diff options
Diffstat (limited to 'arch/arm/mach-mv78xx0')
| -rw-r--r-- | arch/arm/mach-mv78xx0/Kconfig | 6 | ||||
| -rw-r--r-- | arch/arm/mach-mv78xx0/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mv78xx0/common.c | 132 | ||||
| -rw-r--r-- | arch/arm/mach-mv78xx0/common.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-mv78xx0/db78x00-bp-setup.c | 16 | ||||
| -rw-r--r-- | arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 14 | ||||
| -rw-r--r-- | arch/arm/mach-mv78xx0/pcie.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-mv78xx0/rd78x00-masa-setup.c | 88 |
8 files changed, 259 insertions, 7 deletions
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index d83cb86837d..6fbe68fe441 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -8,6 +8,12 @@ config MACH_DB78X00_BP Say 'Y' here if you want your kernel to support the Marvell DB-78x00-BP Development Board. +config MACH_RD78X00_MASA + bool "Marvell RD-78x00-mASA Reference Design" + help + Say 'Y' here if you want your kernel to support the + Marvell RD-78x00-mASA Reference Design. + endmenu endif diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile index ec16c05c3b1..da628b7f3bb 100644 --- a/arch/arm/mach-mv78xx0/Makefile +++ b/arch/arm/mach-mv78xx0/Makefile @@ -1,2 +1,3 @@ obj-y += common.o addr-map.o irq.o pcie.o obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o +obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b0e4e0d8f50..a575daaa62d 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -14,7 +14,9 @@ #include <linux/serial_8250.h> #include <linux/mbus.h> #include <linux/mv643xx_eth.h> +#include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> +#include <linux/ethtool.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/mv78xx0.h> @@ -430,9 +432,22 @@ static struct platform_device mv78xx0_ge10 = { void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) { + u32 dev, rev; + eth_data->shared = &mv78xx0_ge10_shared; mv78xx0_ge10.dev.platform_data = eth_data; + /* + * On the Z0, ge10 and ge11 are internally connected back + * to back, and not brought out. + */ + mv78xx0_pcie_id(&dev, &rev); + if (dev == MV78X00_Z0_DEV_ID) { + eth_data->phy_addr = MV643XX_ETH_PHY_NONE; + eth_data->speed = SPEED_1000; + eth_data->duplex = DUPLEX_FULL; + } + platform_device_register(&mv78xx0_ge10_shared); platform_device_register(&mv78xx0_ge10); } @@ -484,13 +499,101 @@ static struct platform_device mv78xx0_ge11 = { void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) { + u32 dev, rev; + eth_data->shared = &mv78xx0_ge11_shared; mv78xx0_ge11.dev.platform_data = eth_data; + /* + * On the Z0, ge10 and ge11 are internally connected back + * to back, and not brought out. + */ + mv78xx0_pcie_id(&dev, &rev); + if (dev == MV78X00_Z0_DEV_ID) { + eth_data->phy_addr = MV643XX_ETH_PHY_NONE; + eth_data->speed = SPEED_1000; + eth_data->duplex = DUPLEX_FULL; + } + platform_device_register(&mv78xx0_ge11_shared); platform_device_register(&mv78xx0_ge11); } +/***************************************************************************** + * I2C bus 0 + ****************************************************************************/ + +static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = { + .freq_m = 8, /* assumes 166 MHz TCLK */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource mv78xx0_i2c_0_resources[] = { + { + .name = "i2c 0 base", + .start = I2C_0_PHYS_BASE, + .end = I2C_0_PHYS_BASE + 0x1f, + .flags = IORESOURCE_MEM, + }, { + .name = "i2c 0 irq", + .start = IRQ_MV78XX0_I2C_0, + .end = IRQ_MV78XX0_I2C_0, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct platform_device mv78xx0_i2c_0 = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv78xx0_i2c_0_resources), + .resource = mv78xx0_i2c_0_resources, + .dev = { + .platform_data = &mv78xx0_i2c_0_pdata, + }, +}; + +/***************************************************************************** + * I2C bus 1 + ****************************************************************************/ + +static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = { + .freq_m = 8, /* assumes 166 MHz TCLK */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource mv78xx0_i2c_1_resources[] = { + { + .name = "i2c 1 base", + .start = I2C_1_PHYS_BASE, + .end = I2C_1_PHYS_BASE + 0x1f, + .flags = IORESOURCE_MEM, + }, { + .name = "i2c 1 irq", + .start = IRQ_MV78XX0_I2C_1, + .end = IRQ_MV78XX0_I2C_1, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct platform_device mv78xx0_i2c_1 = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv78xx0_i2c_1_resources), + .resource = mv78xx0_i2c_1_resources, + .dev = { + .platform_data = &mv78xx0_i2c_1_pdata, + }, +}; + +void __init mv78xx0_i2c_init(void) +{ + platform_device_register(&mv78xx0_i2c_0); + platform_device_register(&mv78xx0_i2c_1); +} /***************************************************************************** * SATA @@ -719,6 +822,32 @@ struct sys_timer mv78xx0_timer = { /***************************************************************************** * General ****************************************************************************/ +static char * __init mv78xx0_id(void) +{ + u32 dev, rev; + + mv78xx0_pcie_id(&dev, &rev); + + if (dev == MV78X00_Z0_DEV_ID) { + if (rev == MV78X00_REV_Z0) + return "MV78X00-Z0"; + else + return "MV78X00-Rev-Unsupported"; + } else if (dev == MV78100_DEV_ID) { + if (rev == MV78100_REV_A0) + return "MV78100-A0"; + else + return "MV78100-Rev-Unsupported"; + } else if (dev == MV78200_DEV_ID) { + if (rev == MV78100_REV_A0) + return "MV78200-A0"; + else + return "MV78200-Rev-Unsupported"; + } else { + return "Device-Unknown"; + } +} + static int __init is_l2_writethrough(void) { return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH); @@ -737,7 +866,8 @@ void __init mv78xx0_init(void) get_pclk_l2clk(hclk, core_index, &pclk, &l2clk); tclk = get_tclk(); - printk(KERN_INFO "MV78xx0 core #%d, ", core_index); + printk(KERN_INFO "%s ", mv78xx0_id()); + printk("core #%d, ", core_index); printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000); printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000); printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h index 78af5de319d..befc2247546 100644 --- a/arch/arm/mach-mv78xx0/common.h +++ b/arch/arm/mach-mv78xx0/common.h @@ -29,6 +29,8 @@ void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, int maj, int min); +void mv78xx0_pcie_id(u32 *dev, u32 *rev); + void mv78xx0_ehci0_init(void); void mv78xx0_ehci1_init(void); void mv78xx0_ehci2_init(void); @@ -42,6 +44,7 @@ void mv78xx0_uart0_init(void); void mv78xx0_uart1_init(void); void mv78xx0_uart2_init(void); void mv78xx0_uart3_init(void); +void mv78xx0_i2c_init(void); extern struct sys_timer mv78xx0_timer; diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index 2e285bbb7bb..efdabe04c69 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -14,6 +14,7 @@ #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <linux/i2c.h> #include <mach/mv78xx0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -28,21 +29,22 @@ static struct mv643xx_eth_platform_data db78x00_ge01_data = { }; static struct mv643xx_eth_platform_data db78x00_ge10_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, + .phy_addr = MV643XX_ETH_PHY_ADDR(10), }; static struct mv643xx_eth_platform_data db78x00_ge11_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, + .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; static struct mv_sata_platform_data db78x00_sata_data = { .n_ports = 2, }; +static struct i2c_board_info __initdata db78x00_i2c_rtc = { + I2C_BOARD_INFO("ds1338", 0x68), +}; + + static void __init db78x00_init(void) { /* @@ -64,6 +66,8 @@ static void __init db78x00_init(void) mv78xx0_sata_init(&db78x00_sata_data); mv78xx0_uart0_init(); mv78xx0_uart2_init(); + mv78xx0_i2c_init(); + i2c_register_board_info(0, &db78x00_i2c_rtc, 1); } else { mv78xx0_uart1_init(); mv78xx0_uart3_init(); diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index e930ea5330a..582cffc733a 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -80,6 +80,18 @@ #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) /* + * Supported devices and revisions. + */ +#define MV78X00_Z0_DEV_ID 0x6381 +#define MV78X00_REV_Z0 1 + +#define MV78100_DEV_ID 0x7810 +#define MV78100_REV_A0 1 + +#define MV78200_DEV_ID 0x7820 +#define MV78200_REV_A0 1 + +/* * Register Map */ #define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) @@ -90,6 +102,8 @@ #define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) #define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) #define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) +#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) +#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100) #define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) #define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) #define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index aad3a7a2f83..a560439dcc3 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -33,6 +33,12 @@ static struct resource pcie_io_space; static struct resource pcie_mem_space; +void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE); + *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE); +} + static void __init mv78xx0_pcie_preinit(void) { int i; diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c new file mode 100644 index 00000000000..e136b7a0335 --- /dev/null +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -0,0 +1,88 @@ +/* + * arch/arm/mach-mv78x00/rd78x00-masa-setup.c + * + * Marvell RD-78x00-mASA Development Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <mach/mv78xx0.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include "common.h" + +static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(9), +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = { +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = { +}; + +static struct mv_sata_platform_data rd78x00_masa_sata_data = { + .n_ports = 2, +}; + +static void __init rd78x00_masa_init(void) +{ + /* + * Basic MV78x00 setup. Needs to be called early. + */ + mv78xx0_init(); + + /* + * Partition on-chip peripherals between the two CPU cores. + */ + if (mv78xx0_core_index() == 0) { + mv78xx0_ehci0_init(); + mv78xx0_ehci1_init(); + mv78xx0_ge00_init(&rd78x00_masa_ge00_data); + mv78xx0_ge10_init(&rd78x00_masa_ge10_data); + mv78xx0_sata_init(&rd78x00_masa_sata_data); + mv78xx0_uart0_init(); + mv78xx0_uart2_init(); + } else { + mv78xx0_ehci2_init(); + mv78xx0_ge01_init(&rd78x00_masa_ge01_data); + mv78xx0_ge11_init(&rd78x00_masa_ge11_data); + mv78xx0_uart1_init(); + mv78xx0_uart3_init(); + } +} + +static int __init rd78x00_pci_init(void) +{ + /* + * Assign all PCIe devices to CPU core #0. + */ + if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0) + mv78xx0_pcie_init(1, 1); + + return 0; +} +subsys_initcall(rd78x00_pci_init); + +MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") + /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ + .phys_io = MV78XX0_REGS_PHYS_BASE, + .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = rd78x00_masa_init, + .map_io = mv78xx0_map_io, + .init_irq = mv78xx0_init_irq, + .timer = &mv78xx0_timer, +MACHINE_END |