6 files changed, 89 insertions, 215 deletions
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
deleted file mode 100644
index e0b3eee8383..00000000000
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-if ARCH_LPC32XX
-
-menu "Individual UART enable selections"
-
-config ARCH_LPC32XX_UART3_SELECT
-	bool "Add support for standard UART3"
-	help
-	 Adds support for standard UART 3 when the 8250 serial support
-	 is enabled.
-
-config ARCH_LPC32XX_UART4_SELECT
-	bool "Add support for standard UART4"
-	help
-	 Adds support for standard UART 4 when the 8250 serial support
-	 is enabled.
-
-config ARCH_LPC32XX_UART5_SELECT
-	bool "Add support for standard UART5"
-	default y
-	help
-	 Adds support for standard UART 5 when the 8250 serial support
-	 is enabled.
-
-config ARCH_LPC32XX_UART6_SELECT
-	bool "Add support for standard UART6"
-	help
-	 Adds support for standard UART 6 when the 8250 serial support
-	 is enabled.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
index 2cfe0ee635c..697323b5f92 100644
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -2,3 +2,4 @@
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x82000000
 
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index f6a3ffec1f4..e8d315e6db0 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -691,10 +691,21 @@ static struct clk clk_nand = {
 	.parent		= &clk_hclk,
 	.enable		= local_onoff_enable,
 	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
+	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN |
+			  LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
 	.get_rate	= local_return_parent_rate,
 };
 
+static struct clk clk_nand_mlc = {
+	.parent         = &clk_hclk,
+	.enable         = local_onoff_enable,
+	.enable_reg     = LPC32XX_CLKPWR_NAND_CLK_CTRL,
+	.enable_mask    = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN |
+			  LPC32XX_CLKPWR_NANDCLK_DMA_INT |
+			  LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC,
+	.get_rate       = local_return_parent_rate,
+};
+
 static struct clk clk_i2s0 = {
 	.parent		= &clk_hclk,
 	.enable		= local_onoff_enable,
@@ -707,7 +718,8 @@ static struct clk clk_i2s1 = {
 	.parent		= &clk_hclk,
 	.enable		= local_onoff_enable,
 	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN |
+			  LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA,
 	.get_rate	= local_return_parent_rate,
 };
 
@@ -1120,8 +1132,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
 	CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
 	CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
-	CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan),
-	CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand),
+	CLKDEV_INIT("40050000.key", NULL, &clk_kscan),
+	CLKDEV_INIT("20020000.flash", NULL, &clk_nand),
+	CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc),
 	CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
 	CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
 	CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
index 2ba6ca412be..0052e7a7617 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -3,6 +3,4 @@
 
 #include "gpio-lpc32xx.h"
 
-#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX)
-
 #endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 540106cdb9e..c1aabfcbde4 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -30,12 +30,13 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/mmci.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/clk.h>
-#include <linux/amba/pl08x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -50,9 +51,12 @@
 /*
  * Mapped GPIOLIB GPIOs
  */
-#define SPI0_CS_GPIO	LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
-#define LCD_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
-#define BKL_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define SPI0_CS_GPIO		LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+#define LCD_POWER_GPIO		LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
+#define BKL_POWER_GPIO		LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define MMC_PWR_ENABLE_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5)
+#define MMC_CD_GPIO		LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 1)
+#define MMC_WP_GPIO		LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 0)
 
 /*
  * AMBA LCD controller
@@ -158,24 +162,6 @@ static struct clcd_board lpc32xx_clcd_data = {
 /*
  * AMBA SSP (SPI)
  */
-static void phy3250_spi_cs_set(u32 control)
-{
-	gpio_set_value(SPI0_CS_GPIO, (int) control);
-}
-
-static struct pl022_config_chip spi0_chip_info = {
-	.com_mode		= INTERRUPT_TRANSFER,
-	.iface			= SSP_INTERFACE_MOTOROLA_SPI,
-	.hierarchy		= SSP_MASTER,
-	.slave_tx_disable	= 0,
-	.rx_lev_trig		= SSP_RX_4_OR_MORE_ELEM,
-	.tx_lev_trig		= SSP_TX_4_OR_MORE_EMPTY_LOC,
-	.ctrl_len		= SSP_BITS_8,
-	.wait_state		= SSP_MWIRE_WAIT_ZERO,
-	.duplex			= SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
-	.cs_control		= phy3250_spi_cs_set,
-};
-
 static struct pl022_ssp_controller lpc32xx_ssp0_data = {
 	.bus_id			= 0,
 	.num_chipselect		= 1,
@@ -188,45 +174,57 @@ static struct pl022_ssp_controller lpc32xx_ssp1_data = {
 	.enable_dma		= 0,
 };
 
