summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-mx3
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-mx3')
-rw-r--r--arch/arm/mach-mx3/Kconfig15
-rw-r--r--arch/arm/mach-mx3/Makefile32
-rw-r--r--arch/arm/mach-mx3/clock-imx31.c (renamed from arch/arm/mach-mx3/clock.c)14
-rw-r--r--arch/arm/mach-mx3/clock-imx35.c9
-rw-r--r--arch/arm/mach-mx3/cpu.c2
-rw-r--r--arch/arm/mach-mx3/crm_regs.h2
-rw-r--r--arch/arm/mach-mx3/devices.c19
-rw-r--r--arch/arm/mach-mx3/devices.h3
-rw-r--r--arch/arm/mach-mx3/iomux-imx31.c (renamed from arch/arm/mach-mx3/iomux.c)2
-rw-r--r--arch/arm/mach-mx3/mach-armadillo5x0.c (renamed from arch/arm/mach-mx3/armadillo5x0.c)180
-rw-r--r--arch/arm/mach-mx3/mach-kzm_arm11_01.c (renamed from arch/arm/mach-mx3/kzmarm11.c)33
-rw-r--r--arch/arm/mach-mx3/mach-mx31_3ds.c (renamed from arch/arm/mach-mx3/mx31pdk.c)133
-rw-r--r--arch/arm/mach-mx3/mach-mx31ads.c (renamed from arch/arm/mach-mx3/mx31ads.c)53
-rw-r--r--arch/arm/mach-mx3/mach-mx31lilly.c (renamed from arch/arm/mach-mx3/mx31lilly.c)10
-rw-r--r--arch/arm/mach-mx3/mach-mx31lite.c (renamed from arch/arm/mach-mx3/mx31lite.c)25
-rw-r--r--arch/arm/mach-mx3/mach-mx31moboard.c (renamed from arch/arm/mach-mx3/mx31moboard.c)57
-rw-r--r--arch/arm/mach-mx3/mach-mx35pdk.c (renamed from arch/arm/mach-mx3/mx35pdk.c)6
-rw-r--r--arch/arm/mach-mx3/mach-pcm037.c (renamed from arch/arm/mach-mx3/pcm037.c)187
-rw-r--r--arch/arm/mach-mx3/mach-pcm037_eet.c (renamed from arch/arm/mach-mx3/pcm037_eet.c)0
-rw-r--r--arch/arm/mach-mx3/mach-pcm043.c (renamed from arch/arm/mach-mx3/pcm043.c)160
-rw-r--r--arch/arm/mach-mx3/mach-qong.c (renamed from arch/arm/mach-mx3/qong.c)20
-rw-r--r--arch/arm/mach-mx3/mm.c5
-rw-r--r--arch/arm/mach-mx3/mx31lite-db.c32
-rw-r--r--arch/arm/mach-mx3/mx31moboard-devboard.c35
-rw-r--r--arch/arm/mach-mx3/mx31moboard-marxbot.c42
-rw-r--r--arch/arm/mach-mx3/mx31moboard-smartbot.c162
26 files changed, 978 insertions, 260 deletions
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index ea8ed109a7c..170f68e46dd 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select ARCH_MX31
+ select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
@@ -49,6 +50,7 @@ config MACH_PCM037_EET
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
+ select MXC_ULPI if USB_ULPI
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
@@ -60,10 +62,19 @@ config MACH_MX31_3DS
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+ bool "Make the MXC NAND driver use the in flash Bad Block Table"
+ depends on MACH_MX31_3DS
+ depends on MTD_NAND_MXC
+ help
+ Enable this if you want that the MXC NAND driver uses the in flash
+ Bad Block Table to know what blocks are bad instead of scanning the
+ entire flash looking for bad block markers.
+
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
- select MXC_ULPI
+ select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
@@ -85,6 +96,7 @@ config MACH_QONG
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select ARCH_MX35
+ select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
@@ -92,6 +104,7 @@ config MACH_PCM043
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select ARCH_MX31
+ select MXC_ULPI if USB_ULPI
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 93c7b296be6..5d650fda5d5 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,18 +5,22 @@
