diff options
Diffstat (limited to 'arch/arm/mach-mx5/mx51_efika.c')
| -rw-r--r-- | arch/arm/mach-mx5/mx51_efika.c | 22 |
1 files changed, 10 insertions, 12 deletions
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index c9209454807..ec6ca91b299 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -34,14 +34,12 @@ #include <linux/usb/ulpi.h> #include <mach/ulpi.h> -#include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include "devices-imx51.h" -#include "devices.h" #include "efika.h" #include "cpu_op-mx51.h" @@ -133,7 +131,7 @@ static int initialize_otg_port(struct platform_device *pdev) u32 v; void __iomem *usb_base; void __iomem *usbother_base; - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); if (!usb_base) return -ENOMEM; usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); @@ -150,7 +148,7 @@ static int initialize_otg_port(struct platform_device *pdev) return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); } -static struct mxc_usbh_platform_data dr_utmi_config = { +static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, }; @@ -170,7 +168,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) gpio_set_value(EFIKAMX_USBH1_STP, 1); msleep(1); - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); /* The clock for the USBH1 ULPI port will come externally */ @@ -189,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); } -static struct mxc_usbh_platform_data usbh1_config = { +static struct mxc_usbh_platform_data usbh1_config __initdata = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, }; @@ -217,9 +215,9 @@ static void __init mx51_efika_usb(void) usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); - mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + imx51_add_mxc_ehci_otg(&dr_utmi_config); if (usbh1_config.otg) - mxc_register_device(&mxc_usbh1_device, &usbh1_config); + imx51_add_mxc_ehci_hs(1, &usbh1_config); } static struct mtd_partition mx51_efika_spi_nor_partitions[] = { @@ -567,7 +565,7 @@ static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { }; static struct mc13xxx_platform_data mx51_efika_mc13892_data = { - .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR, + .flags = MC13XXX_USE_RTC, .regulators = { .num_regulators = ARRAY_SIZE(mx51_efika_regulators), .regulators = mx51_efika_regulators, @@ -589,7 +587,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 0, .platform_data = &mx51_efika_mc13892_data, - .irq = gpio_to_irq(EFIKAMX_PMIC), + .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC), }, }; @@ -609,7 +607,6 @@ void __init efika_board_common_init(void) ARRAY_SIZE(mx51efika_pads)); imx51_add_imx_uart(0, &uart_pdata); mx51_efika_usb(); - imx51_add_sdhci_esdhc_imx(0, NULL); /* FIXME: comes from original code. check this. */ if (mx51_revision() < IMX_CHIP_REVISION_2_0) @@ -627,8 +624,9 @@ void __init efika_board_common_init(void) ARRAY_SIZE(mx51_efika_spi_board_info)); imx51_add_ecspi(0, &mx51_efika_spi_pdata); + imx51_add_pata_imx(); + #if defined(CONFIG_CPU_FREQ_IMX) get_cpu_op = mx51_get_cpu_op; #endif } - |