-/* AT25 driver registration */
-static int __init phy3250_spi_board_register(void)
+static struct pl08x_channel_data pl08x_slave_channels[] = {
+	{
+		.bus_id = "nand-slc",
+		.min_signal = 1, /* SLC NAND Flash */
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB1,
+	},
+	{
+		.bus_id = "nand-mlc",
+		.min_signal = 12, /* MLC NAND Flash */
+		.max_signal = 12,
+		.periph_buses = PL08X_AHB1,
+	},
+};
+
+/* NOTE: These will change, according to RMK */
+static int pl08x_get_signal(struct pl08x_dma_chan *ch)
+{
+	return ch->cd->min_signal;
+}
+
+static void pl08x_put_signal(struct pl08x_dma_chan *ch)
 {
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-	static struct spi_board_info info[] = {
-		{
-			.modalias = "spidev",
-			.max_speed_hz = 5000000,
-			.bus_num = 0,
-			.chip_select = 0,
-			.controller_data = &spi0_chip_info,
-		},
-	};
-
-#else
-	static struct spi_eeprom eeprom = {
-		.name = "at25256a",
-		.byte_len = 0x8000,
-		.page_size = 64,
-		.flags = EE_ADDR2,
-	};
-
-	static struct spi_board_info info[] = {
-		{
-			.modalias = "at25",
-			.max_speed_hz = 5000000,
-			.bus_num = 0,
-			.chip_select = 0,
-			.mode = SPI_MODE_0,
-			.platform_data = &eeprom,
-			.controller_data = &spi0_chip_info,
-		},
-	};
-#endif
-	return spi_register_board_info(info, ARRAY_SIZE(info));
 }
-arch_initcall(phy3250_spi_board_register);
 
 static struct pl08x_platform_data pl08x_pd = {
+	.slave_channels = &pl08x_slave_channels[0],
+	.num_slave_channels = ARRAY_SIZE(pl08x_slave_channels),
+	.get_signal = pl08x_get_signal,
+	.put_signal = pl08x_put_signal,
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+};
+
+static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios)
+{
+	/* Only on and off are supported */
+	if (ios->power_mode == MMC_POWER_OFF)
+		gpio_set_value(MMC_PWR_ENABLE_GPIO, 0);
+	else
+		gpio_set_value(MMC_PWR_ENABLE_GPIO, 1);
+	return 0;
+}
+
+static struct mmci_platform_data lpc32xx_mmci_data = {
+	.ocr_mask	= MMC_VDD_30_31 | MMC_VDD_31_32 |
+			  MMC_VDD_32_33 | MMC_VDD_33_34,
+	.ios_handler	= mmc_handle_ios,
+	.dma_filter	= NULL,
+	/* No DMA for now since AMBA PL080 dmaengine driver only does scatter
+	 * gather, and the MMCI driver doesn't do it this way */
 };
 
 static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
@@ -234,6 +232,8 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
 	OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
 	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
+	OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
+		       &lpc32xx_mmci_data),
 	{ }
 };
 
@@ -241,10 +241,6 @@ static void __init lpc3250_machine_init(void)
 {
 	u32 tmp;
 
-	/* Setup SLC NAND controller muxing */
-	__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
-		LPC32XX_CLKPWR_NAND_CLK_CTRL);
-
 	/* Setup LCD muxing to RGB565 */
 	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
 		~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
@@ -264,34 +260,12 @@ static void __init lpc3250_machine_init(void)
 		LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
 	__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
 
-	/* Disable IrDA pulsing support on UART6 */
-	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
-	tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
-	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
-	/* Enable DMA for I2S1 channel */
-	tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
-	tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
-	__raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
-
 	lpc32xx_serial_init();
 
-	/*
-	 * AMBA peripheral clocks need to be enabled prior to AMBA device
-	 * detection or a data fault will occur, so enable the clocks
-	 * here.
-	 */
-	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
-	__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
-		LPC32XX_CLKPWR_SSP_CLK_CTRL);
-
-	tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL);
-	__raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN),
-		     LPC32XX_CLKPWR_DMA_CLK_CTRL);
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
+		LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
 
 	/* Test clock needed for UDA1380 initial init */
 	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
@@ -302,12 +276,10 @@ static void __init lpc3250_machine_init(void)
 			     lpc32xx_auxdata_lookup, NULL);
 
