diff options
Diffstat (limited to 'arch/arm/mach-kirkwood')
-rw-r--r-- | arch/arm/mach-kirkwood/Kconfig | 7 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/Makefile | 4 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/board-dt.c | 113 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c | 50 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/common.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/common.h | 13 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/include/mach/timex.h | 10 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/irq.c | 37 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/pm.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/pm.h | 26 |
11 files changed, 168 insertions, 107 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index fe8319ad315..df4b26340ae 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -106,13 +106,6 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. -config MACH_MV88F6281GTW_GE_DT - bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)" - depends on ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell 88F6281 GTW GE Board (Flattened Device Tree). - endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 144b5110293..3a72c5c6e74 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,5 +1,4 @@ -obj-y += common.o pcie.o -obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o +obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o @@ -13,4 +12,3 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 78188159484..ff18ff20f71 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -19,11 +19,84 @@ #include <linux/of_platform.h> #include <linux/dma-mapping.h> #include <linux/irqchip.h> -#include <linux/kexec.h> +#include <asm/hardware/cache-feroceon-l2.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <mach/bridge-regs.h> #include <plat/common.h> -#include "common.h" +#include <plat/pcie.h> +#include "pm.h" + +static struct map_desc kirkwood_io_desc[] __initdata = { + { + .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), + .length = KIRKWOOD_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init kirkwood_map_io(void) +{ + iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); +} + +static struct resource kirkwood_cpufreq_resources[] = { + [0] = { + .start = CPU_CONTROL_PHYS, + .end = CPU_CONTROL_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_cpufreq_device = { + .name = "kirkwood-cpufreq", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), + .resource = kirkwood_cpufreq_resources, +}; + +static void __init kirkwood_cpufreq_init(void) +{ + platform_device_register(&kirkwood_cpufreq_device); +} + +static struct resource kirkwood_cpuidle_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = DDR_OPERATION_BASE, + .end = DDR_OPERATION_BASE + 3, + }, +}; + +static struct platform_device kirkwood_cpuidle = { + .name = "kirkwood_cpuidle", + .id = -1, + .resource = kirkwood_cpuidle_resource, + .num_resources = 1, +}; + +static void __init kirkwood_cpuidle_init(void) +{ + platform_device_register(&kirkwood_cpuidle); +} + +/* Temporary here since mach-mvebu has a function we can use */ +static void kirkwood_restart(enum reboot_mode mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} #define MV643XX_ETH_MAC_ADDR_LOW 0x0414 #define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 @@ -104,35 +177,35 @@ eth_fixup_skip: } } -static void __init kirkwood_dt_init(void) +/* + * Disable propagation of mbus errors to the CPU local bus, as this + * causes mbus errors (which can occur for example for PCI aborts) to + * throw CPU aborts, which we're not set up to deal with. + */ +static void __init kirkwood_disable_mbus_error_propagation(void) { - pr_info("Kirkwood: %s.\n", kirkwood_id()); + void __iomem *cpu_config; - /* - * Disable propagation of mbus errors to the CPU local bus, - * as this causes mbus errors (which can occur for example - * for PCI aborts) to throw CPU aborts, which we're not set - * up to deal with. - */ - writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + cpu_config = ioremap(CPU_CONFIG_PHYS, 4); + writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); + iounmap(cpu_config); +} - BUG_ON(mvebu_mbus_dt_init()); +static void __init kirkwood_dt_init(void) +{ + kirkwood_disable_mbus_error_propagation(); - kirkwood_l2_init(); + BUG_ON(mvebu_mbus_dt_init(false)); +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_of_init(); +#endif kirkwood_cpufreq_init(); kirkwood_cpuidle_init(); kirkwood_pm_init(); kirkwood_dt_eth_fixup(); -#ifdef CONFIG_KEXEC - kexec_reinit = kirkwood_enable_pcie; -#endif - - if (of_machine_is_compatible("marvell,mv88f6281gtw-ge")) - mv88f6281gtw_ge_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c deleted file mode 100644 index ee5eea678c1..00000000000 --- a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c - * - * Marvell 88F6281 GTW GE Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/timer.h> -#include <linux/mv643xx_eth.h> -#include <linux/ethtool.h> -#include <linux/gpio.h> -#include <net/dsa.