# Object file lists.
obj-y := mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037) += pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
- mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG) += qong.o
-obj-$(CONFIG_MACH_PCM043) += pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
+ mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock-imx31.c
index 27a318af0d2..9a9eb6de612 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -468,6 +468,7 @@ static struct clk ahb_clk = {
}
DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
@@ -490,7 +491,7 @@ DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk);
DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
@@ -514,7 +515,6 @@ DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk)
DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -572,18 +572,15 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
- _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
};
int __init mx31_clocks_init(unsigned long fref)
{
u32 reg;
- int i;
ckih_rate = fref;
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
/* change the csi_clk parent if necessary */
reg = __raw_readl(MXC_CCM_CCMR);
@@ -618,14 +615,15 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_read_cpu_rev();
- if (mx31_revision() >= CHIP_REV_2_0) {
+ if (mx31_revision() >= MX31_CHIP_REV_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
__raw_writel(reg, MXC_CCM_PMCR1);
}
- mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+ mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+ MX31_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 7584b4c6c55..9f3e943e223 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -28,7 +28,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
#define CCM_CCMR 0x00
#define CCM_PDR0 0x04
@@ -485,15 +485,13 @@ static struct clk_lookup lookups[] = {
int __init mx35_clocks_init()
{
- int i;
unsigned int ll = 0;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
ll = (3 << 16);
#endif
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
/* Turn off all clocks except the ones we need to survive, namely:
* EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
@@ -504,7 +502,8 @@ int __init mx35_clocks_init()
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
- mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+ mxc_timer_init(&gpt_clk,
+ MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index db828809c67..861afe0fe3a 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
u32 i, srev;
/* read SREV register from IIM module */
- srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+ srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index adfa3627ad8..37a8a07beda 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -24,7 +24,7 @@
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
-#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
/* Register addresses */
#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 6adb586515e..f8911154a9f 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -575,11 +575,26 @@ struct platform_device imx_ssi_device1 = {
.resource = imx_ssi_resources1,
};
-static int mx3_devices_init(void)
+static struct resource imx_wdt_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device imx_wdt_device0 = {
+ .name = "imx-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_wdt_resources),
+ .resource = imx_wdt_resources,
+};
+
+static int __init mx3_devices_init(void)
{
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
+ imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
@@ -597,6 +612,8 @@ static int mx3_devices_init(void)
imx_ssi_resources0[1].end = MX35_INT_SSI1;
imx_ssi_resources1[1].start = MX35_INT_SSI2;
imx_ssi_resources1[1].end = MX35_INT_SSI2;
+ imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
+ imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 42cf175eac6..4f77eb50127 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -25,4 +25,5 @@ extern struct platform_device mxc_spi_device1;
extern struct platform_device mxc_spi_device2;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
-
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_wdt_device0;
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux-imx31.c
index c66ccbcdc11..a1d7fa5123d 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -29,7 +29,7 @@
/*
* IOMUX register (base) addresses
*/
-#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
#define IOMUXGPR (IOMUX_BASE + 0x008)
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 54aab401dbd..5f72ec91af2 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -36,6 +36,9 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -52,6 +55,8 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
#include "devices.h"
#include "crm_regs.h"
@@ -103,8 +108,158 @@ static int armadillo5x0_pins[] = {
/* I2C2 */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
+ /* OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+ /* USB host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
+/* USB */
+#if defined(CONFIG_USB_ULPI)
+
+#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
+#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+ /* Chip already enabled by hardware */
+ /* OTG phy reset*/
+ err = gpio_request(OTG_RESET, "USB-OTG-RESET");
+ if (err) {
+ pr_err("Failed to request the usb otg reset gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
+ if (err) {
+ pr_err("Failed to reset the usb otg phy\n");
+ goto otg_free_reset;
+ }
+
+ gpio_set_value(OTG_RESET, 0/*LOW*/);
+ mdelay(5);
+ gpio_set_value(OTG_RESET, 1/*HIGH*/);
+
+ return 0;
+
+otg_free_reset:
+ gpio_free(OTG_RESET);
+ return err;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+
+ /* Enable the chip */
+ err = gpio_request(USBH2_CS, "USB-H2-CS");
+ if (err) {
+ pr_err("Failed to request the usb host 2 CS gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
+ if (err) {
+ pr_err("Failed to drive the usb host 2 CS gpio\n");
+ goto h2_free_cs;
+ }
+
+ /* H2 phy reset*/
+ err = gpio_request(USBH2_RESET, "USB-H2-RESET");
+ if (err) {
+ pr_err("Failed to request the usb host 2 reset gpio\n");
+ goto h2_free_cs;
+ }
+
+ err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
+ if (err) {
+ pr_err("Failed to reset the usb host 2 phy\n");
+ goto h2_free_reset;
+ }
+
+ gpio_set_value(USBH2_RESET, 0/*LOW*/);
+ mdelay(5);
+ gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+
