summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-kirkwood
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-kirkwood')
-rw-r--r--arch/arm/mach-kirkwood/Kconfig23
-rw-r--r--arch/arm/mach-kirkwood/Makefile4
-rw-r--r--arch/arm/mach-kirkwood/common.c8
-rw-r--r--arch/arm/mach-kirkwood/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-kirkwood/include/mach/vmalloc.h2
-rw-r--r--arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c4
-rw-r--r--arch/arm/mach-kirkwood/netspace_v2-setup.c59
-rw-r--r--arch/arm/mach-kirkwood/openrd-setup.c118
-rw-r--r--arch/arm/mach-kirkwood/openrd_base-setup.c96
-rw-r--r--arch/arm/mach-kirkwood/pcie.c1
-rw-r--r--arch/arm/mach-kirkwood/rd88f6192-nas-setup.c6
-rw-r--r--arch/arm/mach-kirkwood/sheevaplug-setup.c50
12 files changed, 241 insertions, 132 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f6c6196a51f..17879a876be 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -32,6 +32,12 @@ config MACH_SHEEVAPLUG
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
+config MACH_ESATA_SHEEVAPLUG
+ bool "Marvell eSATA SheevaPlug Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell eSATA SheevaPlug Reference Board.
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
help
@@ -46,18 +52,35 @@ config MACH_TS41X
QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
devices.
+config MACH_OPENRD
+ bool
+
config MACH_OPENRD_BASE
bool "Marvell OpenRD Base Board"
+ select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Base Board.
+config MACH_OPENRD_CLIENT
+ bool "Marvell OpenRD Client Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Client Board.
+
config MACH_NETSPACE_V2
bool "LaCie Network Space v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space v2 NAS.
+config MACH_INETSPACE_V2
+ bool "LaCie Internet Space v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Internet Space v2 NAS.
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d4d7f53b0fb..a5530e36ba3 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,9 +5,11 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
+obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o
+obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 242dd077534..f759ca24392 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -656,7 +656,7 @@ static struct platform_device kirkwood_xor00_channel = {
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&kirkwood_xor00_data,
+ .platform_data = &kirkwood_xor00_data,
},
};
@@ -682,7 +682,7 @@ static struct platform_device kirkwood_xor01_channel = {
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&kirkwood_xor01_data,
+ .platform_data = &kirkwood_xor01_data,
},
};
@@ -755,7 +755,7 @@ static struct platform_device kirkwood_xor10_channel = {
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&kirkwood_xor10_data,
+ .platform_data = &kirkwood_xor10_data,
},
};
@@ -781,7 +781,7 @@ static struct platform_device kirkwood_xor11_channel = {
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&kirkwood_xor11_data,
+ .platform_data = &kirkwood_xor11_data,
},
};
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index a4a55c199d7..d0606774dea 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
index 8f48260dcda..bf162ca3d2c 100644
--- a/arch/arm/mach-kirkwood/include/mach/vmalloc.h
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-kirkwood/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfe800000
+#define VMALLOC_END 0xfe800000UL
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 0358f45766c..5e6f711b1c6 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -74,9 +74,9 @@ static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
.desc = "SWR Button",
.active_low = 1,
}, {
- .code = KEY_F1,
+ .code = KEY_WPS_BUTTON,
.gpio = 46,
- .desc = "WPS Button(F1)",
+ .desc = "WPS Button",
.active_low = 1,
},
};
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 9a064065beb..3ae158d7268 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -182,8 +182,14 @@ static struct platform_device netspace_v2_gpio_buttons = {
static struct gpio_led netspace_v2_gpio_led_pins[] = {
{
- .name = "ns_v2:red:fail",
- .gpio = NETSPACE_V2_GPIO_RED_LED,
+ .name = "ns_v2:blue:sata",
+ .default_trigger = "default-on",
+ .gpio = NETSPACE_V2_GPIO_BLUE_LED_CMD,
+ .active_low = 1,
+ },
+ {
+ .name = "ns_v2:red:fail",
+ .gpio = NETSPACE_V2_GPIO_RED_LED,
},
};
@@ -202,30 +208,19 @@ static struct platform_device netspace_v2_gpio_leds = {
static void __init netspace_v2_gpio_leds_init(void)
{
- platform_device_register(&netspace_v2_gpio_leds);
+ int err;
- /*
- * Configure the front blue LED to blink in relation with the SATA
- * activity.
