diff options
Diffstat (limited to 'arch/arm/mach-mx3/mach-armadillo5x0.c')
| -rw-r--r-- | arch/arm/mach-mx3/mach-armadillo5x0.c | 183 |
1 files changed, 174 insertions, 9 deletions
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 3d72b0b8970..96aadcadb4f 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -36,6 +36,9 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/i2c.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/delay.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -45,14 +48,14 @@ #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/board-armadillo5x0.h> #include <mach/mmc.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" #include "crm_regs.h" @@ -103,8 +106,158 @@ static int armadillo5x0_pins[] = { /* I2C2 */ MX31_PIN_CSPI2_MOSI__SCL, MX31_PIN_CSPI2_MISO__SDA, + /* OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, + /* USB host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), }; +/* USB */ +#if defined(CONFIG_USB_ULPI) + +#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4) +#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6) +#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3) + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbotg_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); + + /* Chip already enabled by hardware */ + /* OTG phy reset*/ + err = gpio_request(OTG_RESET, "USB-OTG-RESET"); + if (err) { + pr_err("Failed to request the usb otg reset gpio\n"); + return err; + } + + err = gpio_direction_output(OTG_RESET, 1/*HIGH*/); + if (err) { + pr_err("Failed to reset the usb otg phy\n"); + goto otg_free_reset; + } + + gpio_set_value(OTG_RESET, 0/*LOW*/); + mdelay(5); + gpio_set_value(OTG_RESET, 1/*HIGH*/); + + return 0; + +otg_free_reset: + gpio_free(OTG_RESET); + return err; +} + +static int usbh2_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + + /* Enable the chip */ + err = gpio_request(USBH2_CS, "USB-H2-CS"); + if (err) { + pr_err("Failed to request the usb host 2 CS gpio\n"); + return err; + } + + err = gpio_direction_output(USBH2_CS, 0/*Enabled*/); + if (err) { + pr_err("Failed to drive the usb host 2 CS gpio\n"); + goto h2_free_cs; + } + + /* H2 phy reset*/ + err = gpio_request(USBH2_RESET, "USB-H2-RESET"); + if (err) { + pr_err("Failed to request the usb host 2 reset gpio\n"); + goto h2_free_cs; + } + + err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/); + if (err) { + pr_err("Failed to reset the usb host 2 phy\n"); + goto h2_free_reset; + } + + gpio_set_value(USBH2_RESET, 0/*LOW*/); + mdelay(5); + gpio_set_value(USBH2_RESET, 1/*HIGH*/); + + return 0; + +h2_free_reset: + gpio_free(USBH2_RESET); +h2_free_cs: + gpio_free(USBH2_CS); + return err; +} + +static struct mxc_usbh_platform_data usbotg_pdata = { + .init = usbotg_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, +}; +#endif /* CONFIG_USB_ULPI */ + /* RTC over I2C*/ #define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) @@ -146,7 +299,8 @@ static struct platform_device armadillo5x0_button_device = { /* * NAND Flash */ -static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = { +static const struct mxc_nand_platform_data +armadillo5x0_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -338,13 +492,12 @@ static struct platform_device armadillo5x0_smc911x_device = { }; /* UART device data */ -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, - &mxc_i2c_device1, &armadillo5x0_button_device, }; @@ -357,10 +510,11 @@ static void __init armadillo5x0_init(void) ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); platform_add_devices(devices, ARRAY_SIZE(devices)); + imx31_add_imx_i2c1(NULL); /* Register UART */ - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); /* SMSC9118 IRQ pin */ gpio_direction_input(MX31_PIN_GPIO1_0); @@ -377,7 +531,7 @@ static void __init armadillo5x0_init(void) &armadillo5x0_nor_flash_pdata); /* Register NAND Flash */ - mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata); + imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); @@ -393,6 +547,17 @@ static void __init armadillo5x0_init(void) if (armadillo5x0_i2c_rtc.irq == 0) pr_warning("armadillo5x0_init: failed to get RTC IRQ\n"); i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); + + /* USB */ +#if defined(CONFIG_USB_ULPI) + usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &usbotg_pdata); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif } static void __init armadillo5x0_timer_init(void) |