+ return 0;
+
+h2_free_reset:
+ gpio_free(USBH2_RESET);
+h2_free_cs:
+ gpio_free(USBH2_CS);
+ return err;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata = {
+ .init = usbotg_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .init = usbh2_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif /* CONFIG_USB_ULPI */
+
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
@@ -182,8 +337,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
static struct resource armadillo5x0_nor_flash_resource = {
.flags = IORESOURCE_MEM,
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + SZ_64M - 1,
+ .start = MX31_CS0_BASE_ADDR,
+ .end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
static struct platform_device armadillo5x0_nor_flash = {
@@ -311,8 +466,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
*/
static struct resource armadillo5x0_smc911x_resources[] = {
{
- .start = CS3_BASE_ADDR,
- .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
@@ -393,6 +548,17 @@ static void __init armadillo5x0_init(void)
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
+
+ /* USB */
+#if defined(CONFIG_USB_ULPI)
+ usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &usbotg_pdata);
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
}
static void __init armadillo5x0_timer_init(void)
@@ -406,9 +572,9 @@ static struct sys_timer armadillo5x0_timer = {
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.timer = &armadillo5x0_timer,
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index 6fa99ce3008..f085d5d1a6d 100644
--- a/arch/arm/mach-mx3/kzmarm11.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -46,13 +46,18 @@
#include "devices.h"
+#define KZM_ARM11_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX31_CS4) ?: \
+ IMX_IO_ADDRESS(x, MX31_CS5) ?: \
+ MX31_IO_ADDRESS(x))
+
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
/*
* KZM-ARM11-01 has an external UART on FPGA
*/
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = IO_ADDRESS(KZM_ARM11_16550),
+ .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
.irqflags = IRQ_TYPE_EDGE_RISING,
@@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void)
/*
* Unmask UART interrupt
*/
- tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+ tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
tmp |= 0x2;
- __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+ __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
return platform_device_register(&serial_device);
}
@@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
static struct resource kzm_smsc9118_resources[] = {
{
- .start = CS5_BASE_ADDR,
- .end = CS5_BASE_ADDR + SZ_128K - 1,
+ .start = MX31_CS5_BASE_ADDR,
+ .end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
{
@@ -222,15 +227,15 @@ static void __init kzm_board_init(void)
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE,
.type = MT_DEVICE
},
{
- .virtual = CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS5_BASE_ADDR),
- .length = CS5_SIZE,
+ .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+ .length = MX31_CS5_SIZE,
.type = MT_DEVICE
},
};
@@ -258,9 +263,9 @@ static struct sys_timer kzm_timer = {
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = kzm_map_io,
.init_irq = mx31_init_irq,
.init_machine = kzm_board_init,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 0f7a2f06bc2..f54af1e29ca 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -23,6 +23,9 @@
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -31,26 +34,96 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/board-mx31pdk.h>
+#include <mach/board-mx31_3ds.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
#include "devices.h"
/*!
- * @file mx31pdk.c
+ * @file mx31_3ds.c
*
* @brief This file contains the board-specific initialization routines.
*
* @ingroup System
*/
-static int mx31pdk_pins[] = {
+static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+ /* SPI 1 */
+ MX31_PIN_CSPI2_SCLK__SCLK,
+ MX31_PIN_CSPI2_MOSI__MOSI,
+ MX31_PIN_CSPI2_MISO__MISO,
+ MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS0__SS0,
+ MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
+ /* MC13783 IRQ */
+ IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+};
+
+/* Regulators */
+static struct regulator_init_data pwgtx_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ },
+};
+
+static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
+ {
+ .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
+ .init_data = &pwgtx_init,
+ }, {
+ .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
+ .init_data = &pwgtx_init,
+ },
+};
+
+/* MC13783 */
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+ .regulators = mx31_3ds_regulators,
+ .num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+ .flags = MC13783_USE_REGULATOR,
+};
+
+/* SPI */
+static int spi1_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi1_pdata = {
+ .chipselect = spi1_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
+};
+
+static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 1, /* SS2 */
+ .platform_data = &mc13783_pdata,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ .mode = SPI_CS_HIGH,
+ },
+};
+
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+ .width = 1,
+ .hw_ecc = 1,
+#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+ .flash_bbt = 1,
+#endif
};
static struct imxuart_platform_data uart_pdata = {
@@ -95,7 +168,7 @@ static struct platform_device smsc911x_device = {
* LEDs, switches, interrupts for Ethernet.
*/
-static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
{
uint32_t imr_val;
uint32_t int_valid;
@@ -163,7 +236,7 @@ static struct irq_chip expio_irq_chip = {
.unmask = expio_unmask_irq,
};
-static int __init mx31pdk_init_expio(void)
+static int __init mx31_3ds_init_expio(void)
{
int i;
int ret;
@@ -176,7 +249,7 @@ static int __init mx31pdk_init_expio(void)
return -ENODEV;
}
- pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+ pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
__raw_readw(CPLD_CODE_VER_REG));
/*
@@ -201,7 +274,7 @@ static int __init mx31pdk_init_expio(void)
set_irq_flags(i, IRQF_VALID);
}
set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
- set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
return 0;
}
@@ -209,16 +282,11 @@ static int __init mx31pdk_init_expio(void)
/*
* This structure defines the MX31 memory map.
