diff options
Diffstat (limited to 'arch/arm/mach-msm/board-qsd8x50.c')
| -rw-r--r-- | arch/arm/mach-msm/board-qsd8x50.c | 50 |
1 files changed, 37 insertions, 13 deletions
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index e3cc80792d6..ed2af4ad97e 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -35,20 +35,49 @@ extern struct sys_timer msm_timer; -static struct msm_gpio uart3_config_data[] = { - { GPIO_CFG(86, 1, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"}, - { GPIO_CFG(87, 1, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"}, +static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300; +static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156; + +/* Leave smc91x resources empty here, as we'll fill them in + * at run-time: they vary from board to board, and the true + * configuration won't be known until boot. + */ +static struct resource smc91x_resources[] __initdata = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, }; -static struct platform_device *devices[] __initdata = { - &msm_device_uart3, +static struct platform_device smc91x_device __initdata = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, }; -static void msm8x50_init_uart3(void) +static int __init msm_init_smc91x(void) { - msm_gpios_request_enable(uart3_config_data, - ARRAY_SIZE(uart3_config_data)); + if (machine_is_qsd8x50_surf()) { + smc91x_resources[0].start = qsd8x50_surf_smc91x_base; + smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff; + smc91x_resources[1].start = + gpio_to_irq(qsd8x50_surf_smc91x_gpio); + smc91x_resources[1].end = + gpio_to_irq(qsd8x50_surf_smc91x_gpio); + platform_device_register(&smc91x_device); + } + + return 0; } +module_init(msm_init_smc91x); + +static struct platform_device *devices[] __initdata = { + &msm_device_uart3, + &msm_device_smd, +}; static void __init qsd8x50_map_io(void) { @@ -64,14 +93,11 @@ static void __init qsd8x50_init_irq(void) static void __init qsd8x50_init(void) { - msm8x50_init_uart3(); platform_add_devices(devices, ARRAY_SIZE(devices)); } MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, @@ -82,8 +108,6 @@ MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") #ifdef CONFIG_MSM_DEBUG_UART - .phys_io = MSM_DEBUG_UART_PHYS, - .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, |