diff options
Diffstat (limited to 'arch/arm/mach-mx3/mach-mx31_3ds.c')
| -rw-r--r-- | arch/arm/mach-mx3/mach-mx31_3ds.c | 256 |
1 files changed, 68 insertions, 188 deletions
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 58e57291b79..6fe69e124d3 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> @@ -22,7 +18,6 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/smsc911x.h> #include <linux/platform_device.h> #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> @@ -37,19 +32,47 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31_3ds.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/mxc_nand.h> -#include <mach/spi.h> +#include <mach/3ds_debugboard.h> + +#include "devices-imx31.h" #include "devices.h" -/*! - * @file mx31_3ds.c - * - * @brief This file contains the board-specific initialization routines. - * - * @ingroup System +/* Definitions for components on the Debug board */ + +/* Base address of CPLD controller on the Debug board */ +#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR) + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR MX3x_CS5_BASE_ADDR + +/* CPLD config and interrupt base address */ +#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000) + +/* status, interrupt */ +#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10) +#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38) +#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40) +#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48) +/* CPLD code version */ +#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58) + +/* CPLD IRQ line for external uart, external ethernet etc */ +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) + +#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0) + +#define MXC_MAX_EXP_IO_LINES 16 + +/* + * This file contains the board-specific initialization routines. */ static int mx31_3ds_pins[] = { @@ -145,7 +168,7 @@ static int spi1_internal_chipselect[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master spi1_pdata = { +static const struct spi_imx_master spi1_pdata __initconst = { .chipselect = spi1_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), }; @@ -165,7 +188,8 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { /* * NAND Flash */ -static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { +static const struct mxc_nand_platform_data +mx31_3ds_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, #ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT @@ -182,8 +206,10 @@ static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { #define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR) -static void mx31_3ds_usbotg_init(void) +static int mx31_3ds_usbotg_init(void) { + int err; + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); @@ -197,10 +223,25 @@ static void mx31_3ds_usbotg_init(void) mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - gpio_request(USBOTG_RST_B, "otgusb-reset"); - gpio_direction_output(USBOTG_RST_B, 0); + err = gpio_request(USBOTG_RST_B, "otgusb-reset"); + if (err) { + pr_err("Failed to request the USB OTG reset gpio\n"); + return err; + } + + err = gpio_direction_output(USBOTG_RST_B, 0); + if (err) { + pr_err("Failed to drive the USB OTG reset gpio\n"); + goto usbotg_free_reset; + } + mdelay(1); gpio_set_value(USBOTG_RST_B, 1); + return 0; + +usbotg_free_reset: + gpio_free(USBOTG_RST_B); + return err; } static struct fsl_usb2_platform_data usbotg_pdata = { @@ -208,178 +249,16 @@ static struct fsl_usb2_platform_data usbotg_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; /* - * Support for the SMSC9217 on the Debug board. - */ - -static struct smsc911x_platform_config smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource smsc911x_resources[] = { - { - .start = LAN9217_BASE_ADDR, - .end = LAN9217_BASE_ADDR + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = EXPIO_INT_ENET, - .end = EXPIO_INT_ENET, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_config, - }, -}; - -/* - * Routines for the CPLD on the debug board. It contains a CPLD handling - * LEDs, switches, interrupts for Ethernet. - */ - -static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc) -{ - uint32_t imr_val; - uint32_t int_valid; - uint32_t expio_irq; - - imr_val = __raw_readw(CPLD_INT_MASK_REG); - int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val; - - expio_irq = MXC_EXP_IO_BASE; - for (; int_valid != 0; int_valid >>= 1, expio_irq++) { - if ((int_valid & 1) == 0) - continue; - generic_handle_irq(expio_irq); - } -} - -/* - * Disable an expio pin's interrupt by setting the bit in the imr. - * @param irq an expio virtual irq number - */ -static void expio_mask_irq(uint32_t irq) -{ - uint16_t reg; - uint32_t expio = MXC_IRQ_TO_EXPIO(irq); - - /* mask the interrupt */ - reg = __raw_readw(CPLD_INT_MASK_REG); - reg |= 1 << expio; - __raw_writew(reg, CPLD_INT_MASK_REG); -} - -/* - * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. - * @param irq an expanded io virtual irq number - */ -static void expio_ack_irq(uint32_t irq) -{ - uint32_t expio = MXC_IRQ_TO_EXPIO(irq); - - /* clear the interrupt status */ - __raw_writew(1 << expio, CPLD_INT_RESET_REG); - __raw_writew(0, CPLD_INT_RESET_REG); - /* mask the interrupt */ - expio_mask_irq(irq); -} - -/* - * Enable a expio pin's interrupt by clearing the bit in the imr. - * @param irq a expio virtual irq number - */ -static void expio_unmask_irq(uint32_t irq) -{ - uint16_t reg; - uint32_t expio = MXC_IRQ_TO_EXPIO(irq); - - /* unmask the interrupt */ - reg = __raw_readw(CPLD_INT_MASK_REG); - reg &= ~(1 << expio); - __raw_writew(reg, CPLD_INT_MASK_REG); -} - -static struct irq_chip expio_irq_chip = { - .ack = expio_ack_irq, - .mask = expio_mask_irq, - .unmask = expio_unmask_irq, -}; - -static int __init mx31_3ds_init_expio(void) -{ - int i; - int ret; - - /* Check if there's a debug board connected */ - if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) || - (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) || - (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) { - /* No Debug board found */ - return -ENODEV; - } - - pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n", - __raw_readw(CPLD_CODE_VER_REG)); - - /* - * Configure INT line as GPIO input - */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq"); - if (ret) - pr_warning("could not get LAN irq gpio\n"); - else - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); - - /* Disable the interrupts and clear the status */ - __raw_writew(0, CPLD_INT_MASK_REG); - __raw_writew(0xFFFF, CPLD_INT_RESET_REG); - __raw_writew(0, CPLD_INT_RESET_REG); - __raw_writew(0x1F, CPLD_INT_MASK_REG); - for (i = MXC_EXP_IO_BASE; - i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); - i++) { - set_irq_chip(i, &expio_irq_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler); - - return 0; -} - -/* - * This structure defines the MX31 memory map. - */ -static struct map_desc mx31_3ds_io_desc[] __initdata = { - { - .virtual = MX31_CS5_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), - .length = MX31_CS5_SIZE, - .type = MT_DEVICE, - }, -}; - -/* * Set up static virtual mappings. */ static void __init mx31_3ds_map_io(void) { mx31_map_io(); - iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc)); } /*! @@ -390,10 +269,10 @@ static void __init mxc_board_init(void) mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_mxc_nand(&mx31_3ds_nand_board_info); - mxc_register_device(&mxc_spi_device1, &spi1_pdata); + imx31_add_spi_imx0(&spi1_pdata); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); @@ -402,8 +281,9 @@ static void __init mxc_board_init(void) mx31_3ds_usbotg_init(); mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata); - if (!mx31_3ds_init_expio()) - platform_device_register(&smsc911x_device); + if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT)) + printk(KERN_WARNING "Init of the debugboard failed, all " + "devices on the board are unusable.\n"); } static void __init mx31_3ds_timer_init(void) |