diff options
Diffstat (limited to 'arch/arm/mach-mx5/board-cpuimx51.c')
| -rw-r--r-- | arch/arm/mach-mx5/board-cpuimx51.c | 28 |
1 files changed, 13 insertions, 15 deletions
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index e01af948e04..1fc11034804 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -22,21 +22,18 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/interrupt.h> -#include <linux/irq.h> #include <mach/eukrea-baseboards.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx51.h> -#include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include "devices-imx51.h" -#include "devices.h" #define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27) #define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28) @@ -57,7 +54,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), - .irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO), + .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -65,7 +62,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000), - .irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO), + .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -73,7 +70,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000), - .irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO), + .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -81,7 +78,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), + .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -167,7 +164,7 @@ static int initialize_otg_port(struct platform_device *pdev) void __iomem *usb_base; void __iomem *usbother_base; - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); if (!usb_base) return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -190,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) void __iomem *usb_base; void __iomem *usbother_base; - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); if (!usb_base) return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -206,17 +203,17 @@ static int initialize_usbh1_port(struct platform_device *pdev) MXC_EHCI_ITC_NO_THRESHOLD); } -static struct mxc_usbh_platform_data dr_utmi_config = { +static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, }; -static struct fsl_usb2_platform_data usb_pdata = { +static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; -static struct mxc_usbh_platform_data usbh1_config = { +static const struct mxc_usbh_platform_data usbh1_config __initconst = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, }; @@ -270,12 +267,12 @@ static void __init eukrea_cpuimx51_init(void) ARRAY_SIZE(eukrea_cpuimx51_i2c_devices)); if (otg_mode_host) - mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + imx51_add_mxc_ehci_otg(&dr_utmi_config); else { initialize_otg_port(NULL); - mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata); + imx51_add_fsl_usb2_udc(&usb_pdata); } - mxc_register_device(&mxc_usbh1_device, &usbh1_config); + imx51_add_mxc_ehci_hs(1, &usbh1_config); #ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD eukrea_mbimx51_baseboard_init(); @@ -297,6 +294,7 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, + .handle_irq = imx51_handle_irq, .timer = &mxc_timer, .init_machine = eukrea_cpuimx51_init, MACHINE_END |