12 files changed, 364 insertions, 28 deletions

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 55254b6e946..de4fa992fc3 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -50,6 +50,7 @@ config MACH_MX51_BABBAGE
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
@@ -77,6 +78,7 @@ choice
 config MACH_EUKREA_MBIMX51_BASEBOARD
 	prompt "Eukrea MBIMX51 development board"
 	bool
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -124,10 +126,28 @@ config MACH_MX53_EVK
 	bool "Support MX53 EVK platforms"
 	select SOC_IMX53
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX53 EVK platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX53_SMD
+	bool "Support MX53 SMD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX53 SMD platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_LOCO
+	bool "Support MX53 LOCO platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX53 LOCO platform. This includes specific
+	  configurations for the board and its peripherals.
 
 config MACH_MX50_RDP
 	bool "Support MX50 reference design platform"
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 0c398baf11f..0d43be98e51 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
 obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
+obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
+obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index e42bd2eb034..49d64484237 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -12,7 +12,6 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 
 #include <asm/mach-types.h>
@@ -120,14 +119,14 @@ static int mx51_3ds_board_keymap[] = {
 	KEY(3, 5, KEY_BACK)
 };
 
-static struct matrix_keymap_data mx51_3ds_map_data = {
+static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
 	.keymap		= mx51_3ds_board_keymap,
 	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
 };
 
 static void mxc_init_keypad(void)
 {
-	mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+	imx51_add_imx_keypad(&mx51_3ds_map_data);
 }
 #else
 static inline void mxc_init_keypad(void)
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index fa97d0d5dd0..caee04c0823 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -21,6 +21,11 @@
 
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/fec.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -29,6 +34,10 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
+#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
+#define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
+
 #include "crm_regs.h"
 #include "devices-imx53.h"
 
@@ -47,6 +56,14 @@ static iomux_v3_cfg_t mx53_evk_pads[] = {
 	MX53_PAD_ATA_CS_1__UART3_RXD,
 	MX53_PAD_ATA_DA_1__UART3_CTS,
 	MX53_PAD_ATA_DA_2__UART3_RTS,
+
+	MX53_PAD_EIM_D16__CSPI1_SCLK,
+	MX53_PAD_EIM_D17__CSPI1_MISO,
+	MX53_PAD_EIM_D18__CSPI1_MOSI,
+
+	/* ecspi chip select lines */
+	MX53_PAD_EIM_EB2__GPIO_2_30,
+	MX53_PAD_EIM_D19__GPIO_3_19,
 };
 
 static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
@@ -60,11 +77,68 @@ static inline void mx53_evk_init_uart(void)
 	imx53_add_imx_uart(2, &mx53_evk_uart_pdata);
 }
 
+static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
+static inline void mx53_evk_fec_reset(void)
+{
+	int ret;
+
+	/* reset FEC PHY */
+	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(SMD_FEC_PHY_RST, 0);
+	gpio_set_value(SMD_FEC_PHY_RST, 0);
+	msleep(1);
+	gpio_set_value(SMD_FEC_PHY_RST, 1);
+}
+
+static struct fec_platform_data mx53_evk_fec_pdata = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
+	{
+		.modalias = "mtd_dataflash",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+		.platform_data = NULL,
+	},
+};
+
+static int mx53_evk_spi_cs[] = {
+	EVK_ECSPI1_CS0,
+	EVK_ECSPI1_CS1,
+};
+
+static const struct spi_imx_master mx53_evk_spi_data __initconst = {
+	.chipselect     = mx53_evk_spi_cs,
+	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
+};
+
 static void __init mx53_evk_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
 					ARRAY_SIZE(mx53_evk_pads));
 	mx53_evk_init_uart();
+	mx53_evk_fec_reset();
+	imx53_add_fec(&mx53_evk_fec_pdata);
+
+	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
+	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
+
+	imx53_add_sdhci_esdhc_imx(0, NULL);
+	imx53_add_sdhci_esdhc_imx(1, NULL);
+
+	spi_register_board_info(mx53_evk_spi_board_info,
+		ARRAY_SIZE(mx53_evk_spi_board_info));
+	imx53_add_ecspi(0, &mx53_evk_spi_data);
 }
 