 	/* Register GPIOs used on this board */
-	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			SPI0_CS_GPIO);
-	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			SPI0_CS_GPIO);
+	if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en"))
+		pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO);
+	else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1))
+		pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO);
 }
 
 static char const *lpc32xx_dt_compat[] __initdata = {
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index f2735281616..05621a29fba 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -31,59 +31,6 @@
 
 #define LPC32XX_SUART_FIFO_SIZE	64
 
-/* Standard 8250/16550 compatible serial ports */
-static struct plat_serial8250_port serial_std_platform_data[] = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
-	{
-		.membase        = io_p2v(LPC32XX_UART5_BASE),
-		.mapbase        = LPC32XX_UART5_BASE,
-		.irq		= IRQ_LPC32XX_UART_IIR5,
-		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM32,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
-					UPF_SKIP_TEST,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
-	{
-		.membase	= io_p2v(LPC32XX_UART3_BASE),
-		.mapbase        = LPC32XX_UART3_BASE,
-		.irq		= IRQ_LPC32XX_UART_IIR3,
-		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM32,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
-					UPF_SKIP_TEST,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
-	{
-		.membase	= io_p2v(LPC32XX_UART4_BASE),
-		.mapbase        = LPC32XX_UART4_BASE,
-		.irq		= IRQ_LPC32XX_UART_IIR4,
-		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM32,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
-					UPF_SKIP_TEST,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
-	{
-		.membase	= io_p2v(LPC32XX_UART6_BASE),
-		.mapbase        = LPC32XX_UART6_BASE,
-		.irq		= IRQ_LPC32XX_UART_IIR6,
-		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM32,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
-					UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
 struct uartinit {
 	char *uart_ck_name;
 	u32 ck_mode_mask;
@@ -92,7 +39,6 @@ struct uartinit {
 };
 
 static struct uartinit uartinit_data[] __initdata = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
 	{
 		.uart_ck_name = "uart5_ck",
 		.ck_mode_mask =
@@ -100,8 +46,6 @@ static struct uartinit uartinit_data[] __initdata = {
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
 		.mapbase = LPC32XX_UART5_BASE,
 	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
 	{
 		.uart_ck_name = "uart3_ck",
 		.ck_mode_mask =
@@ -109,8 +53,6 @@ static struct uartinit uartinit_data[] __initdata = {
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
 		.mapbase = LPC32XX_UART3_BASE,
 	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
 	{
 		.uart_ck_name = "uart4_ck",
 		.ck_mode_mask =
@@ -118,8 +60,6 @@ static struct uartinit uartinit_data[] __initdata = {
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
 		.mapbase = LPC32XX_UART4_BASE,
 	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
 	{
 		.uart_ck_name = "uart6_ck",
 		.ck_mode_mask =
@@ -127,19 +67,6 @@ static struct uartinit uartinit_data[] __initdata = {
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
 		.mapbase = LPC32XX_UART6_BASE,
 	},
-#endif
-};
-
-static struct platform_device serial_std_platform_device = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= serial_std_platform_data,
-	},
-};
-
-static struct platform_device *lpc32xx_serial_devs[] __initdata = {
-	&serial_std_platform_device,
 };
 
 void __init lpc32xx_serial_init(void)
@@ -156,15 +83,8 @@ void __init lpc32xx_serial_init(void)
 		clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
 		if (!IS_ERR(clk)) {
 			clk_enable(clk);
-			serial_std_platform_data[i].uartclk =
-				clk_get_rate(clk);
 		}
 
-		/* Fall back on main osc rate if clock rate return fails */
-		if (serial_std_platform_data[i].uartclk == 0)
-			serial_std_platform_data[i].uartclk =
-				LPC32XX_MAIN_OSC_FREQ;
-
 		/* Setup UART clock modes for all UARTs, disable autoclock */
 		clkmodes |= uartinit_data[i].ck_mode_mask;
 
@@ -189,7 +109,7 @@ void __init lpc32xx_serial_init(void)
 	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
 	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		/* Force a flush of the RX FIFOs to work around a HW bug */
-		puart = serial_std_platform_data[i].mapbase;
+		puart = uartinit_data[i].mapbase;
 		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
 		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
 		j = LPC32XX_SUART_FIFO_SIZE;
@@ -198,11 +118,13 @@ void __init lpc32xx_serial_init(void)
 		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 	}
 
+	/* Disable IrDA pulsing support on UART6 */
+	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+	tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
+	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
 	/* Disable UART5->USB transparent mode or USB won't work */
 	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
 	tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
 	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
-	platform_add_devices(lpc32xx_serial_devs,
-		ARRAY_SIZE(lpc32xx_serial_devs));
 }