*/
-static struct map_desc mx31pdk_io_desc[] __initdata = {
+static struct map_desc mx31_3ds_io_desc[] __initdata = {
{
- .virtual = SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
- .length = SPBA0_SIZE,
- .type = MT_DEVICE_NONSHARED,
- }, {
- .virtual = CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS5_BASE_ADDR),
- .length = CS5_SIZE,
+ .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+ .length = MX31_CS5_SIZE,
.type = MT_DEVICE,
},
};
@@ -226,10 +294,10 @@ static struct map_desc mx31pdk_io_desc[] __initdata = {
/*
* Set up static virtual mappings.
*/
-static void __init mx31pdk_map_io(void)
+static void __init mx31_3ds_map_io(void)
{
mx31_map_io();
- iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+ iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
}
/*!
@@ -237,35 +305,40 @@ static void __init mx31pdk_map_io(void)
*/
static void __init mxc_board_init(void)
{
- mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
- "mx31pdk");
+ mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
+ "mx31_3ds");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+
+ mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ spi_register_board_info(mx31_3ds_spi_devs,
+ ARRAY_SIZE(mx31_3ds_spi_devs));
- if (!mx31pdk_init_expio())
+ if (!mx31_3ds_init_expio())
platform_device_register(&smsc911x_device);
}
-static void __init mx31pdk_timer_init(void)
+static void __init mx31_3ds_timer_init(void)
{
mx31_clocks_init(26000000);
}
-static struct sys_timer mx31pdk_timer = {
- .init = mx31pdk_timer_init,
+static struct sys_timer mx31_3ds_timer = {
+ .init = mx31_3ds_timer_init,
};
/*
* The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31PDK data structure.
+ * initialize __mach_desc_MX31_3DS data structure.
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31pdk_map_io,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31_3ds_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
- .timer = &mx31pdk_timer,
+ .timer = &mx31_3ds_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 0497c152be1..b3d1a1895c2 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -60,7 +60,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
- .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+ .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
- .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+ .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
@@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq)
}
static struct irq_chip expio_irq_chip = {
+ .name = "EXPIO(CPLD)",
.ack = expio_ack_irq,
.mask = expio_mask_irq,
.unmask = expio_unmask_irq,
@@ -302,17 +303,14 @@ static struct regulator_init_data ldo1_data = {
.min_uV = 2800000,
.max_uV = 2800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
};
static struct regulator_consumer_supply ldo2_consumers[] = {
- {
- .supply = "AVDD",
- },
- {
- .supply = "HPVDD",
- },
+ { .supply = "AVDD", .dev_name = "1-001a" },
+ { .supply = "HPVDD", .dev_name = "1-001a" },
};
/* CODEC and SIM */
@@ -322,6 +320,7 @@ static struct regulator_init_data ldo2_data = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@@ -382,8 +381,6 @@ static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
static int mx31_wm8350_init(struct wm8350 *wm8350)
{
- int i;
-
wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
@@ -419,10 +416,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_OFF);
- /* Fix up for our own supplies. */
- for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
- ldo2_consumers[i].dev = wm8350->dev;
-
wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
@@ -459,6 +452,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
+ .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
@@ -489,19 +483,27 @@ static void mxc_init_i2c(void)
}
#endif
+static unsigned int ssi_pins[] = {
+ MX31_PIN_SFS5__SFS5,
+ MX31_PIN_SCK5__SCK5,
+ MX31_PIN_SRXD5__SRXD5,
+ MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+ mxc_register_device(&imx_ssi_device0, NULL);
+ mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
/*!
* This structure defines static mappings for the i.MX31ADS board.
