | HDD4 LED - * 7 | HDD5 LED + * 2 | SATA LED brightness + * 3 | SATA0 LED + * 4 | SATA1 LED + * 5 | SATA2 LED + * 6 | SATA3 LED + * 7 | SATA4 LED * * Data register configuration: * @@ -233,30 +161,107 @@ static struct platform_device netxbig_v2_gpio_buttons = { * 6 | blink blue on=1 sec and red on=1 sec * 7 | blink blue on=0.5 sec and blue off=2.5 sec * - * data | HDD LED mode + * data | SATA LED mode * ------------------------------------------------- - * 0 | fix blue on + * 0 | fix off * 1 | SATA activity blink * 2 | fix red on * 3 | blink blue on=1 sec and blue off=1 sec * 4 | blink red on=1 sec and red off=1 sec * 5 | blink blue on=2.5 sec and red on=0.5 sec * 6 | blink blue on=1 sec and red on=1 sec - * 7 | blink blue on=0.5 sec and blue off=2.5 sec + * 7 | fix blue on */ -/***************************************************************************** - * Timer - ****************************************************************************/ +static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 2, + [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, + [NETXBIG_LED_TIMER1] = 4, + [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, +}; -static void netxbig_v2_timer_init(void) -{ - kirkwood_tclk = 166666667; - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} +static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 1, + [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, + [NETXBIG_LED_TIMER1] = 3, + [NETXBIG_LED_TIMER2] = 7, +}; + +static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 7, + [NETXBIG_LED_SATA] = 1, + [NETXBIG_LED_TIMER1] = 3, + [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, +}; + +static struct netxbig_led_timer netxbig_v2_led_timer[] = { + [0] = { + .delay_on = 500, + .delay_off = 500, + .mode = NETXBIG_LED_TIMER1, + }, + [1] = { + .delay_on = 500, + .delay_off = 1000, + .mode = NETXBIG_LED_TIMER2, + }, +}; + +#define NETXBIG_LED(_name, maddr, mval, baddr) \ + { .name = _name, \ + .mode_addr = maddr, \ + .mode_val = mval, \ + .bright_addr = baddr } + +static struct netxbig_led net2big_v2_leds_ctrl[] = { + NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), + NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), + NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), + NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), +}; + +static struct netxbig_led_platform_data net2big_v2_leds_data = { + .gpio_ext = &netxbig_v2_gpio_ext, + .timer = netxbig_v2_led_timer, + .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), + .leds = net2big_v2_leds_ctrl, + .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), +}; + +static struct netxbig_led net5big_v2_leds_ctrl[] = { + NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), + NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), + NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2), +}; -struct sys_timer netxbig_v2_timer = { - .init = netxbig_v2_timer_init, +static struct netxbig_led_platform_data net5big_v2_leds_data = { + .gpio_ext = &netxbig_v2_gpio_ext, + .timer = netxbig_v2_led_timer, + .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), + .leds = net5big_v2_leds_ctrl, + .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), +}; + +static struct platform_device netxbig_v2_leds = { + .name = "leds-netxbig", + .id = -1, + .dev = { + .platform_data = &net2big_v2_leds_data, + }, }; /***************************************************************************** @@ -284,18 +289,18 @@ static unsigned int net2big_v2_mpp_config[] __initdata = { MPP24_GPIO, /* USB mode select */ MPP26_GPIO, /* USB device vbus */ MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* CPLD extension ALE */ + MPP29_GPIO, /* GPIO extension ALE */ MPP34_GPIO, /* Rear Push button */ MPP35_GPIO, /* Inhibit switch power-off */ MPP36_GPIO, /* SATA HDD1 presence */ MPP37_GPIO, /* SATA HDD2 presence */ MPP40_GPIO, /* eSATA presence */ - MPP44_GPIO, /* CPLD extension (data 0) */ - MPP45_GPIO, /* CPLD extension (data 1) */ - MPP46_GPIO, /* CPLD extension (data 2) */ - MPP47_GPIO, /* CPLD extension (addr 0) */ - MPP48_GPIO, /* CPLD extension (addr 1) */ - MPP49_GPIO, /* CPLD extension (addr 2) */ + MPP44_GPIO, /* GPIO extension (data 0) */ + MPP45_GPIO, /* GPIO extension (data 1) */ + MPP46_GPIO, /* GPIO extension (data 2) */ + MPP47_GPIO, /* GPIO extension (addr 0) */ + MPP48_GPIO, /* GPIO extension (addr 1) */ + MPP49_GPIO, /* GPIO extension (addr 2) */ 0 }; @@ -324,7 +329,7 @@ static unsigned int net5big_v2_mpp_config[] __initdata = { MPP26_GE1_RXD2, MPP27_GE1_RXD3, MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* CPLD extension ALE */ + MPP29_GPIO, /* GPIO extension ALE */ MPP30_GE1_RXCTL, MPP31_GE1_RXCLK, MPP32_GE1_TCLKOUT, @@ -339,12 +344,12 @@ static unsigned int net5big_v2_mpp_config[] __initdata = { MPP41_GPIO, /* SATA HDD3 power */ MPP42_GPIO, /* SATA HDD4 power */ MPP43_GPIO, /* SATA HDD5 power */ - MPP44_GPIO, /* CPLD extension (data 0) */ - MPP45_GPIO, /* CPLD extension (data 1) */ - MPP46_GPIO, /* CPLD extension (data 2) */ - MPP47_GPIO, /* CPLD extension (addr 0) */ - MPP48_GPIO, /* CPLD extension (addr 1) */ - MPP49_GPIO, /* CPLD extension (addr 2) */ + MPP44_GPIO, /* GPIO extension (data 0) */ + MPP45_GPIO, /* GPIO extension (data 1) */ + MPP46_GPIO, /* GPIO extension (data 2) */ + MPP47_GPIO, /* GPIO extension (addr 0) */ + MPP48_GPIO, /* GPIO extension (addr 1) */ + MPP49_GPIO, /* GPIO extension (addr 2) */ 0 }; @@ -366,7 +371,10 @@ static void __init netxbig_v2_init(void) else kirkwood_mpp_conf(net5big_v2_mpp_config); - netxbig_v2_sata_power_init(); + if (machine_is_net2big_v2()) + lacie_v2_hdd_power_init(2); + else + lacie_v2_hdd_power_init(5); kirkwood_ehci_init(); kirkwood_ge00_init(&netxbig_v2_ge00_data); @@ -374,13 +382,12 @@ static void __init netxbig_v2_init(void) kirkwood_ge01_init(&netxbig_v2_ge01_data); kirkwood_sata_init(&netxbig_v2_sata_data); kirkwood_uart0_init(); - spi_register_board_info(netxbig_v2_spi_slave_info, - ARRAY_SIZE(netxbig_v2_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_i2c_init(); - i2c_register_board_info(0, netxbig_v2_i2c_info, - ARRAY_SIZE(netxbig_v2_i2c_info)); + lacie_v2_register_flash(); + lacie_v2_register_i2c_devices(); + if (machine_is_net5big_v2()) + netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; + platform_device_register(&netxbig_v2_leds); platform_device_register(&netxbig_v2_gpio_buttons); if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 && @@ -392,24 +399,20 @@ static void __init netxbig_v2_init(void) #ifdef CONFIG_MACH_NET2BIG_V2 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netxbig_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif #ifdef CONFIG_MACH_NET5BIG_V2 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &netxbig_v2_timer, + .timer = &lacie_v2_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index fd06be61881..c9d77fad10a 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -16,6 +16,7 @@ #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/i2c.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> @@ -57,7 +58,22 @@ static struct mvsdio_platform_data openrd_mvsdio_data = { }; static unsigned int openrd_mpp_config[] __initdata = { + MPP12_SD_CLK, + MPP13_SD_CMD, + MPP14_SD_D0, + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + MPP28_GPIO, MPP29_GPIO, + MPP34_GPIO, + 0 +}; + +/* Configure MPP for UART1 */ +static unsigned int openrd_uart1_mpp_config[] __initdata = { + MPP13_UART1_TXD, + MPP14_UART1_RXD, 0 }; @@ -67,6 +83,68 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static int __initdata uart1; + +static int __init sd_uart_selection(char *str) +{ + uart1 = -EINVAL; + + /* Default is SD. Change if required, for UART */ + if (!str) + return 0; + + if (!strncmp(str, "232", 3)) { + uart1 = 232; + } else if (!strncmp(str, "485", 3)) { + /* OpenRD-Base doesn't have RS485. Treat is as an + * unknown argument & just have default setting - + * which is SD */ + if (machine_is_openrd_base()) { + uart1 = -ENODEV; + return 