diff options
Diffstat (limited to 'arch/arm/mach-mx5/board-cpuimx51.c')
| -rw-r--r-- | arch/arm/mach-mx5/board-cpuimx51.c | 20 |
1 files changed, 11 insertions, 9 deletions
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index f8652ef25f8..d0296a94c47 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -60,7 +60,6 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), @@ -105,12 +104,9 @@ static struct platform_device serial_device = { .platform_data = serial_platform_data, }, }; -#endif static struct platform_device *devices[] __initdata = { -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) &serial_device, -#endif }; static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = { @@ -188,7 +184,10 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static int initialize_usbh1_port(struct platform_device *pdev) @@ -206,13 +205,16 @@ static int initialize_usbh1_port(struct platform_device *pdev) v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; static struct fsl_usb2_platform_data usb_pdata = { @@ -223,7 +225,6 @@ static struct fsl_usb2_platform_data usb_pdata = { static struct mxc_usbh_platform_data usbh1_config = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, - .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), }; static int otg_mode_host; @@ -298,7 +299,8 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") /* Maintainer: Eric Bénard <eric@eukrea.com> */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = eukrea_cpuimx51_init, .timer = &mxc_timer, + .init_machine = eukrea_cpuimx51_init, MACHINE_END |