summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-lpc32xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-lpc32xx')
-rw-r--r--arch/arm/mach-lpc32xx/Kconfig25
-rw-r--r--arch/arm/mach-lpc32xx/clock.c149
-rw-r--r--arch/arm/mach-lpc32xx/common.c47
-rw-r--r--arch/arm/mach-lpc32xx/common.h6
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/board.h24
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/platform.h51
-rw-r--r--arch/arm/mach-lpc32xx/irq.c4
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c5
-rw-r--r--arch/arm/mach-lpc32xx/pm.c2
-rw-r--r--arch/arm/mach-lpc32xx/timer.c48
10 files changed, 244 insertions, 117 deletions
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index fde66350869..75946ac89ee 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -29,5 +29,30 @@ config ARCH_LPC32XX_UART6_SELECT
endmenu
+menu "LPC32XX chip components"
+
+config ARCH_LPC32XX_IRAM_FOR_NET
+ bool "Use IRAM for network buffers"
+ default y
+ help
+ Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
+ network buffer. If the total combined required buffer sizes is
+ larger than the size of IRAM, then SDRAM will be used instead.
+
+ This can be enabled safely if the IRAM is not intended for other
+ uses.
+
+config ARCH_LPC32XX_MII_SUPPORT
+ bool "Check to enable MII support or leave disabled for RMII support"
+ help
+ Say Y here to enable MII support, or N for RMII support. Regardless of
+ which support is selected, the ethernet interface driver needs to be
+ selected in the device driver networking section.
+
+ The PHY3250 reference board uses RMII, so users of this board should
+ say N.
+
+endmenu
+
endif
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 473015ac07b..47639f31ba3 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -82,10 +82,12 @@
* will also impact the individual peripheral rates.
*/
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/device.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/amba/bus.h>
@@ -97,9 +99,12 @@
#include "clock.h"
#include "common.h"
+static DEFINE_SPINLOCK(global_clkregs_lock);
+
+static int usb_pll_enable, usb_pll_valid;
+
static struct clk clk_armpll;
static struct clk clk_usbpll;
-static DEFINE_MUTEX(clkm_lock);
/*
* Post divider values for PLLs based on selected register value
@@ -127,7 +132,7 @@ static struct clk osc_32KHz = {
static int local_pll397_enable(struct clk *clk, int enable)
{
u32 reg;
- unsigned long timeout = 1 + msecs_to_jiffies(10);
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
@@ -142,7 +147,7 @@ static int local_pll397_enable(struct clk *clk, int enable)
/* Wait for PLL397 lock */
while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
- (timeout > jiffies))
+ time_before(jiffies, timeout))
cpu_relax();
if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
@@ -156,7 +161,7 @@ static int local_pll397_enable(struct clk *clk, int enable)
static int local_oscmain_enable(struct clk *clk, int enable)
{
u32 reg;
- unsigned long timeout = 1 + msecs_to_jiffies(10);
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
@@ -171,7 +176,7 @@ static int local_oscmain_enable(struct clk *clk, int enable)
/* Wait for main oscillator to start */
while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
- (timeout > jiffies))
+ time_before(jiffies, timeout))
cpu_relax();
if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
@@ -382,30 +387,62 @@ static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
static int local_usbpll_enable(struct clk *clk, int enable)
{
u32 reg;
- int ret = -ENODEV;
- unsigned long timeout = 1 + msecs_to_jiffies(10);
+ int ret = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(20);
reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- if (enable == 0) {
- reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
- LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
- } else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+ __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
+ LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+ LPC32XX_CLKPWR_USB_CTRL);
+ __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
+ LPC32XX_CLKPWR_USB_CTRL);
+
+ if (enable && usb_pll_valid && usb_pll_enable) {
+ ret = -ENODEV;
+ /*
+ * If the PLL rate has been previously set, then the rate
+ * in the PLL register is valid and can be enabled here.
+ * Otherwise, it needs to be enabled as part of setrate.