 static void __init mx53_evk_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
new file mode 100644
index 00000000000..d1348e04ace
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/fec.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx53.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "crm_regs.h"
+#include "devices-imx53.h"
+
+#define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+
+static iomux_v3_cfg_t mx53_loco_pads[] = {
+	MX53_PAD_CSI0_D10__UART1_TXD,
+	MX53_PAD_CSI0_D11__UART1_RXD,
+	MX53_PAD_ATA_DIOW__UART1_TXD,
+	MX53_PAD_ATA_DMACK__UART1_RXD,
+
+	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
+	MX53_PAD_ATA_DMARQ__UART2_TXD,
+	MX53_PAD_ATA_DIOR__UART2_RTS,
+	MX53_PAD_ATA_INTRQ__UART2_CTS,
+
+	MX53_PAD_ATA_CS_0__UART3_TXD,
+	MX53_PAD_ATA_CS_1__UART3_RXD,
+	MX53_PAD_ATA_DA_1__UART3_CTS,
+	MX53_PAD_ATA_DA_2__UART3_RTS,
+};
+
+static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mx53_loco_init_uart(void)
+{
+	imx53_add_imx_uart(0, &mx53_loco_uart_data);
+	imx53_add_imx_uart(1, &mx53_loco_uart_data);
+	imx53_add_imx_uart(2, &mx53_loco_uart_data);
+}
+
+static inline void mx53_loco_fec_reset(void)
+{
+	int ret;
+
+	/* reset FEC PHY */
+	ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(LOCO_FEC_PHY_RST, 0);
+	msleep(1);
+	gpio_set_value(LOCO_FEC_PHY_RST, 1);
+}
+
+static struct fec_platform_data mx53_loco_fec_data = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static void __init mx53_loco_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
+					ARRAY_SIZE(mx53_loco_pads));
+	mx53_loco_init_uart();
+	mx53_loco_fec_reset();
+	imx53_add_fec(&mx53_loco_fec_data);
+}
+
+static void __init mx53_loco_timer_init(void)
+{
+	mx53_clocks_init(32768, 24000000, 0, 0);
+}
+
+static struct sys_timer mx53_loco_timer = {
+	.init	= mx53_loco_timer_init,
+};
+
+MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
+	.map_io = mx53_map_io,
+	.init_irq = mx53_init_irq,
+	.init_machine = mx53_loco_board_init,
+	.timer = &mx53_loco_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
new file mode 100644
index 00000000000..7970f7a4858
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/fec.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx53.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "crm_regs.h"
+#include "devices-imx53.h"
+
+#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+
+static iomux_v3_cfg_t mx53_smd_pads[] = {
+	MX53_PAD_CSI0_D10__UART1_TXD,
+	MX53_PAD_CSI0_D11__UART1_RXD,
+	MX53_PAD_ATA_DIOW__UART1_TXD,
+	MX53_PAD_ATA_DMACK__UART1_RXD,
+
+	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
+	MX53_PAD_ATA_DMARQ__UART2_TXD,
+	MX53_PAD_ATA_DIOR__UART2_RTS,
+	MX53_PAD_ATA_INTRQ__UART2_CTS,
+
+	MX53_PAD_ATA_CS_0__UART3_TXD,
+	MX53_PAD_ATA_CS_1__UART3_RXD,
+	MX53_PAD_ATA_DA_1__UART3_CTS,
+	MX53_PAD_ATA_DA_2__UART3_RTS,
+};
+
+static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mx53_smd_init_uart(void)
+{
+	imx53_add_imx_uart(0, &mx53_smd_uart_data);
+	imx53_add_imx_uart(1, &mx53_smd_uart_data);
+	imx53_add_imx_uart(2, &mx53_smd_uart_data);
+}
+
+static inline void mx53_smd_fec_reset(void)
+{
+	int ret;
+
+	/* reset FEC PHY */
+	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(SMD_FEC_PHY_RST, 0);
+	msleep(1);
+	gpio_set_value(SMD_FEC_PHY_RST, 1);
+}
+
+static struct fec_platform_data mx53_smd_fec_data = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static void __init mx53_smd_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
+					ARRAY_SIZE(mx53_smd_pads));
+	mx53_smd_init_uart();
+	mx53_smd_fec_reset();
+	imx53_add_fec(&mx53_smd_fec_data);
+}
+
+static void __init mx53_smd_timer_init(void)
+{
+	mx53_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mx53_smd_timer = {
+	.init	= mx53_smd_timer_init,
+};
+
+MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
+	.map_io = mx53_map_io,
+	.init_irq = mx53_init_irq,
+	.init_machine = mx53_smd_board_init,
+	.timer = &mx53_smd_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 785e1a33618..0a19e7567c0 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1191,6 +1191,11 @@ DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
 DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
 	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
 
+DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
 	NULL, NULL, &ipg_clk, NULL);
@@ -1283,6 +1288,8 @@ static struct clk_lookup mx51_lookups[] = {
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
+	_REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
@@ -1295,7 +1302,7 @@ static struct clk_lookup mx51_lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
-	_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
+	_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
 	_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
 	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
@@ -1326,6 +1333,13 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk)
+	_REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk)
+	_REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
 };
 
 static void clk_tree_init(void)
@@ -1363,7 +1377,6 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 
 	clk_tree_init();
 
-	clk_set_parent(&uart_root_clk, &pll3_sw_clk);
 	clk_enable(&cpu_clk);
 	clk_enable(&main_bus_clk);
 
@@ -1406,6 +1419,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 
 	clk_tree_init();
 
+	clk_set_parent(&uart_root_clk, &pll3_sw_clk);
 	clk_enable(&cpu_clk);
 	clk_enable(&main_bus_clk);
 
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index 6302e467000..7fff485e560 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -47,3 +47,11 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
 extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst;
 #define imx51_add_imx2_wdt(id, pdata)	\
 	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
+
+extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst;
+#define imx51_add_mxc_pwm(id)	\
+	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
+
+extern const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst;
+#define imx51_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 9d0ec2507fa..8639735a117 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -8,6 +8,24 @@
 #include <mach/mx53.h>
 #include <mach/devices-common.h>
 
+extern const struct imx_fec_data imx53_fec_data __initconst;
+#define imx53_add_fec(pdata)   \
+	imx_add_fec(&imx53_fec_data, pdata)
+
 extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst;
 #define imx53_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
+
+
+extern const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst;
+#define imx53_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
+
+extern const struct imx_sdhci_esdhc_imx_data
+imx53_sdhci_esdhc_imx_data[] __initconst;
+#define imx53_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
+#define imx53_add_ecspi(id, pdata)	\
+	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 1bda5cb339d..153ada53e57 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -120,25 +120,6 @@ struct platform_device mxc_usbh2_device = {
 	},
 };
 
-static struct resource mxc_kpp_resources[] = {
-	{
-		.start = MX51_MXC_INT_KPP,
-		.end = MX51_MXC_INT_KPP,
-		.flags = IORESOURCE_IRQ,
-	} , {
-		.start = MX51_KPP_BASE_ADDR,
-		.end = MX51_KPP_BASE_ADDR + 0x8 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_keypad_device = {
-	.name = "imx-keypad",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_kpp_resources),
-	.resource = mxc_kpp_resources,
-};
-
 static struct mxc_gpio_port mxc_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index 16891aa3573..55a5129bc29 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -3,4 +3,3 @@ extern struct platform_device mxc_usbh1_device;
 extern struct platform_device mxc_usbh2_device;
 extern struct platform_device mxc_usbdr_udc_device;
 extern struct platform_device mxc_hsi2c_device;
-extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index c96d018ff8a..e83ffadb65f 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -21,7 +21,6 @@
 #include <linux/fsl_devices.h>
 #include <linux/i2c/tsc2007.h>
 #include <linux/leds.h>
-#include <linux/input/matrix_keypad.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -157,7 +156,7 @@ static int mbimx51_keymap[] = {
 	KEY(3, 3, KEY_ENTER),
 };
 
-static struct matrix_keymap_data mbimx51_map_data = {
+static const struct matrix_keymap_data mbimx51_map_data __initconst = {
 	.keymap		= mbimx51_keymap,
 	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
 };
@@ -209,7 +208,7 @@ void __init eukrea_mbimx51_baseboard_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
+	imx51_add_imx_keypad(&mbimx51_map_data);
 
 	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
 	gpio_direction_input(MBIMX51_TSC2007_GPIO);