diff options
Diffstat (limited to 'arch/arm/mach-mx3/mach-armadillo5x0.c')
| -rw-r--r-- | arch/arm/mach-mx3/mach-armadillo5x0.c | 41 |
1 files changed, 21 insertions, 20 deletions
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 28b6f414b5d..226829bf7c2 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -133,7 +133,6 @@ static int armadillo5x0_pins[] = { }; /* USB */ -#if defined(CONFIG_USB_ULPI) #define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4) #define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6) @@ -176,8 +175,10 @@ static int usbotg_init(struct platform_device *pdev) gpio_set_value(OTG_RESET, 0/*LOW*/); mdelay(5); gpio_set_value(OTG_RESET, 1/*HIGH*/); + mdelay(10); - return 0; + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); otg_free_reset: gpio_free(OTG_RESET); @@ -233,8 +234,10 @@ static int usbh2_init(struct platform_device *pdev) gpio_set_value(USBH2_RESET, 0/*LOW*/); mdelay(5); gpio_set_value(USBH2_RESET, 1/*HIGH*/); + mdelay(10); - return 0; + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); h2_free_reset: gpio_free(USBH2_RESET); @@ -246,15 +249,12 @@ h2_free_cs: static struct mxc_usbh_platform_data usbotg_pdata __initdata = { .init = usbotg_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; -#endif /* CONFIG_USB_ULPI */ /* RTC over I2C*/ #define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) @@ -547,15 +547,15 @@ static void __init armadillo5x0_init(void) i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); /* USB */ -#if defined(CONFIG_USB_ULPI) - usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - imx31_add_mxc_ehci_otg(&usbotg_pdata); - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif + + usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbotg_pdata.otg) + imx31_add_mxc_ehci_otg(&usbotg_pdata); + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (usbh2_pdata.otg) + imx31_add_mxc_ehci_hs(2, &usbh2_pdata); } static void __init armadillo5x0_timer_init(void) @@ -569,9 +569,10 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .timer = &armadillo5x0_timer, - .init_machine = armadillo5x0_init, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &armadillo5x0_timer, + .init_machine = armadillo5x0_init, MACHINE_END |