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
- .virtual = SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
- .length = SPBA0_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE / 2,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE / 2,
.type = MT_DEVICE
},
};
@@ -529,6 +531,7 @@ static void __init mxc_board_init(void)
mxc_init_extuart();
mxc_init_imx_uart();
mxc_init_i2c();
+ mxc_init_audio();
}
static void __init mx31ads_timer_init(void)
@@ -546,9 +549,9 @@ static struct sys_timer mx31ads_timer = {
*/
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io,
.init_irq = mx31ads_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 9ce029f554b..80847b04c06 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -57,8 +57,8 @@
static struct resource smsc91x_resources[] = {
{
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0xffff,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 0xffff,
.flags = IORESOURCE_MEM,
},
{
@@ -195,9 +195,9 @@ static struct sys_timer mx31lilly_timer = {
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mx31lilly_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index def6b673659..2b6d1140087 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
static struct resource smsc911x_resources[] = {
{
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0x100,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
@@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
* USB
*/
+#if defined(CONFIG_USB_ULPI)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
+#endif
/*
* NOR flash
@@ -212,14 +214,9 @@ static struct platform_device physmap_flash_device = {
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
- .virtual = SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
- .length = SPBA0_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE,
.type = MT_DEVICE
}
};
@@ -261,11 +258,13 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxc_spi_device1, &spi1_pdata);
spi_register_board_info(&mc13783_spi_dev, 1);
+#if defined(CONFIG_USB_ULPI)
/* USB */
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
@@ -288,9 +287,9 @@ struct sys_timer mx31lite_timer = {
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index b7052914593..fccb9207b78 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
+#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -96,9 +97,6 @@ static unsigned int moboard_pins[] = {
/* LEDs */
MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
- /* SEL */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
/* SPI1 */
MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
@@ -346,13 +344,13 @@ static struct fsl_usb2_platform_data usb_pdata = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
+#if defined(CONFIG_USB_ULPI)
+
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
static int moboard_usbh2_hw_init(struct platform_device *pdev)
{
- int ret = gpio_request(USBH2_EN_B, "usbh2-en");
- if (ret)
- return ret;
+ int ret;
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
@@ -369,6 +367,9 @@ static int moboard_usbh2_hw_init(struct platform_device *pdev)
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+ ret = gpio_request(USBH2_EN_B, "usbh2-en");
+ if (ret)
+ return ret;
gpio_direction_output(USBH2_EN_B, 0);
return 0;
@@ -392,8 +393,11 @@ static int __init moboard_usbh2_init(void)
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
- return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+ return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
}
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
static struct gpio_led mx31moboard_leds[] = {
@@ -426,34 +430,6 @@ static struct platform_device mx31moboard_leds_device = {
},
};
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void mx31moboard_init_sel_gpios(void)
-{
- if (!gpio_request(SEL0, "sel0")) {
- gpio_direction_input(SEL0);
- gpio_export(SEL0, true);
- }
-
- if (!gpio_request(SEL1, "sel1")) {
- gpio_direction_input(SEL1);
- gpio_export(SEL1, true);
- }
-
- if (!gpio_request(SEL2, "sel2")) {
- gpio_direction_input(SEL2);
- gpio_export(SEL2, true);
- }
-
- if (!gpio_request(SEL3, "sel3")) {
- gpio_direction_input(SEL3);
- gpio_export(SEL3, true);
- }
-}
-
static struct ipu_platform_data mx3_ipu_data = {
.irq_base = MXC_IPU_IRQ_START,
};
@@ -513,8 +489,6 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxc_uart_device4, &uart4_pdata);
- mx31moboard_init_sel_gpios();
-
mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
@@ -547,6 +521,9 @@ static void __init mxc_board_init(void)
case MX31MARXBOT:
mx31moboard_marxbot_init();
break;
+ case MX31SMARTBOT:
+ mx31moboard_smartbot_init();
+ break;
default:
printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
mx31moboard_baseboard);
@@ -564,9 +541,9 @@ struct sys_timer mx31moboard_timer = {
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c
index 0bbc65ea23c..bcac84d4dca 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35pdk.c
@@ -106,9 +106,9 @@ struct sys_timer mx35pdk_timer = {
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX35_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 6cbaabedf38..2df1ec55a97 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -33,6 +33,9 @@
#include <linux/irq.h>
#include <linux/fsl_devices.h>
#include <linux/can/platform/sja1000.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/gfp.h>
#include <media/soc_camera.h>
@@ -51,6 +54,8 @@
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
#include "devices.h"
#include "pcm037.h"
@@ -172,19 +177,7 @@ static unsigned int pcm037_pins[] = {
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
/* GPIO */
IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm037_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static int usbotg_pins[] = {
+ /* OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
@@ -197,39 +190,29 @@ static int usbotg_pins[] = {
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
+ /* USB host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
-/* USB OTG HS port */
-static int __init gpio_usbotg_hs_activate(void)
-{
- int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
- ARRAY_SIZE(usbotg_pins), "usbotg");
-
- if (ret < 0) {
- printk(KERN_ERR "Cannot set up OTG pins\n");
- return ret;
- }
-
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- return 0;
-}
+static struct physmap_flash_data pcm037_flash_data = {
+ .width = 2,
+};
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
+static struct resource pcm037_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device pcm037_flash = {
@@ -248,8 +231,8 @@ static struct imxuart_platform_data uart_pdata = {
static struct resource smsc911x_resources[] = {
{
- .start = CS1_BASE_ADDR + 0x300,
- .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+ .start = MX31_CS1_BASE_ADDR + 0x300,