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/kirkwood.h> -#include "common.h" - -static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { - .port_names[0] = "lan1", - .port_names[1] = "lan2", - .port_names[2] = "lan3", - .port_names[3] = "lan4", - .port_names[4] = "wan", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { - .nr_chips = 1, - .chip = &mv88f6281gtw_ge_switch_chip_data, -}; - -void __init mv88f6281gtw_ge_init(void) -{ - kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); - kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f3407a5db21..255f33a3903 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -25,10 +25,10 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/hardware/cache-feroceon-l2.h> #include <mach/kirkwood.h> #include <mach/bridge-regs.h> #include <linux/platform_data/asoc-kirkwood.h> -#include <plat/cache-feroceon-l2.h> #include <linux/platform_data/mmc-mvsdio.h> #include <linux/platform_data/mtd-orion_nand.h> #include <linux/platform_data/usb-ehci-orion.h> @@ -36,6 +36,7 @@ #include <plat/time.h> #include <linux/platform_data/dma-mv_xor.h> #include "common.h" +#include "pm.h" /* These can go away once Kirkwood uses the mvebu-mbus DT binding */ #define KIRKWOOD_MBUS_NAND_TARGET 0x01 diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 05fd648df54..832a4e2ab8d 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,19 +58,6 @@ void kirkwood_cpufreq_init(void); void kirkwood_restart(enum reboot_mode, const char *); void kirkwood_clk_init(void); -#ifdef CONFIG_PM -void kirkwood_pm_init(void); -#else -static inline void kirkwood_pm_init(void) {}; -#endif - -/* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT -void mv88f6281gtw_ge_init(void); -#else -static inline void mv88f6281gtw_ge_init(void) {}; -#endif - /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 8b9d1c9ff19..1c37082c8b3 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -14,6 +14,7 @@ #include <mach/kirkwood.h> #define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) +#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) #define CPU_CONFIG_ERROR_PROP 0x00000004 #define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) @@ -21,6 +22,7 @@ #define CPU_RESET 0x00000002 #define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) +#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) @@ -79,5 +81,6 @@ #define CGC_RESERVED (0x6 << 21) #define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118) +#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118) #endif diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h deleted file mode 100644 index c923cd169b9..00000000000 --- a/arch/arm/mach-kirkwood/include/mach/timex.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 2a97a2e4163..2c47a8ad0e2 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include <asm/exception.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> @@ -30,11 +31,47 @@ static int __initdata gpio1_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE; + +asmlinkage void +__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init kirkwood_init_irq(void) { orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(kirkwood_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-49. */ diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c index c6ab8d9303a..8e5e0329d04 100644 --- a/arch/arm/mach-kirkwood/pm.c +++ b/arch/arm/mach-kirkwood/pm.c @@ -21,15 +21,16 @@ #include "common.h" static void __iomem *ddr_operation_base; +static void __iomem *memory_pm_ctrl; static void kirkwood_low_power(void) { u32 mem_pm_ctrl; - mem_pm_ctrl = readl(MEMORY_PM_CTRL); + mem_pm_ctrl = readl(memory_pm_ctrl); /* Set peripherals to low-power mode */ - writel_relaxed(~0, MEMORY_PM_CTRL); + writel_relaxed(~0, memory_pm_ctrl); /* Set DDR in self-refresh */ writel_relaxed(0x7, ddr_operation_base); @@ -41,7 +42,7 @@ static void kirkwood_low_power(void) */ cpu_do_idle(); - writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL); + writel_relaxed(mem_pm_ctrl, memory_pm_ctrl); } static int kirkwood_suspend_enter(suspend_state_t state) @@ -69,5 +70,7 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = { void __init kirkwood_pm_init(void) { ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); + memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); + suspend_set_ops(&kirkwood_suspend_ops); } diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h new file mode 100644 index 00000000000..21e7530f368 --- /dev/null +++ b/arch/arm/mach-kirkwood/pm.h @@ -0,0 +1,26 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_KIRKWOOD_PM_H +#define __ARCH_KIRKWOOD_PM_H + +#ifdef CONFIG_PM +void kirkwood_pm_init(void); +#else +static inline void kirkwood_pm_init(void) {}; +#endif + +#endif |