diff options
Diffstat (limited to 'arch/arm/mach-mx5/Kconfig')
| -rw-r--r-- | arch/arm/mach-mx5/Kconfig | 50 |
1 files changed, 34 insertions, 16 deletions
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index b4e7c58bbb3..af0c212e3c7 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -1,8 +1,9 @@ -if ARCH_MX503 || ARCH_MX51 +if ARCH_MX5 + # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single # image. So for most time, SOC_IMX50/51/53 should be used. -config ARCH_MX5 +config ARCH_MX51 bool config ARCH_MX50 @@ -19,7 +20,6 @@ config SOC_IMX50 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ - select ARCH_MX5 select ARCH_MX50 config SOC_IMX51 @@ -30,7 +30,7 @@ config SOC_IMX51 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ - select ARCH_MX5 + select ARCH_MX51 config SOC_IMX53 bool @@ -38,10 +38,8 @@ config SOC_IMX53 select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 - select ARCH_MX5 select ARCH_MX53 -if ARCH_MX50_SUPPORTED #comment "i.MX50 machines:" config MACH_MX50_RDP @@ -52,22 +50,29 @@ config MACH_MX50_RDP select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX - select IMX_HAVE_PLATFORM_FEC help Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX50_SUPPORTED - -if ARCH_MX51 comment "i.MX51 machines:" +config MACH_IMX51_DT + bool "Support i.MX51 platforms from device tree" + select SOC_IMX51 + select USE_OF + select MACH_MX51_BABBAGE + help + Include support for Freescale i.MX51 based platforms + using the device tree for discovery + config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX help @@ -91,8 +96,10 @@ config MACH_MX51_3DS config MACH_EUKREA_CPUIMX51 bool "Support Eukrea CPUIMX51 module" select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX help @@ -119,10 +126,12 @@ endchoice config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SPI_IMX select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX help Include support for Eukrea CPUIMX51SD platform. This includes specific configurations for the module and its peripherals. @@ -147,6 +156,8 @@ config MX51_EFIKA_COMMON bool select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_PATA_IMX select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI @@ -167,11 +178,20 @@ config MACH_MX51_EFIKASB Include support for Genesi Efika Smartbook. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX51 - -if ARCH_MX53_SUPPORTED comment "i.MX53 machines:" +config MACH_IMX53_DT + bool "Support i.MX53 platforms from device tree" + select SOC_IMX53 + select USE_OF + select MACH_MX53_ARD + select MACH_MX53_EVK + select MACH_MX53_LOCO + select MACH_MX53_SMD + help + Include support for Freescale i.MX53 based platforms + using the device tree for discovery + config MACH_MX53_EVK bool "Support MX53 EVK platforms" select SOC_IMX53 @@ -221,6 +241,4 @@ config MACH_MX53_ARD Include support for MX53 ARD platform. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX53_SUPPORTED - endif |