diff options
Diffstat (limited to 'arch/arm/mach-mx3/mx31lilly.c')
| -rw-r--r-- | arch/arm/mach-mx3/mx31lilly.c | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c new file mode 100644 index 00000000000..6ab2f163cb9 --- /dev/null +++ b/arch/arm/mach-mx3/mx31lilly.c @@ -0,0 +1,155 @@ +/* + * LILLY-1131 module support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-mx3.h> +#include <mach/board-mx31lilly.h> + +#include "devices.h" + +/* + * This file contains module-specific initialization routines for LILLY-1131. + * Initialization of peripherals found on the baseboard is implemented in the + * appropriate baseboard support code. + */ + +/* SMSC ethernet support */ + +static struct resource smsc91x_resources[] = { + { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | + SMSC911X_SAVE_MAC_ADDRESS | + SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc91x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc91x_resources), + .resource = smsc91x_resources, + .dev = { + .platform_data = &smsc911x_config, + } +}; + +/* NOR flash */ +static struct physmap_flash_data nor_flash_data = { + .width = 2, +}; + +static struct resource nor_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device physmap_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_flash_data, + }, + .resource = &nor_flash_resource, + .num_resources = 1, +}; + +static struct platform_device *devices[] __initdata = { + &smsc91x_device, + &physmap_flash_device, + &mxc_i2c_device1, +}; + +static int mx31lilly_baseboard; +core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); + +static void __init mx31lilly_board_init(void) +{ + switch (mx31lilly_baseboard) { + case MX31LILLY_NOBOARD: + break; + case MX31LILLY_DB: + mx31lilly_db_init(); + break; + default: + printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n", + mx31lilly_baseboard); + } + + mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init mx31lilly_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer mx31lilly_timer = { + .init = mx31lilly_timer_init, +}; + +MACHINE_START(LILLY1131, "INCO startec LILLY-1131") + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx31lilly_board_init, + .timer = &mx31lilly_timer, +MACHINE_END + |