diff options
Diffstat (limited to 'arch/arm/mach-kirkwood')
23 files changed, 39 insertions, 124 deletions
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c index f2fbb023e67..6912882b0aa 100644 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -16,21 +16,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 20af53a56c0..8a8ebe09e51 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -13,23 +13,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d94872fed8c..e75fbdb533d 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -26,7 +26,7 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { { } }; -struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { +static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), @@ -98,7 +98,7 @@ static void __init kirkwood_dt_init(void) kirkwood_auxdata_lookup, NULL); } -static const char *kirkwood_dt_board_compat[] = { +static const char * const kirkwood_dt_board_compat[] = { "globalscale,dreamplug", "dlink,dns-320", "dlink,dns-325", diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c index 001ca8c9698..5dcd0d62aa4 100644 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -18,21 +18,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index cfc47f80e73..6d3a5642114 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -13,15 +13,9 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index d084b1e2943..24f5aa7f698 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -10,16 +10,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c index 158fb97d039..e4ed62c28f5 100644 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -10,10 +10,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 83d8975592f..64e5cc6b6d5 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -14,17 +14,9 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/gpio-fan.h> -#include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 1750e68506c..f3bfedae3a2 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -19,9 +19,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 2c6c218fb79..f0fc25bd3ff 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -18,10 +18,10 @@ #include <linux/clk-provider.h> #include <linux/spinlock.h> #include <linux/mv643xx_i2c.h> +#include <linux/timex.h> +#include <linux/kexec.h> #include <net/dsa.h> #include <asm/page.h> -#include <asm/timex.h> -#include <asm/kexec.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/kirkwood.h> @@ -425,7 +425,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) /***************************************************************************** * SPI ****************************************************************************/ -void __init kirkwood_spi_init() +void __init kirkwood_spi_init(void) { orion_spi_init(SPI_PHYS_BASE); } @@ -646,8 +646,7 @@ void __init kirkwood_l2_init(void) void __init kirkwood_init(void) { - printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", - kirkwood_id(), kirkwood_tclk); + pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); /* * Disable propagation of mbus errors to the CPU local bus, @@ -671,7 +670,7 @@ void __init kirkwood_init(void) kirkwood_xor1_init(); kirkwood_crypto_init(); -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; #endif } diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index bcffd7ca1ca..6088e922788 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -47,7 +47,8 @@ void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); -void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); +void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, + int (*dev_ready)(struct mtd_info *)); void kirkwood_audio_init(void); void kirkwood_restart(char, const char *); void kirkwood_clk_init(void); diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index 0f171094187..f7304670f2f 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void) cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { - printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); + pr_err("kirkwood_init_cpuidle: Failed registering\n"); return -EIO; } return 0; diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index 23dcb19cc2a..791a98fafa2 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -93,7 +93,7 @@ static void __init dockstar_init(void) if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) - printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); kirkwood_ehci_init(); kirkwood_ge00_init(&dockstar_ge00_data); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 884703535a0..2a97a2e4163 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -14,6 +14,7 @@ #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include "common.h" static int __initdata gpio0_irqs[4] = { IRQ_KIRKWOOD_GPIO_LOW_0_7, diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c index 285edab776e..489495976fc 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -19,6 +19,7 @@ #include <mach/irqs.h> #include <plat/time.h> #include "common.h" +#include "lacie_v2-common.h" /***************************************************************************** * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 0c6ad63f10c..827cde42414 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void) if (dev == MV88F6180_DEV_ID) return MPP_F6180_MASK; - printk(KERN_ERR "MPP setup: unknown kirkwood variant " - "(dev %#x rev %#x)\n", dev, rev); + pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n", + dev, rev); return 0; } diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 88b0788baca..728e86d33f0 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = { .name = "gpio-keys", .id = -1, .dev = { - .platform_data = &netspace_v2_button_data, + .platform_data = &netspace_v2_button_data, }, }; @@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = { MPP29_GPIO, /* Blue led (slow register) */ MPP30_GPIO, /* Blue led (command register) */ MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ MPP33_GPO, /* Fan speed (bit 2) */ 0 }; diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 134ef50d58f..7e81e9b586b 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void) kirkwood_mpp_conf(openrd_uart1_mpp_config); if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 selection" - ", gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); return -EIO; } if (gpio_request(28, "RS232_RS485_SEL")) { - printk(KERN_ERR "GPIO request failed for RS232/RS485 selection" - ", gpio# 28\n"); + pr_err("GPIO request 28 failed for RS232/RS485 selection\n"); gpio_free(34); return -EIO; } @@ -185,15 +183,13 @@ static void __init openrd_init(void) if (uart1 <= 0) { if (uart1 < 0) - printk(KERN_ERR "Invalid kernel parameter to select " - "UART1. Defaulting to SD. ERROR CODE: %d\n", - uart1); + pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n", + uart1); /* Select SD * Pin # 34: 0 => UART1, 1 => SD */ if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 " - "selection, gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); } else { gpio_direction_output(34, 1); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 74fc5a074fc..ef102646ba9 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port) clk = clk_get_sys("pcie", port); if (IS_ERR(clk)) { - printk(KERN_ERR "PCIE clock %s missing\n", port); + pr_err("PCIE clock %s missing\n", port); return; } clk_prepare_enable(clk); @@ -168,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 0; index = pcie_port_map[nr]; - printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index); + pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index); pp = kzalloc(sizeof(*pp), GFP_KERNEL); if (!pp) @@ -186,7 +186,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) case 1: kirkwood_enable_pcie_clk("1"); pcie1_ioresources_init(pp); - pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE); + pci_ioremap_io(SZ_64K * sys->busnr, + KIRKWOOD_PCIE1_IO_PHYS_BASE); break; default: panic("PCIe setup: invalid controller %d", index); @@ -229,22 +230,6 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); -static struct pci_bus __init * -kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_bus *bus; - - if (nr < num_pcie_ports) { - bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, - &sys->resources); - } else { - bus = NULL; - BUG(); - } - - return bus; -} - static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -256,19 +241,19 @@ static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, static struct hw_pci kirkwood_pci __initdata = { .setup = kirkwood_pcie_setup, - .scan = kirkwood_pcie_scan_bus, .map_irq = kirkwood_pcie_map_irq, + .ops = &pcie_ops, }; static void __init add_pcie_port(int index, void __iomem *base) { - printk(KERN_INFO "Kirkwood PCIe port %d: ", index); + pr_info("Kirkwood PCIe port %d: ", index); if (orion_pcie_link_up(base)) { - printk(KERN_INFO "link up\n"); + pr_info("link up\n"); pcie_port_map[num_pcie_ports++] = index; } else - printk(KERN_INFO "link down, ignoring\n"); + pr_info("link down, ignoring\n"); } void __init kirkwood_pcie_init(unsigned int portmask) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 28d0abaf4bd..8a175948b28 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -117,7 +117,7 @@ static void __init sheevaplug_init(void) if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) - printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); kirkwood_ehci_init(); kirkwood_ge00_init(&sheevaplug_ge00_data); diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index bad738e4404..f2daf711e72 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -29,7 +29,7 @@ #include "common.h" #include "mpp.h" -struct mtd_partition hp_t5325_partitions[] = { +static struct mtd_partition hp_t5325_partitions[] = { { .name = "u-boot env", .size = SZ_64K, @@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = { }, }; -const struct flash_platform_data hp_t5325_flash = { +static const struct flash_platform_data hp_t5325_flash = { .type = "mx25l8005", .name = "spi_flash", .parts = hp_t5325_partitions, .nr_parts = ARRAY_SIZE(hp_t5325_partitions), }; -struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { +static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &hp_t5325_flash, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 367a9400f53..e4c61279ea8 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -170,8 +170,7 @@ static int __init ts41x_pci_init(void) else kirkwood_pcie_init(KW_PCIE0); } - - return 0; + return 0; } subsys_initcall(ts41x_pci_init); diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index 8943ede29b4..cec87cef76c 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -7,6 +7,7 @@ #include <linux/serial_reg.h> #include <mach/kirkwood.h> #include "common.h" +#include "tsx1x-common.h" /* * QNAP TS-x1x Boards flash @@ -29,7 +30,7 @@ * ***************************************************************************/ -struct mtd_partition qnap_tsx1x_partitions[] = { +static struct mtd_partition qnap_tsx1x_partitions[] = { { .name = "U-Boot", .size = 0x00080000, @@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = { }, }; -const struct flash_platform_data qnap_tsx1x_flash = { +static const struct flash_platform_data qnap_tsx1x_flash = { .type = "m25p128", .name = "spi_flash", .parts = qnap_tsx1x_partitions, .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions), }; -struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { +static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &qnap_tsx1x_flash, |