+ .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
@@ -281,8 +264,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
};
static struct resource pcm038_sram_resource = {
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 512 * 1024 - 1,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
@@ -322,16 +305,25 @@ static int pcm037_camera_power(struct device *dev, int on)
return 0;
}
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
{
I2C_BOARD_INFO("mt9t031", 0x5d),
+ }, {
+ I2C_BOARD_INFO("mt9v022", 0x48),
},
};
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm037_i2c_camera[1],
+ .i2c_adapter_id = 2,
+ .module_name = "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
.bus_id = 0, /* Must match with the camera ID */
.power = pcm037_camera_power,
- .board_info = &pcm037_i2c_2_devices[0],
+ .board_info = &pcm037_i2c_camera[0],
.i2c_adapter_id = 2,
.module_name = "mt9t031",
};
@@ -345,11 +337,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
}
};
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
- .platform_data = &iclink,
+ .platform_data = &iclink_mt9t031,
+ },
+};
+
+static struct platform_device pcm037_mt9v022 = {
+ .name = "soc-camera-pdrv",
+ .id = 1,
+ .dev = {
+ .platform_data = &iclink_mt9v022,
},
};
@@ -449,7 +449,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
- &pcm037_camera,
+ &pcm037_mt9t031,
+ &pcm037_mt9v022,
};
static struct ipu_platform_data mx3_ipu_data = {
@@ -518,8 +519,8 @@ static struct mx3fb_platform_data mx3fb_pdata = {
static struct resource pcm970_sja1000_resources[] = {
{
- .start = CS5_BASE_ADDR,
- .end = CS5_BASE_ADDR + 0x100 - 1,
+ .start = MX31_CS5_BASE_ADDR,
+ .end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
@@ -543,16 +544,65 @@ static struct platform_device pcm970_sja1000 = {
.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
};
+static struct mxc_usbh_platform_data otg_pdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm037_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", pcm037_otg_mode);
+
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
int ret;
+ u32 tmp;
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+ | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
+ mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
+ mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
+ mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
+ mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
+
if (pcm037_variant() == PCM037_EET)
mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
@@ -590,8 +640,6 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
- if (!gpio_usbotg_hs_activate())
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
/* CSI */
/* Camera power: default - off */
@@ -599,12 +647,29 @@ static void __init mxc_board_init(void)
if (!ret)
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
else
- iclink.power = NULL;
+ iclink_mt9t031.power = NULL;
if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
mxc_register_device(&mx3_camera, &camera_pdata);
platform_device_register(&pcm970_sja1000);
+
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &otg_pdata);
+ }
+
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+ if (!otg_mode_host)
+ mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
}
static void __init pcm037_timer_init(void)
@@ -618,9 +683,9 @@ struct sys_timer pcm037_timer = {
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d386000fc4..8d386000fc4 100644
--- a/arch/arm/mach-mx3/pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index e3aa829be58..1bf1ec2eef5 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -26,8 +26,12 @@
#include <linux/gpio.h>
#include <linux/smc911x.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -44,6 +48,10 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
#include "devices.h"
@@ -205,6 +213,94 @@ static struct pad_desc pcm043_pads[] = {
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
/* gpio */
MX35_PAD_ATA_CS0__GPIO2_6,
+ /* USB host */
+ MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+ MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+ /* SSI */
+ MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+ MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+ MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+ MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define AC97_GPIO_TXFS (1 * 32 + 31)
+#define AC97_GPIO_TXD (1 * 32 + 28)
+#define AC97_GPIO_RESET (1 * 32 + 0)
+
+static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+ struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+ int ret;
+
+ ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+ if (ret) {
+ printk("failed to get GPIO_TXFS: %d\n", ret);
+ return;
+ }
+
+ mxc_iomux_v3_setup_pad(&txfs_gpio);
+
+ /* warm reset */
+ gpio_direction_output(AC97_GPIO_TXFS, 1);
+ udelay(2);
+ gpio_set_value(AC97_GPIO_TXFS, 0);
+
+ gpio_free(AC97_GPIO_TXFS);
+ mxc_iomux_v3_setup_pad(&txfs);
+}
+
+static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+ struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+ struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+ struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+ struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+ struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+ int ret;
+
+ ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+ if (ret)
+ goto err1;
+
+ ret = gpio_request(AC97_GPIO_TXD, "SSI");
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(AC97_GPIO_RESET, "SSI");
+ if (ret)
+ goto err3;
+
+ mxc_iomux_v3_setup_pad(&txfs_gpio);
+ mxc_iomux_v3_setup_pad(&txd_gpio);
+ mxc_iomux_v3_setup_pad(&reset_gpio);
+
+ gpio_direction_output(AC97_GPIO_TXFS, 0);
+ gpio_direction_output(AC97_GPIO_TXD, 0);
+
+ /* cold reset */
+ gpio_direction_output(AC97_GPIO_RESET, 0);
+ udelay(10);
+ gpio_direction_output(AC97_GPIO_RESET, 1);
+
+ mxc_iomux_v3_setup_pad(&txd);
+ mxc_iomux_v3_setup_pad(&txfs);
+
+ gpio_free(AC97_GPIO_RESET);
+err3:
+ gpio_free(AC97_GPIO_TXD);
+err2:
+ gpio_free(AC97_GPIO_TXFS);
+err1:
+ if (ret)
+ printk("%s failed with %d\n", __func__, ret);
+ mdelay(1);
+}
+
+static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+ .ac97_reset = pcm043_ac97_cold_reset,
+ .ac97_warm_reset = pcm043_ac97_warm_reset,
+ .flags = IMX_SSI_USE_AC97,
};
static struct mxc_nand_platform_data pcm037_nand_board_info = {
@@ -212,6 +308,37 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
.hw_ecc = 1,
};
+static struct mxc_usbh_platform_data otg_pdata = {
+ .portsc = MXC_EHCI_MODE_UTMI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+ .portsc = MXC_EHCI_MODE_SERIAL,
+ .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+ MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm043_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", pcm043_otg_mode);
+
/*
* Board specific initialization.
*/
@@ -219,10 +346,23 @@ static void __init mxc_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+ mxc_audmux_v2_configure_port(3,
+ MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ MXC_AUDMUX_V2_PTCR_TFSEL(0) |
+ MXC_AUDMUX_V2_PTCR_TFSDIR,
+ MXC_AUDMUX_V2_PDCR_RXDSEL(0));
+
+ mxc_audmux_v2_configure_port(0,
+ MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ MXC_AUDMUX_V2_PTCR_TCSEL(3) |
+ MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+ MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+ mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
mxc_register_device(&mxc_uart_device1, &uart_pdata);
@@ -235,6 +375,20 @@ static void __init mxc_board_init(void)
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &otg_pdata);
+ }
+
+ mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+#endif
+ if (!otg_mode_host)
+ mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
}
static void __init pcm043_timer_init(void)
@@ -248,9 +402,9 @@ struct sys_timer pcm043_timer = {
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX35_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/mach-qong.c
index 044511f1b9a..e5b5b8323a1 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -43,7 +43,7 @@
#define QONG_FPGA_VERSION(major, minor, rev) \
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-#define QONG_FPGA_BASEADDR CS1_BASE_ADDR
+#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
#define QONG_FPGA_PERIPH_SIZE (1 << 24)
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
@@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = {
};
static struct resource qong_flash_resource = {
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+ .start = MX31_CS0_BASE_ADDR,
+ .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
.flags = IORESOURCE_MEM,
};
@@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = {
};
static struct resource qong_nand_resource = {
- .start = CS3_BASE_ADDR,
- .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
@@ -198,9 +198,7 @@ static struct platform_device qong_nand_device = {
static void __init qong_init_nand_mtd(void)
{
/* init CS */
- __raw_writel(0x00004f00, CSCR_U(3));
- __raw_writel(0x20013b31, CSCR_L(3));
- __raw_writel(0x00020800, CSCR_A(3));
+ mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */
@@ -275,9 +273,9 @@ static struct sys_timer qong_timer = {
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index bedf5b8d976..6858a4f9806 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
.length = AIPS2_SIZE,
.type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+ .length = SPBA0_SIZE,
+ .type = MT_DEVICE_NONSHARED
},
};
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 694611d6b05..093c595ca58 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -28,7 +28,6 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
@@ -67,6 +66,13 @@ static unsigned int litekit_db_board_pins[] __initdata = {
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
};
/* UART */
@@ -79,11 +85,11 @@ static struct imxuart_platform_data uart_pdata __initdata = {
static int gpio_det, gpio_wp;
#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+ PAD_CTL_ODE_CMOS)
static int mxc_mmc1_get_ro(struct device *dev)
{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
}
static int mxc_mmc1_init(struct device *dev,
@@ -94,12 +100,17 @@ static int mxc_mmc1_init(struct device *dev,
gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
ret = gpio_request(gpio_det, "MMC detect");
if (ret)
@@ -113,7 +124,7 @@ static int mxc_mmc1_init(struct device *dev,
gpio_direction_input(gpio_wp);
ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
@@ -133,7 +144,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
}
static struct imxmmc_platform_data mmc_pdata = {
@@ -194,5 +205,6 @@ void __init mx31lite_db_init(void)
mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
mxc_register_device(&mxc_spi_device0, &spi0_pdata);
platform_device_register(&litekit_led_device);
+ mxc_register_device(&imx_wdt_device0, NULL);
}
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 8fc624f141c..11b906ce7ea 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
@@ -49,6 +50,9 @@ static unsigned int devboard_pins[] = {
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+ /* SEL */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
static struct imxuart_platform_data uart_pdata = {
@@ -108,6 +112,33 @@ static struct imxmmc_platform_data sdhc2_pdata = {
.exit = devboard_sdhc2_exit,
};
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void devboard_init_sel_gpios(void)
+{
+ if (!gpio_request(SEL0, "sel0")) {
+ gpio_direction_input(SEL0);
+ gpio_export(SEL0, true);
+ }
+
+ if (!gpio_request(SEL1, "sel1")) {
+ gpio_direction_input(SEL1);
+ gpio_export(SEL1, true);
+ }
+
+ if (!gpio_request(SEL2, "sel2")) {
+ gpio_direction_input(SEL2);
+ gpio_export(SEL2, true);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -179,7 +210,7 @@ static int __init devboard_usbh1_init(void)
usbh1_pdata.otg = otg;