+ */
+
+ /*
+ * Gate clock into PLL
+ */
reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
- /* Wait for PLL lock */
- while ((timeout > jiffies) & (ret == -ENODEV)) {
+ /*
+ * Enable PLL
+ */
+ reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+ /*
+ * Wait for PLL to lock
+ */
+ while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
ret = 0;
+ else
+ udelay(10);
}
+ /*
+ * Gate clock from PLL if PLL is locked
+ */
if (ret == 0) {
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+ __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
+ LPC32XX_CLKPWR_USB_CTRL);
+ } else {
+ __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+ LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+ LPC32XX_CLKPWR_USB_CTRL);
}
+ } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) {
+ usb_pll_valid = 0;
+ usb_pll_enable = 0;
}
return ret;
@@ -423,7 +460,7 @@ static unsigned long local_usbpll_round_rate(struct clk *clk,
*/
rate = rate * 1000;
- clkin = clk->parent->rate;
+ clkin = clk->get_rate(clk);
usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
clkin = clkin / usbdiv;
@@ -437,7 +474,8 @@ static unsigned long local_usbpll_round_rate(struct clk *clk,
static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
{
- u32 clkin, reg, usbdiv;
+ int ret = -ENODEV;
+ u32 clkin, usbdiv;
struct clk_pll_setup pllsetup;
/*
@@ -446,7 +484,7 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
*/
rate = rate * 1000;
- clkin = clk->get_rate(clk);
+ clkin = clk->get_rate(clk->parent);
usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
clkin = clkin / usbdiv;
@@ -455,22 +493,25 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
return -EINVAL;
+ /*
+ * Disable PLL clocks during PLL change
+ */
local_usbpll_enable(clk, 0);
-
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- pllsetup.analog_on = 1;
+ pllsetup.analog_on = 0;
local_clk_usbpll_setup(&pllsetup);
- clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+ /*
+ * Start USB PLL and check PLL status
+ */
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+ usb_pll_valid = 1;
+ usb_pll_enable = 1;
- return 0;
+ ret = local_usbpll_enable(clk, 1);
+ if (ret >= 0)
+ clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+ return ret;
}
static struct clk clk_usbpll = {
@@ -926,20 +967,8 @@ static struct clk clk_lcd = {
.enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
};
-static inline void clk_lock(void)
-{
- mutex_lock(&clkm_lock);
-}
-
-static inline void clk_unlock(void)
-{
- mutex_unlock(&clkm_lock);
-}
-
static void local_clk_disable(struct clk *clk)
{
- WARN_ON(clk->usecount == 0);
-
/* Don't attempt to disable clock if it has no users */
if (clk->usecount > 0) {
clk->usecount--;
@@ -982,10 +1011,11 @@ static int local_clk_enable(struct clk *clk)
int clk_enable(struct clk *clk)
{
int ret;
+ unsigned long flags;
- clk_lock();
+ spin_lock_irqsave(&global_clkregs_lock, flags);
ret = local_clk_enable(clk);
- clk_unlock();
+ spin_unlock_irqrestore(&global_clkregs_lock, flags);
return ret;
}
@@ -996,9 +1026,11 @@ EXPORT_SYMBOL(clk_enable);
*/
void clk_disable(struct clk *clk)
{
- clk_lock();
+ unsigned long flags;
+
+ spin_lock_irqsave(&global_clkregs_lock, flags);
local_clk_disable(clk);
- clk_unlock();
+ spin_unlock_irqrestore(&global_clkregs_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@@ -1007,13 +1039,7 @@ EXPORT_SYMBOL(clk_disable);
*/
unsigned long clk_get_rate(struct clk *clk)
{
- unsigned long rate;
-
- clk_lock();
- rate = clk->get_rate(clk);
- clk_unlock();
-
- return rate;
+ return clk->get_rate(clk);
}
EXPORT_SYMBOL(clk_get_rate);
@@ -1029,11 +1055,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
* the actual rate set as part of the peripheral dividers
* instead of high level clock control
*/
- if (clk->set_rate) {
- clk_lock();
+ if (clk->set_rate)
ret = clk->set_rate(clk, rate);
- clk_unlock();
- }
return ret;
}
@@ -1044,15 +1067,11 @@ EXPORT_SYMBOL(clk_set_rate);
*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
- clk_lock();
-
if (clk->round_rate)
rate = clk->round_rate(clk, rate);
else
rate = clk->get_rate(clk);
- clk_unlock();
-
return rate;
}
EXPORT_SYMBOL(clk_round_rate);
@@ -1110,12 +1129,12 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+ _REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
+ _REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
_REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
- _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
- _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
- _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
- _REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
+ _REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
+ _REGISTER_CLOCK("lpc-eth.0", NULL, clk_net)
_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 6c76bb36559..bbbf063a74c 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -160,6 +160,53 @@ struct platform_device lpc32xx_adc_device = {
};
/*
+ * USB support
+ */
