diff options
Diffstat (limited to 'arch/arm/mach-mx5/board-mx51_babbage.c')
| -rw-r--r-- | arch/arm/mach-mx5/board-mx51_babbage.c | 38 |
1 files changed, 21 insertions, 17 deletions
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 11b0ff67f89..5c837603ff0 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -24,14 +24,12 @@ #include <mach/hardware.h> #include <mach/iomux-mx51.h> -#include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include "devices-imx51.h" -#include "devices.h" #include "cpu_op-mx51.h" #define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) @@ -176,7 +174,7 @@ static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; -static struct imxi2c_platform_data babbage_hsi2c_data = { +static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = { .bitrate = 400000, }; @@ -249,7 +247,7 @@ static int initialize_otg_port(struct platform_device *pdev) void __iomem *usb_base; void __iomem *usbother_base; - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); if (!usb_base) return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -272,7 +270,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) void __iomem *usb_base; void __iomem *usbother_base; - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); if (!usb_base) return -ENOMEM; usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -288,17 +286,17 @@ static int initialize_usbh1_port(struct platform_device *pdev) MXC_EHCI_ITC_NO_THRESHOLD); } -static struct mxc_usbh_platform_data dr_utmi_config = { +static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, }; -static struct fsl_usb2_platform_data usb_pdata = { +static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; -static struct mxc_usbh_platform_data usbh1_config = { +static const struct mxc_usbh_platform_data usbh1_config __initconst = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, }; @@ -351,22 +349,27 @@ static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = { .wp_type = ESDHC_WP_GPIO, }; +void __init imx51_babbage_common_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, + ARRAY_SIZE(mx51babbage_pads)); +} + /* * Board specific initialization. */ static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; - iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | - MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, + PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); imx51_soc_init(); #if defined(CONFIG_CPU_FREQ_IMX) get_cpu_op = mx51_get_cpu_op; #endif - mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, - ARRAY_SIZE(mx51babbage_pads)); + imx51_babbage_common_init(); imx51_add_imx_uart(0, &uart_pdata); imx51_add_imx_uart(1, NULL); @@ -381,17 +384,17 @@ static void __init mx51_babbage_init(void) imx51_add_imx_i2c(0, &babbage_i2c_data); imx51_add_imx_i2c(1, &babbage_i2c_data); - mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data); + imx51_add_hsi2c(&babbage_hsi2c_data); if (otg_mode_host) - mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + imx51_add_mxc_ehci_otg(&dr_utmi_config); else { initialize_otg_port(NULL); - mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata); + imx51_add_fsl_usb2_udc(&usb_pdata); } gpio_usbh1_active(); - mxc_register_device(&mxc_usbh1_device, &usbh1_config); + imx51_add_mxc_ehci_hs(1, &usbh1_config); /* setback USBH1_STP to be function */ mxc_iomux_v3_setup_pad(usbh1stp); babbage_usbhub_reset(); @@ -416,10 +419,11 @@ static struct sys_timer mx51_babbage_timer = { MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ - .boot_params = MX51_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, + .handle_irq = imx51_handle_irq, .timer = &mx51_babbage_timer, .init_machine = mx51_babbage_init, MACHINE_END |