- return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+ return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
/*
@@ -196,5 +227,7 @@ void __init mx31moboard_devboard_init(void)
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+ devboard_init_sel_gpios();
+
devboard_usbh1_init();
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 85184a35e67..ffb105e14d8 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/types.h>
@@ -66,6 +67,9 @@ static unsigned int marxbot_pins[] = {
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+ /* SEL */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -127,12 +131,12 @@ static struct imxmmc_platform_data sdhc2_pdata = {
static void dspics_resets_init(void)
{
if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
- gpio_direction_output(TRSLAT_RST_B, 1);
+ gpio_direction_output(TRSLAT_RST_B, 0);
gpio_export(TRSLAT_RST_B, false);
}
if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
- gpio_direction_output(DSPICS_RST_B, 1);
+ gpio_direction_output(DSPICS_RST_B, 0);
gpio_export(DSPICS_RST_B, false);
}
}
@@ -200,7 +204,7 @@ static int __init marxbot_cam_init(void)
int ret = gpio_request(CAM_CHOICE, "cam-choice");
if (ret)
return ret;
- gpio_direction_output(CAM_CHOICE, 1);
+ gpio_direction_output(CAM_CHOICE, 0);
ret = gpio_request(BASECAM_RST_B, "basecam-reset");
if (ret)
@@ -223,6 +227,34 @@ static int __init marxbot_cam_init(void)
return 0;
}
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void marxbot_init_sel_gpios(void)
+{
+ if (!gpio_request(SEL0, "sel0")) {
+ gpio_direction_input(SEL0);
+ gpio_export(SEL0, true);
+ }
+
+ if (!gpio_request(SEL1, "sel1")) {
+ gpio_direction_input(SEL1);
+ gpio_export(SEL1, true);
+ }
+
+ if (!gpio_request(SEL2, "sel2")) {
+ gpio_direction_input(SEL2);
+ gpio_export(SEL2, true);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
+
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -294,7 +326,7 @@ static int __init marxbot_usbh1_init(void)
usbh1_pdata.otg = otg;
- return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+ return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
/*
@@ -307,6 +339,8 @@ void __init mx31moboard_marxbot_init(void)
mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
"marxbot");
+ marxbot_init_sel_gpios();
+
dspics_resets_init();
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
new file mode 100644
index 00000000000..52a69fc8b14
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include <media/soc_camera.h>
+
+#include "devices.h"
+
+static unsigned int smartbot_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+ /* CSI */
+ MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+ MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+ /* ENABLES */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define CAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define CAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static int smartbot_cam_power(struct device *dev, int on)
+{
+ gpio_set_value(CAM_POWER, !on);
+ return 0;
+}
+
+static int smartbot_cam_reset(struct device *dev)
+{
+ gpio_set_value(CAM_RST_B, 0);
+ udelay(100);
+ gpio_set_value(CAM_RST_B, 1);
+ return 0;
+}
+
+static struct i2c_board_info smartbot_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("mt9t031", 0x5d),
+ },
+};
+
+static struct soc_camera_link base_iclink = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .power = smartbot_cam_power,
+ .reset = smartbot_cam_reset,
+ .board_info = &smartbot_i2c_devices[0],
+ .i2c_adapter_id = 0,
+ .module_name = "mt9t031",
+};
+
+static struct platform_device smartbot_camera[] = {
+ {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &base_iclink,
+ },
+ },
+};
+
+static struct platform_device *smartbot_cameras[] __initdata = {
+ &smartbot_camera[0],
+};
+
+static int __init smartbot_cam_init(void)
+{
+ int ret = gpio_request(CAM_RST_B, "cam-reset");
+ if (ret)
+ return ret;
+ gpio_direction_output(CAM_RST_B, 1);
+ ret = gpio_request(CAM_POWER, "cam-standby");
+ if (ret)
+ return ret;
+ gpio_direction_output(CAM_POWER, 0);
+
+ return 0;
+}
+
+#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void smartbot_resets_init(void)
+{
+ if (!gpio_request(POWER_EN, "power-enable")) {
+ gpio_direction_output(POWER_EN, 0);
+ gpio_export(POWER_EN, false);
+ }
+
+ if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
+ gpio_direction_output(DSPIC_RST_B, 0);
+ gpio_export(DSPIC_RST_B, false);
+ }
+
+ if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+ gpio_direction_output(TRSLAT_RST_B, 0);
+ gpio_export(TRSLAT_RST_B, false);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_smartbot_init(void)
+{
+ printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
+
+ mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
+ "smartbot");
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ smartbot_resets_init();
+
+ smartbot_cam_init();
+ platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
+}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-07 12:03:51 +0000