diff options
Diffstat (limited to 'arch/arm/mach-mx5/board-mx53_evk.c')
| -rw-r--r-- | arch/arm/mach-mx5/board-mx53_evk.c | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index fa97d0d5dd0..caee04c0823 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -21,6 +21,11 @@ #include <linux/init.h> #include <linux/clk.h> +#include <linux/fec.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> #include <mach/common.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -29,6 +34,10 @@ #include <mach/imx-uart.h> #include <mach/iomux-mx53.h> +#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) +#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) +#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) + #include "crm_regs.h" #include "devices-imx53.h" @@ -47,6 +56,14 @@ static iomux_v3_cfg_t mx53_evk_pads[] = { MX53_PAD_ATA_CS_1__UART3_RXD, MX53_PAD_ATA_DA_1__UART3_CTS, MX53_PAD_ATA_DA_2__UART3_RTS, + + MX53_PAD_EIM_D16__CSPI1_SCLK, + MX53_PAD_EIM_D17__CSPI1_MISO, + MX53_PAD_EIM_D18__CSPI1_MOSI, + + /* ecspi chip select lines */ + MX53_PAD_EIM_EB2__GPIO_2_30, + MX53_PAD_EIM_D19__GPIO_3_19, }; static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { @@ -60,11 +77,68 @@ static inline void mx53_evk_init_uart(void) imx53_add_imx_uart(2, &mx53_evk_uart_pdata); } +static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = { + .bitrate = 100000, +}; + +static inline void mx53_evk_fec_reset(void) +{ + int ret; + + /* reset FEC PHY */ + ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); + return; + } + gpio_direction_output(SMD_FEC_PHY_RST, 0); + gpio_set_value(SMD_FEC_PHY_RST, 0); + msleep(1); + gpio_set_value(SMD_FEC_PHY_RST, 1); +} + +static struct fec_platform_data mx53_evk_fec_pdata = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static struct spi_board_info mx53_evk_spi_board_info[] __initdata = { + { + .modalias = "mtd_dataflash", + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + .platform_data = NULL, + }, +}; + +static int mx53_evk_spi_cs[] = { + EVK_ECSPI1_CS0, + EVK_ECSPI1_CS1, +}; + +static const struct spi_imx_master mx53_evk_spi_data __initconst = { + .chipselect = mx53_evk_spi_cs, + .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs), +}; + static void __init mx53_evk_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, ARRAY_SIZE(mx53_evk_pads)); mx53_evk_init_uart(); + mx53_evk_fec_reset(); + imx53_add_fec(&mx53_evk_fec_pdata); + + imx53_add_imx_i2c(0, &mx53_evk_i2c_data); + imx53_add_imx_i2c(1, &mx53_evk_i2c_data); + + imx53_add_sdhci_esdhc_imx(0, NULL); + imx53_add_sdhci_esdhc_imx(1, NULL); + + spi_register_board_info(mx53_evk_spi_board_info, + ARRAY_SIZE(mx53_evk_spi_board_info)); + imx53_add_ecspi(0, &mx53_evk_spi_data); } static void __init mx53_evk_timer_init(void) |