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32) 0;
+static struct resource ohci_resources[] = {
+ {
+ .start = IO_ADDRESS(LPC32XX_USB_BASE),
+ .end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LPC32XX_USB_HOST,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+struct platform_device lpc32xx_ohci_device = {
+ .name = "usb-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+ .num_resources = ARRAY_SIZE(ohci_resources),
+ .resource = ohci_resources,
+};
+
+/*
+ * Network Support
+ */
+static struct resource net_resources[] = {
+ [0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
+ [1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
+ [2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
+};
+
+static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
+struct platform_device lpc32xx_net_device = {
+ .name = "lpc-eth",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lpc32xx_mac_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(net_resources),
+ .resource = net_resources,
+};
+
+/*
* Returns the unique ID for the device
*/
void lpc32xx_get_uid(u32 devid[4])
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 04b72739eb9..23c21905ff8 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -19,6 +19,7 @@
#ifndef __LPC32XX_COMMON_H
#define __LPC32XX_COMMON_H
+#include <mach/board.h>
#include <linux/platform_device.h>
/*
@@ -31,6 +32,8 @@ extern struct platform_device lpc32xx_i2c2_device;
extern struct platform_device lpc32xx_tsc_device;
extern struct platform_device lpc32xx_adc_device;
extern struct platform_device lpc32xx_rtc_device;
+extern struct platform_device lpc32xx_ohci_device;
+extern struct platform_device lpc32xx_net_device;
/*
* Other arch specific structures and functions
@@ -66,9 +69,6 @@ extern u32 clk_get_pclk_div(void);
*/
extern void lpc32xx_get_uid(u32 devid[4]);
-extern void lpc32xx_watchdog_reset(void);
-extern u32 lpc32xx_return_iram_size(void);
-
/*
* Pointers used for sizing and copying suspend function data
*/
diff --git a/arch/arm/mach-lpc32xx/include/mach/board.h b/arch/arm/mach-lpc32xx/include/mach/board.h
new file mode 100644
index 00000000000..52531ca7bd1
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/board.h
@@ -0,0 +1,24 @@
+/*
+ * arm/arch/mach-lpc32xx/include/mach/board.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+extern u32 lpc32xx_return_iram_size(void);
+
+#endif /* __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h
index 14ea8d1aadb..c584f5bb164 100644
--- a/arch/arm/mach-lpc32xx/include/mach/platform.h
+++ b/arch/arm/mach-lpc32xx/include/mach/platform.h
@@ -591,42 +591,42 @@
/*
* Timer/counter register offsets
*/
-#define LCP32XX_TIMER_IR(x) io_p2v((x) + 0x00)
-#define LCP32XX_TIMER_TCR(x) io_p2v((x) + 0x04)
-#define LCP32XX_TIMER_TC(x) io_p2v((x) + 0x08)
-#define LCP32XX_TIMER_PR(x) io_p2v((x) + 0x0C)
-#define LCP32XX_TIMER_PC(x) io_p2v((x) + 0x10)
-#define LCP32XX_TIMER_MCR(x) io_p2v((x) + 0x14)
-#define LCP32XX_TIMER_MR0(x) io_p2v((x) + 0x18)
-#define LCP32XX_TIMER_MR1(x) io_p2v((x) + 0x1C)
-#define LCP32XX_TIMER_MR2(x) io_p2v((x) + 0x20)
-#define LCP32XX_TIMER_MR3(x) io_p2v((x) + 0x24)
-#define LCP32XX_TIMER_CCR(x) io_p2v((x) + 0x28)
-#define LCP32XX_TIMER_CR0(x) io_p2v((x) + 0x2C)
-#define LCP32XX_TIMER_CR1(x) io_p2v((x) + 0x30)
-#define LCP32XX_TIMER_CR2(x) io_p2v((x) + 0x34)
-#define LCP32XX_TIMER_CR3(x) io_p2v((x) + 0x38)
-#define LCP32XX_TIMER_EMR(x) io_p2v((x) + 0x3C)
-#define LCP32XX_TIMER_CTCR(x) io_p2v((x) + 0x70)
+#define LPC32XX_TIMER_IR(x) io_p2v((x) + 0x00)
+#define LPC32XX_TIMER_TCR(x) io_p2v((x) + 0x04)
+#define LPC32XX_TIMER_TC(x) io_p2v((x) + 0x08)
+#define LPC32XX_TIMER_PR(x) io_p2v((x) + 0x0C)
+#define LPC32XX_TIMER_PC(x) io_p2v((x) + 0x10)
+#define LPC32XX_TIMER_MCR(x) io_p2v((x) + 0x14)
+#define LPC32XX_TIMER_MR0(x) io_p2v((x) + 0x18)
+#define LPC32XX_TIMER_MR1(x) io_p2v((x) + 0x1C)
+#define LPC32XX_TIMER_MR2(x) io_p2v((x) + 0x20)
+#define LPC32XX_TIMER_MR3(x) io_p2v((x) + 0x24)
+#define LPC32XX_TIMER_CCR(x) io_p2v((x) + 0x28)
+#define LPC32XX_TIMER_CR0(x) io_p2v((x) + 0x2C)
+#define LPC32XX_TIMER_CR1(x) io_p2v((x) + 0x30)
+#define LPC32XX_TIMER_CR2(x) io_p2v((x) + 0x34)
+#define LPC32XX_TIMER_CR3(x) io_p2v((x) + 0x38)
+#define LPC32XX_TIMER_EMR(x) io_p2v((x) + 0x3C)
+#define LPC32XX_TIMER_CTCR(x) io_p2v((x) + 0x70)
/*
* ir register definitions
*/
-#define LCP32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
-#define LCP32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
+#define LPC32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
+#define LPC32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
/*
* tcr register definitions
*/
-#define LCP32XX_TIMER_CNTR_TCR_EN 0x1
-#define LCP32XX_TIMER_CNTR_TCR_RESET 0x2
+#define LPC32XX_TIMER_CNTR_TCR_EN 0x1
+#define LPC32XX_TIMER_CNTR_TCR_RESET 0x2
/*
* mcr register definitions
*/
-#define LCP32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
-#define LCP32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
