1 files changed, 93 insertions, 0 deletions
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
new file mode 100644
index 00000000000..e3cc80792d6
--- /dev/null
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -0,0 +1,93 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/irqs.h>
+#include <mach/sirc.h>
+#include <mach/gpio.h>
+
+#include "devices.h"
+
+extern struct sys_timer msm_timer;
+
+static struct msm_gpio uart3_config_data[] = {
+	{ GPIO_CFG(86, 1, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
+	{ GPIO_CFG(87, 1, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+};
+
+static void msm8x50_init_uart3(void)
+{
+	msm_gpios_request_enable(uart3_config_data,
+				ARRAY_SIZE(uart3_config_data));
+}
+
+static void __init qsd8x50_map_io(void)
+{
+	msm_map_qsd8x50_io();
+	msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50);
+}
+
+static void __init qsd8x50_init_irq(void)
+{
+	msm_init_irq();
+	msm_init_sirc();
+}
+
+static void __init qsd8x50_init(void)
+{
+	msm8x50_init_uart3();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = qsd8x50_map_io,
+	.init_irq = qsd8x50_init_irq,
+	.init_machine = qsd8x50_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = qsd8x50_map_io,
+	.init_irq = qsd8x50_init_irq,
+	.init_machine = qsd8x50_init,
+	.timer = &msm_timer,
+MACHINE_END