1; + } + + uart1 = 485; + } + return 1; +} +/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */ +__setup("kw_openrd_init_uart1=", sd_uart_selection); + +static int __init uart1_mpp_config(void) +{ + kirkwood_mpp_conf(openrd_uart1_mpp_config); + + if (gpio_request(34, "SD_UART1_SEL")) { + printk(KERN_ERR "GPIO request failed for SD/UART1 selection" + ", gpio: 34\n"); + return -EIO; + } + + if (gpio_request(28, "RS232_RS485_SEL")) { + printk(KERN_ERR "GPIO request failed for RS232/RS485 selection" + ", gpio# 28\n"); + gpio_free(34); + return -EIO; + } + + /* Select UART1 + * Pin # 34: 0 => UART1, 1 => SD */ + gpio_direction_output(34, 0); + + /* Select RS232 OR RS485 + * Pin # 28: 0 => RS232, 1 => RS485 */ + if (uart1 == 232) + gpio_direction_output(28, 0); + else + gpio_direction_output(28, 1); + + gpio_free(34); + gpio_free(28); + + return 0; +} + static void __init openrd_init(void) { /* @@ -90,7 +168,6 @@ static void __init openrd_init(void) kirkwood_ge01_init(&openrd_ge01_data); kirkwood_sata_init(&openrd_sata_data); - kirkwood_sdio_init(&openrd_mvsdio_data); kirkwood_i2c_init(); @@ -99,6 +176,28 @@ static void __init openrd_init(void) ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); } + + if (uart1 <= 0) { + if (uart1 < 0) + printk(KERN_ERR "Invalid kernel parameter to select " + "UART1. Defaulting to SD. ERROR CODE: %d\n", + uart1); + + /* Select SD + * Pin # 34: 0 => UART1, 1 => SD */ + if (gpio_request(34, "SD_UART1_SEL")) { + printk(KERN_ERR "GPIO request failed for SD/UART1 " + "selection, gpio: 34\n"); + } else { + + gpio_direction_output(34, 1); + gpio_free(34); + kirkwood_sdio_init(&openrd_mvsdio_data); + } + } else { + if (!uart1_mpp_config()) + kirkwood_uart1_init(); + } } static int __init openrd_pci_init(void) @@ -115,8 +214,6 @@ subsys_initcall(openrd_pci_init); #ifdef CONFIG_MACH_OPENRD_BASE MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, @@ -128,8 +225,6 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_CLIENT MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, @@ -141,8 +236,6 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_ULTIMATE MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = openrd_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index c34718c2cfe..0049614cd32 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -79,8 +79,6 @@ subsys_initcall(rd88f6192_pci_init); MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = rd88f6192_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 3d1477135e1..0998a08cf42 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -115,8 +115,6 @@ subsys_initcall(rd88f6281_pci_init); MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = rd88f6281_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index a00879d34d5..d2eec35dfe0 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -131,8 +131,6 @@ static void __init sheevaplug_init(void) #ifdef CONFIG_MACH_SHEEVAPLUG MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") /* Maintainer: shadi Ammouri <shadi@marvell.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, @@ -143,8 +141,6 @@ MACHINE_END #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index d01bf89cedb..ce50e61aac9 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -184,8 +184,6 @@ subsys_initcall(hp_t5325_pci_init); MACHINE_START(T5325, "HP t5325 Thin Client") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = hp_t5325_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index a5bd7fde04a..6710bd7773b 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -120,8 +120,6 @@ subsys_initcall(ts219_pci_init); MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = qnap_ts219_init, .map_io = kirkwood_map_io, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 2e14afef07a..8be09a0ce4a 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -149,8 +149,6 @@ subsys_initcall(ts41x_pci_init); MACHINE_START(TS41X, "QNAP TS-41x") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = qnap_ts41x_init, .map_io = kirkwood_map_io, |