-#define LCP32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
+#define LPC32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
+#define LPC32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
+#define LPC32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
/*
* Standard UART register offsets
@@ -690,5 +690,8 @@
#define LPC32XX_GPIO_P1_MUX_SET _GPREG(0x130)
#define LPC32XX_GPIO_P1_MUX_CLR _GPREG(0x134)
#define LPC32XX_GPIO_P1_MUX_STATE _GPREG(0x138)
+#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
#endif
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index c74de01ab5b..d080cb1123d 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -150,6 +150,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
},
+ [IRQ_LPC32XX_ETHERNET] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT,
+ },
[IRQ_LPC32XX_USB_OTG_ATX] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index a539f4f72f2..7f7401ec748 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <mach/board.h>
#include <mach/gpio-lpc32xx.h>
#include "common.h"
@@ -247,12 +248,16 @@ static struct platform_device lpc32xx_gpio_led_device = {
};
static struct platform_device *phy3250_devs[] __initdata = {
+ &lpc32xx_rtc_device,
+ &lpc32xx_tsc_device,
&lpc32xx_i2c0_device,
&lpc32xx_i2c1_device,
&lpc32xx_i2c2_device,
&lpc32xx_watchdog_device,
&lpc32xx_gpio_led_device,
&lpc32xx_adc_device,
+ &lpc32xx_ohci_device,
+ &lpc32xx_net_device,
};
static struct amba_device *amba_devs[] __initdata = {
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index b9c80597b7b..207e81275ff 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -13,7 +13,7 @@
/*
* LPC32XX CPU and system power management
*
- * The LCP32XX has three CPU modes for controlling system power: run,
+ * The LPC32XX has three CPU modes for controlling system power: run,
* direct-run, and halt modes. When switching between halt and run modes,
* the CPU transistions through direct-run mode. For Linux, direct-run
* mode is not used in normal operation. Halt mode is used when the
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index b42c909bbee..c40667c3316 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -34,11 +34,11 @@
static int lpc32xx_clkevt_next_event(unsigned long delta,
struct clock_event_device *dev)
{
- __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
- LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- __raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
- __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
- LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
+ LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
+ LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
return 0;
}
@@ -58,7 +58,7 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
* disable the timer to wait for the first call to
* set_next_event().
*/
- __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
break;
case CLOCK_EVT_MODE_UNUSED:
@@ -81,8 +81,8 @@ static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
struct clock_event_device *evt = &lpc32xx_clkevt;
/* Clear match */
- __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
- LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
+ LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
evt->event_handler(evt);
@@ -128,14 +128,14 @@ static void __init lpc32xx_timer_init(void)
clkrate = clkrate / clk_get_pclk_div();
/* Initial timer setup */
- __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
- LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
- __raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
- __raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
- LCP32XX_TIMER_CNTR_MCR_STOP(0) |
- LCP32XX_TIMER_CNTR_MCR_RESET(0),
- LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
+ LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+ __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
+ LPC32XX_TIMER_CNTR_MCR_STOP(0) |
+ LPC32XX_TIMER_CNTR_MCR_RESET(0),
+ LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
/* Setup tick interrupt */
setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
@@ -151,14 +151,14 @@ static void __init lpc32xx_timer_init(void)
clockevents_register_device(&lpc32xx_clkevt);
/* Use timer1 as clock source. */
- __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
- LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
- __raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
- __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
- __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
- LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-
- clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
+ __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
+ LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+ __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
+ __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
+ LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+
+ clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 23:12:20 +0000