diff options
Diffstat (limited to 'arch/arm/mach-kirkwood')
22 files changed, 54 insertions, 62 deletions
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 67039c3e0c4..760a0efe758 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,3 +1,3 @@ - zreladdr-y := 0x00008000 + zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index f68d33f1f39..7088180b018 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/cpuidle.h> #include <linux/io.h> +#include <linux/export.h> #include <asm/proc-fns.h> #include <mach/kirkwood.h> @@ -32,17 +33,18 @@ static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); /* Actual code that puts the SoC in different idle states */ static int kirkwood_enter_idle(struct cpuidle_device *dev, - struct cpuidle_state *state) + struct cpuidle_driver *drv, + int index) { struct timeval before, after; int idle_time; local_irq_disable(); do_gettimeofday(&before); - if (state == &dev->states[0]) + if (index == 0) /* Wait for interrupt state */ cpu_do_idle(); - else if (state == &dev->states[1]) { + else if (index == 1) { /* * Following write will put DDR in self refresh. * Note that we have 256 cycles before DDR puts it @@ -57,35 +59,40 @@ static int kirkwood_enter_idle(struct cpuidle_device *dev, local_irq_enable(); idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + (after.tv_usec - before.tv_usec); - return idle_time; + + /* Update last residency */ + dev->last_residency = idle_time; + + return index; } /* Initialize CPU idle by registering the idle states */ static int kirkwood_init_cpuidle(void) { struct cpuidle_device *device; - - cpuidle_register_driver(&kirkwood_idle_driver); + struct cpuidle_driver *driver = &kirkwood_idle_driver; device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); device->state_count = KIRKWOOD_MAX_STATES; + driver->state_count = KIRKWOOD_MAX_STATES; /* Wait for interrupt state */ - device->states[0].enter = kirkwood_enter_idle; - device->states[0].exit_latency = 1; - device->states[0].target_residency = 10000; - device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(device->states[0].name, "WFI"); - strcpy(device->states[0].desc, "Wait for interrupt"); + driver->states[0].enter = kirkwood_enter_idle; + driver->states[0].exit_latency = 1; + driver->states[0].target_residency = 10000; + driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(driver->states[0].name, "WFI"); + strcpy(driver->states[0].desc, "Wait for interrupt"); /* Wait for interrupt and DDR self refresh state */ - device->states[1].enter = kirkwood_enter_idle; - device->states[1].exit_latency = 10; - device->states[1].target_residency = 10000; - device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(device->states[1].name, "DDR SR"); - strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + driver->states[1].enter = kirkwood_enter_idle; + driver->states[1].exit_latency = 10; + driver->states[1].target_residency = 10000; + driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(driver->states[1].name, "DDR SR"); + strcpy(driver->states[1].desc, "WFI and DDR Self Refresh"); + cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); return -EIO; diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index 043cfd5e140..f457e07a65f 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -221,7 +221,7 @@ static void __init d2net_v2_init(void) } MACHINE_START(D2NET_V2, "LaCie d2 Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = d2net_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index bff04e04d67..ff4c21c1f92 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -97,7 +97,7 @@ subsys_initcall(db88f6281_pci_init); MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = db88f6281_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index f14dfb8508c..e4d199b2b1e 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -102,7 +102,7 @@ static void __init dockstar_init(void) } MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = dockstar_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 41d1b40696a..6c40f784b51 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -121,7 +121,7 @@ static void __init guruplug_init(void) MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") /* Maintainer: Siddarth Gore <gores@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = guruplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index db06ae437d0..f785d401a60 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -8,7 +8,7 @@ #include <mach/bridge-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =KIRKWOOD_REGS_PHYS_BASE ldr \rv, =KIRKWOOD_REGS_VIRT_BASE orr \rp, \rp, #0x00012000 diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h index cde85283f7d..742b74f43e4 100644 --- a/arch/arm/mach-kirkwood/include/mach/hardware.h +++ b/arch/arm/mach-kirkwood/include/mach/hardware.h @@ -11,11 +11,4 @@ #include "kirkwood.h" -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */ - - #endif diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h deleted file mode 100644 index 4600b44e3ad..00000000000 --- a/arch/arm/mach-kirkwood/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 05d193a25b2..c4c68e5b94f 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,14 +7,13 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/irq.h> -#include <asm/gpio.h> #include "common.h" static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index b0a7d979a8e..cc431fa22cc 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -7,12 +7,11 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ - +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/hardware.h> #include <plat/mpp.h> #include "common.h" diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 00cca22eca6..9a1e917352f 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -163,7 +163,7 @@ subsys_initcall(mv88f6281gtw_ge_pci_init); MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = mv88f6281gtw_ge_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 7cdab577645..8849bcc7328 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -258,7 +258,7 @@ static void __init netspace_v2_init(void) #ifdef CONFIG_MACH_NETSPACE_V2 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -269,7 +269,7 @@ MACHINE_END #ifdef CONFIG_MACH_INETSPACE_V2 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -280,7 +280,7 @@ MACHINE_END #ifdef CONFIG_MACH_NETSPACE_MAX_V2 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index 6be627deb0f..1ba12c4dff8 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -399,7 +399,7 @@ static void __init netxbig_v2_init(void) #ifdef CONFIG_MACH_NET2BIG_V2 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -410,7 +410,7 @@ MACHINE_END #ifdef CONFIG_MACH_NET5BIG_V2 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index f69beeff445..5660ca6c3d8 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -214,7 +214,7 @@ subsys_initcall(openrd_pci_init); #ifdef CONFIG_MACH_OPENRD_BASE MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -226,7 +226,7 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_CLIENT MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -238,7 +238,7 @@ MACHINE_END #ifdef CONFIG_MACH_OPENRD_ULTIMATE MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = openrd_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ca294ff6d5b..74b992d810e 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -12,6 +12,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> @@ -244,7 +245,8 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) return bus; } -static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { struct pcie_port *pp = bus_to_port(dev->bus); @@ -271,6 +273,8 @@ static void __init add_pcie_port(int index, unsigned long base) void __init kirkwood_pcie_init(unsigned int portmask) { + vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE; + if (portmask & KW_PCIE0) add_pcie_port(0, PCIE_VIRT_BASE); diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 75c6601b8d8..6663869773a 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -79,7 +79,7 @@ subsys_initcall(rd88f6192_pci_init); MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f6192_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 0f75494d590..66b3c05e37a 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -115,7 +115,7 @@ subsys_initcall(rd88f6281_pci_init); MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = rd88f6281_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 17de0bf53c0..8b102d62e82 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -138,7 +138,7 @@ static void __init sheevaplug_init(void) #ifdef CONFIG_MACH_SHEEVAPLUG MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") /* Maintainer: shadi Ammouri <shadi@marvell.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, @@ -149,7 +149,7 @@ MACHINE_END #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = sheevaplug_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index e6b9b1b22a3..ea104fb5ec3 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -201,7 +201,7 @@ subsys_initcall(hp_t5325_pci_init); MACHINE_START(T5325, "HP t5325 Thin Client") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = hp_t5325_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 68f32f2bf55..262c034836d 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -132,7 +132,7 @@ subsys_initcall(ts219_pci_init); MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts219_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index d5d00997070..b68f5b4a9ec 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -176,7 +176,7 @@ subsys_initcall(ts41x_pci_init); MACHINE_START(TS41X, "QNAP TS-41x") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .boot_params = 0x00000100, + .atag_offset = 0x100, .init_machine = qnap_ts41x_init, .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, |