- */
- if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
- "SATA blue LED slow") != 0)
- return;
- if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
- goto err_free_1;
- if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
- "SATA blue LED command") != 0)
- goto err_free_1;
- if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
- goto err_free_2;
-
- return;
-
-err_free_2:
- gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
-err_free_1:
- gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
- pr_err("netspace_v2: failed to configure SATA blue LED\n");
+ /* Configure register slow_led to allow SATA activity LED blinking */
+ err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
+ if (err == 0) {
+ err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
+ if (err)
+ gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+ }
+ if (err)
+ pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+
+ platform_device_register(&netspace_v2_gpio_leds);
}
/*****************************************************************************
@@ -314,6 +309,7 @@ static void __init netspace_v2_init(void)
pr_err("netspace_v2: failed to configure power-off GPIO\n");
}
+#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
@@ -323,3 +319,16 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.init_irq = kirkwood_init_irq,
.timer = &netspace_v2_timer,
MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = netspace_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &netspace_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
new file mode 100644
index 00000000000..ad3f1ec3379
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+ .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+ MPP29_GPIO,
+ 0
+};
+
+static void __init openrd_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(openrd_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&openrd_ge00_data);
+ if (machine_is_openrd_client())
+ kirkwood_ge01_init(&openrd_ge01_data);
+ kirkwood_sata_init(&openrd_sata_data);
+ kirkwood_sdio_init(&openrd_mvsdio_data);
+
+ kirkwood_i2c_init();
+}
+
+static int __init openrd_pci_init(void)
+{
+ if (machine_is_openrd_base() || machine_is_openrd_client())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
deleted file mode 100644
index 77617c72229..00000000000
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd_base-setup.c
- *
- * Marvell OpenRD Base Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_base_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data openrd_base_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data openrd_base_mvsdio_data = {
- .gpio_card_detect = 29, /* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_base_mpp_config[] __initdata = {
- MPP29_GPIO,
- 0
-};
-
-static void __init openrd_base_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(openrd_base_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
-
- kirkwood_ehci_init();
-
- kirkwood_ge00_init(&openrd_base_ge00_data);
- kirkwood_sata_init(&openrd_base_sata_data);
- kirkwood_sdio_init(&openrd_base_mvsdio_data);
-
- kirkwood_i2c_init();
-}
-
-static int __init openrd_base_pci_init(void)
-{
- if (machine_is_openrd_base())
- kirkwood_pcie_init();
-
- return 0;
- }
-subsys_initcall(openrd_base_pci_init);
-
-
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
- .init_machine = openrd_base_init,
- .map_io = kirkwood_map_io,
- .init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index a604b2a701a..dee1eff50d3 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 8bf4153d084..3bf6304158f 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
@@ -53,6 +54,11 @@ static void __init rd88f6192_init(void)
*/
kirkwood_init();
+ orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+ if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+ gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+ pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6192_ge00_data);
kirkwood_sata_init(&rd88f6192_sata_data);
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index c7319eeac8b..a00879d34d5 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
@@ -42,10 +43,19 @@ static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+ .n_ports = 2,
+};
+
static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+ .gpio_write_protect = 44, /* MPP44 used as SD write protect */
+ .gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
static struct gpio_led sheevaplug_led_pins[] = {
{
.name = "plug:green:health",
@@ -74,13 +84,26 @@ static unsigned int sheevaplug_mpp_config[] __initdata = {
0
};
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP44_GPIO, /* SD Write Protect */
+ MPP47_GPIO, /* SD Card Detect */
+ MPP49_GPIO, /* LED Green */
+ 0
+};
+
static void __init sheevaplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
- kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+ /* setup gpio pin select */
+ if (machine_is_sheeva_esata())
+ kirkwood_mpp_conf(sheeva_esata_mpp_config);
+ else
+ kirkwood_mpp_conf(sheevaplug_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -91,11 +114,21 @@ static void __init sheevaplug_init(void)
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);
- kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+ /* honor lower power consumption for plugs with out eSATA */
+ if (machine_is_sheeva_esata())
+ kirkwood_sata_init(&sheeva_esata_sata_data);
+
+ /* enable sd wp and sd cd on plugs with esata */
+ if (machine_is_sheeva_esata())
+ kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+ else
+ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
platform_device_register(&sheevaplug_leds);
}
+#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +139,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = sheevaplug_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif