summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-mx5
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-mx5')
-rw-r--r--arch/arm/mach-mx5/Kconfig42
-rw-r--r--arch/arm/mach-mx5/Makefile3
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51.c25
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51sd.c331
-rw-r--r--arch/arm/mach-mx5/board-mx51_3ds.c44
-rw-r--r--arch/arm/mach-mx5/board-mx51_babbage.c74
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikamx.c119
-rw-r--r--arch/arm/mach-mx5/clock-mx51.c391
-rw-r--r--arch/arm/mach-mx5/cpu.c19
-rw-r--r--arch/arm/mach-mx5/devices-imx51.h42
-rw-r--r--arch/arm/mach-mx5/devices.c114
-rw-r--r--arch/arm/mach-mx5/devices.h6
-rw-r--r--arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c30
-rw-r--r--arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c166
14 files changed, 1168 insertions, 238 deletions
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 0848db5dd36..a2df9ac3799 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -5,11 +5,14 @@ config ARCH_MX51
default y
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
comment "MX5 platforms:"
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
@@ -17,6 +20,8 @@ config MACH_MX51_BABBAGE
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
help
Include support for MX51PDK (3DS) platform. This includes specific
@@ -24,6 +29,10 @@ config MACH_MX51_3DS
config MACH_EUKREA_CPUIMX51
bool "Support Eukrea CPUIMX51 module"
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51 platform. This includes
specific configurations for the module and its peripherals.
@@ -36,10 +45,43 @@ choice
config MACH_EUKREA_MBIMX51_BASEBOARD
prompt "Eukrea MBIMX51 development board"
bool
+ select IMX_HAVE_PLATFORM_ESDHC
help
This adds board specific devices that can be found on Eukrea's
MBIMX51 evaluation board.
endchoice
+config MACH_EUKREA_CPUIMX51SD
+ bool "Support Eukrea CPUIMX51SD module"
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ help
+ Include support for Eukrea CPUIMX51SD platform. This includes
+ specific configurations for the module and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX51SD
+ default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+ prompt "Eukrea MBIMXSD development board"
+ bool
+ select IMX_HAVE_PLATFORM_ESDHC
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_MX51_EFIKAMX
+ bool "Support MX51 Genesi Efika MX nettop"
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for Genesi Efika MX nettop. This includes specific
+ configurations for the board and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 86c66e7f52f..1769c161a60 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -9,3 +9,6 @@ obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 623607a20f5..6a9792fd0a7 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -28,9 +28,7 @@
#include <mach/eukrea-baseboards.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
#include <mach/mxc_ehci.h>
#include <asm/irq.h>
@@ -39,6 +37,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "devices-imx51.h"
#include "devices.h"
#define CPUIMX51_USBH1_STP (0*32 + 27)
@@ -109,7 +108,6 @@ static struct platform_device serial_device = {
#endif
static struct platform_device *devices[] __initdata = {
- &mxc_fec_device,
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
&serial_device,
#endif
@@ -148,11 +146,19 @@ static struct pad_desc eukrea_cpuimx51_pads[] = {
MX51_PAD_USBH1_STP__USBH1_STP,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct mxc_nand_platform_data
+ eukrea_cpuimx51_nand_board_info __initconst = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = {
+static const
+struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
.bitrate = 100000,
};
@@ -239,7 +245,9 @@ static void __init eukrea_cpuimx51_init(void)
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
ARRAY_SIZE(eukrea_cpuimx51_pads));
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx51_add_imx_uart(0, &uart_pdata);
+ imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
+
gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
gpio_direction_input(CPUIMX51_QUARTA_GPIO);
gpio_free(CPUIMX51_QUARTA_GPIO);
@@ -253,9 +261,10 @@ static void __init eukrea_cpuimx51_init(void)
gpio_direction_input(CPUIMX51_QUARTD_GPIO);
gpio_free(CPUIMX51_QUARTD_GPIO);
+ imx51_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data);
+ imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
@@ -283,8 +292,6 @@ static struct sys_timer mxc_timer = {
MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .phys_io = MX51_AIPS1_BASE_ADDR,
- .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
new file mode 100644
index 00000000000..4b3a6119c5f
--- /dev/null
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -0,0 +1,331 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * based on board-mx51_babbage.c which is
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define USBH1_RST (1*32 + 28)
+#define ETH_RST (1*32 + 31)
+#define TSC2007_IRQGPIO (2*32 + 12)
+#define CAN_IRQGPIO (0*32 + 1)
+#define CAN_RST (3*32 + 15)
+#define CAN_NCS (3*32 + 24)
+#define CAN_RXOBF (0*32 + 4)
+#define CAN_RX1BF (0*32 + 6)
+#define CAN_TXORTS (0*32 + 7)
+#define CAN_TX1RTS (0*32 + 8)
+#define CAN_TX2RTS (0*32 + 9)
+#define I2C_SCL (3*32 + 16)
+#define I2C_SDA (3*32 + 17)
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET 0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
+
+#define MX51_USB_PLLDIV_12_MHZ 0x00
+#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
+#define MX51_USB_PLL_DIV_24_MHZ 0x02
+
+#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \
+ MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
+
+static struct pad_desc eukrea_cpuimx51sd_pads[] = {
+ /* UART1 */
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ MX51_PAD_UART1_RTS__UART1_RTS,
+ MX51_PAD_UART1_CTS__UART1_CTS,
+
+ /* USB HOST1 */
+ MX51_PAD_USBH1_CLK__USBH1_CLK,
+ MX51_PAD_USBH1_DIR__USBH1_DIR,
+ MX51_PAD_USBH1_NXT__USBH1_NXT,
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+ MX51_PAD_USBH1_STP__USBH1_STP,
+ MX51_PAD_EIM_CS3__GPIO_2_28, /* PHY nRESET */
+
+ /* FEC */
+ MX51_PAD_EIM_DTACK__GPIO_2_31, /* PHY nRESET */
+
+ /* HSI2C */
+ MX51_PAD_I2C1_CLK__GPIO_4_16,
+ MX51_PAD_I2C1_DAT__GPIO_4_17,
+
+ /* CAN */
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+ MX51_PAD_CSPI1_SS0__GPIO_4_24, /* nCS */
+ MX51_PAD_CSI2_PIXCLK__GPIO_4_15, /* nReset */
+ MX51_PAD_GPIO_1_1__GPIO_1_1, /* IRQ */
+ MX51_PAD_GPIO_1_4__GPIO_1_4, /* Control signals */
+ MX51_PAD_GPIO_1_6__GPIO_1_6,
+ MX51_PAD_GPIO_1_7__GPIO_1_7,
+ MX51_PAD_GPIO_1_8__GPIO_1_8,
+ MX51_PAD_GPIO_1_9__GPIO_1_9,
+
+ /* Touchscreen */
+ CPUIMX51SD_GPIO_3_12, /* IRQ */
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int ts_get_pendown_state(void)
+{
+ return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+ .model = 2007,
+ .x_plate_ohms = 180,
+ .get_pendown_state = ts_get_pendown_state,
+};
+
+static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ }, {
+ I2C_BOARD_INFO("tsc2007", 0x49),
+ .type = "tsc2007",
+ .platform_data = &tsc2007_info,
+ .irq = gpio_to_irq(TSC2007_IRQGPIO),
+ },
+};
+
+static const struct mxc_nand_platform_data
+ eukrea_cpuimx51sd_nand_board_info __initconst = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+ u32 v;
+ void __iomem *usb_base;
+ void __iomem *usbother_base;
+
+ usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+ /* Set the PHY clock to 19.2MHz */
+ v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+ v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+ v |= MX51_USB_PLL_DIV_19_2_MHZ;
+ __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+ iounmap(usb_base);
+ return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+ u32 v;
+ void __iomem *usb_base;
+ void __iomem *usbother_base;
+
+ usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+ /* The clock for the USBH1 ULPI port will come from the PHY. */
+ v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+ __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
+ usbother_base + MX51_USB_CTRL_1_OFFSET);
+ iounmap(usb_base);
+ return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+ .init = initialize_otg_port,
+ .portsc = MXC_EHCI_UTMI_16BIT,
+ .flags = MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+ .init = initialize_usbh1_port,
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx51sd_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = I2C_SDA,
+ .sda_is_open_drain = 0,
+ .scl_pin = I2C_SCL,
+ .scl_is_open_drain = 0,
+ .udelay = 2,
+};
+
+static struct platform_device hsi2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev.platform_data = &pdata,
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+ .oscillator_frequency = 24E6,
+};
+
+static struct spi_board_info cpuimx51sd_spi_device[] = {
+ {
+ .modalias = "mcp2515",
+ .max_speed_hz = 6500000,
+ .bus_num = 0,
+ .mode = SPI_MODE_0,
+ .chip_select = 0,
+ .platform_data = &mcp251x_info,
+ .irq = gpio_to_irq(0 * 32 + 1)
+ },
+};
+
+static int cpuimx51sd_spi1_cs[] = {
+ CAN_NCS,
+};
+
+static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
+ .chipselect = cpuimx51sd_spi1_cs,
+ .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs),
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &hsi2c_gpio_device,
+};
+
+static void __init eukrea_cpuimx51sd_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
+ ARRAY_SIZE(eukrea_cpuimx51sd_pads));
+
+ imx51_add_imx_uart(0, &uart_pdata);
+ imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
+
+ gpio_request(ETH_RST, "eth_rst");
+ gpio_set_value(ETH_RST, 1);
+ imx51_add_fec(NULL);
+
+ gpio_request(CAN_IRQGPIO, "can_irq");
+ gpio_direction_input(CAN_IRQGPIO);
+ gpio_free(CAN_IRQGPIO);
+ gpio_request(CAN_NCS, "can_ncs");
+ gpio_direction_output(CAN_NCS, 1);
+ gpio_free(CAN_NCS);
+ gpio_request(CAN_RST, "can_rst");
+ gpio_direction_output(CAN_RST, 0);
+ msleep(20);
+ gpio_set_value(CAN_RST, 1);
+ imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
+ spi_register_board_info(cpuimx51sd_spi_device,
+ ARRAY_SIZE(cpuimx51sd_spi_device));
+
+ gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
+ gpio_direction_input(TSC2007_IRQGPIO);
+ gpio_free(TSC2007_IRQGPIO);
+
+ i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
+ ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ if (otg_mode_host)
+ mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ else {
+ initialize_otg_port(NULL);
+ mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+ }
+
+ gpio_request(USBH1_RST, "usb_rst");
+ gpio_direction_output(USBH1_RST, 0);
+ msleep(20);
+ gpio_set_value(USBH1_RST, 1);
+ mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
+ eukrea_mbimxsd51_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx51sd_timer_init(void)
+{
+ mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+ .init = eukrea_cpuimx51sd_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
+ /* Maintainer: Eric Bénard <eric@eukrea.com> */
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx51_map_io,
+ .init_irq = mx51_init_irq,
+ .init_machine = eukrea_cpuimx51sd_init,
+ .timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index f95c2fd9466..79ce8dcf3cd 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -21,12 +22,13 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx51.h>
-#include <mach/imx-uart.h>
#include <mach/3ds_debugboard.h>
+#include "devices-imx51.h"
#include "devices.h"
#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
static struct pad_desc mx51_3ds_pads[] = {
/* UART1 */
@@ -61,19 +63,25 @@ static struct pad_desc mx51_3ds_pads[] = {
MX51_PAD_KEY_COL3__KEY_COL3,
MX51_PAD_KEY_COL4__KEY_COL4,
MX51_PAD_KEY_COL5__KEY_COL5,
+
+ /* eCSPI2 */
+ MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
+ MX51_PAD_NANDF_RB3__ECSPI2_MISO,
+ MX51_PAD_NANDF_D15__ECSPI2_MOSI,
+ MX51_PAD_NANDF_D12__GPIO_3_28,
};
/* Serial ports */
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mxc_init_imx_uart(void)
{
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ imx51_add_imx_uart(0, &uart_pdata);
+ imx51_add_imx_uart(1, &uart_pdata);
+ imx51_add_imx_uart(2, &uart_pdata);
}
#else /* !SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
@@ -127,6 +135,26 @@ static inline void mxc_init_keypad(void)
}
#endif
+static int mx51_3ds_spi2_cs[] = {
+ MXC_SPI_CS(0),
+ MX51_3DS_ECSPI2_CS,
+};
+
+static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
+ .chipselect = mx51_3ds_spi2_cs,
+ .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs),
+};
+
+static struct spi_board_info mx51_3ds_spi_nor_device[] = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .mode = SPI_MODE_0,
+ .platform_data = NULL,},
+};
+
/*
* Board specific initialization.
*/
@@ -136,6 +164,10 @@ static void __init mxc_board_init(void)
ARRAY_SIZE(mx51_3ds_pads));
mxc_init_imx_uart();
+ imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
+ spi_register_board_info(mx51_3ds_spi_nor_device,
+ ARRAY_SIZE(mx51_3ds_spi_nor_device));
+
if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
printk(KERN_WARNING "Init of the debugboard failed, all "
"devices on the board are unusable.\n");
@@ -154,8 +186,6 @@ static struct sys_timer mxc_timer = {
MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = MX51_AIPS1_BASE_ADDR,
- .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 6e384d92e62..0821fe9b3b2 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -17,12 +17,11 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/fsl_devices.h>
+#include <linux/fec.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
#include <mach/mxc_ehci.h>
#include <asm/irq.h>
@@ -31,11 +30,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "devices-imx51.h"
#include "devices.h"
#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */
#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
-#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */
+#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */
+#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
@@ -45,10 +46,6 @@
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02
-static struct platform_device *devices[] __initdata = {
- &mxc_fec_device,
-};
-
static struct pad_desc mx51babbage_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
@@ -93,19 +90,41 @@ static struct pad_desc mx51babbage_pads[] = {
/* USB HUB reset line*/
MX51_PAD_GPIO_1_7__GPIO_1_7,
+
+ /* FEC */
+ MX51_PAD_EIM_EB2__FEC_MDIO,
+ MX51_PAD_EIM_EB3__FEC_RDAT1,
+ MX51_PAD_EIM_CS2__FEC_RDAT2,
+ MX51_PAD_EIM_CS3__FEC_RDAT3,
+ MX51_PAD_EIM_CS4__FEC_RX_ER,
+ MX51_PAD_EIM_CS5__FEC_CRS,
+ MX51_PAD_NANDF_RB2__FEC_COL,
+ MX51_PAD_NANDF_RB3__FEC_RXCLK,
+ MX51_PAD_NANDF_RB6__FEC_RDAT0,
+ MX51_PAD_NANDF_RB7__FEC_TDAT0,
+ MX51_PAD_NANDF_CS2__FEC_TX_ER,
+ MX51_PAD_NANDF_CS3__FEC_MDC,
+ MX51_PAD_NANDF_CS4__FEC_TDAT1,
+ MX51_PAD_NANDF_CS5__FEC_TDAT2,
+ MX51_PAD_NANDF_CS6__FEC_TDAT3,
+ MX51_PAD_NANDF_CS7__FEC_TX_EN,
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
+
+ /* FEC PHY reset line */
+ MX51_PAD_EIM_A20__GPIO_2_14,
};
/* Serial ports */
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mxc_init_imx_uart(void)
{
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ imx51_add_imx_uart(0, &uart_pdata);
+ imx51_add_imx_uart(1, &uart_pdata);
+ imx51_add_imx_uart(2, &uart_pdata);
}
#else /* !SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
@@ -113,7 +132,7 @@ static inline void mxc_init_imx_uart(void)
}
#endif /* SERIAL_IMX */
-static struct imxi2c_platform_data babbage_i2c_data = {
+static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
.bitrate = 100000,
};
@@ -171,6 +190,22 @@ static inline void babbage_usbhub_reset(void)
gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
}
+static inline void babbage_fec_reset(void)
+{
+ int ret;
+
+ /* reset FEC PHY */
+ ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+ if (ret) {
+ printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+ return;
+ }
+ gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
+ gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
+ msleep(1);
+ gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
+}
+
/* This function is board specific as the bit mask for the plldiv will also
be different for other Freescale SoCs, thus a common bitmask is not
possible and cannot get place in /plat-mxc/ehci.c.*/
@@ -178,7 +213,7 @@ static int initialize_otg_port(struct platform_device *pdev)
{
u32 v;
void __iomem *usb_base;
- u32 usbother_base;
+ void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -196,7 +231,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
{
u32 v;
void __iomem *usb_base;
- u32 usbother_base;
+ void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -250,10 +285,11 @@ static void __init mxc_board_init(void)
mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
ARRAY_SIZE(mx51babbage_pads));
mxc_init_imx_uart();
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ babbage_fec_reset();
+ imx51_add_fec(NULL);
- mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data);
- mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data);
+ imx51_add_imx_i2c(0, &babbage_i2c_data);
+ imx51_add_imx_i2c(1, &babbage_i2c_data);
mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
if (otg_mode_host)
@@ -281,9 +317,7 @@ static struct sys_timer mxc_timer = {
MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
- .phys_io = MX51_AIPS1_BASE_ADDR,
- .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MX51_PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
new file mode 100644
index 00000000000..6e623bda3ee
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2010 Linaro Limited
+ *
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define MX51_USB_PLL_DIV_24_MHZ 0x01
+
+static struct pad_desc mx51efikamx_pads[] = {
+ /* UART1 */
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ MX51_PAD_UART1_RTS__UART1_RTS,
+ MX51_PAD_UART1_CTS__UART1_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static const struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ imx51_add_imx_uart(0, &uart_pdata);
+ imx51_add_imx_uart(1, &uart_pdata);
+ imx51_add_imx_uart(2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/* This function is board specific as the bit mask for the plldiv will also
+ * be different for other Freescale SoCs, thus a common bitmask is not
+ * possible and cannot get place in /plat-mxc/ehci.c.
+ */
+static int initialize_otg_port(struct platform_device *pdev)
+{
+ u32 v;
+ void __iomem *usb_base;
+ void __iomem *usbother_base;
+ usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
+
+ /* Set the PHY clock to 19.2MHz */
+ v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+ v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+ v |= MX51_USB_PLL_DIV_24_MHZ;
+ __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+ iounmap(usb_base);
+ return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+ .init = initialize_otg_port,
+ .portsc = MXC_EHCI_UTMI_16BIT,
+ .flags = MXC_EHCI_INTERNAL_PHY,
+};
+
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
+ ARRAY_SIZE(mx51efikamx_pads));
+ mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ mxc_init_imx_uart();
+}
+
+static void __init mx51_efikamx_timer_init(void)
+{
+ mx51_clocks_init(32768, 24000000, 22579200, 24576000);
+}
+
+static struct sys_timer mxc_timer = {
+ .init = mx51_efikamx_timer_init,
+};
+
+MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
+ /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
+ .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .map_io = mx51_map_io,
+ .init_irq = mx51_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 57c10a9926c..f2aae92cf0e 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -41,34 +41,66 @@ static struct clk usboh3_clk;
#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
-static int _clk_ccgr_enable(struct clk *clk)
+/* calculate best pre and post dividers to get the required divider */
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
+ u32 max_pre, u32 max_post)
{
- u32 reg;
+ if (div >= max_pre * max_post) {
+ *pre = max_pre;
+ *post = max_post;
+ } else if (div >= max_pre) {
+ u32 min_pre, temp_pre, old_err, err;
+ min_pre = DIV_ROUND_UP(div, max_post);
+ old_err = max_pre;
+ for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
+ err = div % temp_pre;
+ if (err == 0) {
+ *pre = temp_pre;
+ break;
+ }
+ err = temp_pre - err;
+ if (err < old_err) {
+ old_err = err;
+ *pre = temp_pre;
+ }
+ }
+ *post = DIV_ROUND_UP(div, *pre);
+ } else {
+ *pre = div;
+ *post = 1;
+ }
+}
+
+static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
+{
+ u32 reg = __raw_readl(clk->enable_reg);
+
+ reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+ reg |= mode << clk->enable_shift;
- reg = __raw_readl(clk->enable_reg);
- reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
__raw_writel(reg, clk->enable_reg);
+}
+static int _clk_ccgr_enable(struct clk *clk)
+{
+ _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
return 0;
}
static void _clk_ccgr_disable(struct clk *clk)
{
- u32 reg;
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
+ _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
+}
+static int _clk_ccgr_enable_inrun(struct clk *clk)
+{
+ _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
+ return 0;
}
static void _clk_ccgr_disable_inwait(struct clk *clk)
{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
- reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
+ _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
}
/*
@@ -542,60 +574,60 @@ static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
return 0;
}
-static unsigned long clk_uart_get_rate(struct clk *clk)
-{
- u32 reg, prediv, podf;
- unsigned long parent_rate;
+#define clk_nfc_set_parent NULL
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CSCDR1);
- prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
- MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
- podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
- MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+ u32 reg, div;
- return parent_rate / (prediv * podf);
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
+ MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
+ rate = clk_get_rate(clk->parent) / div;
+ WARN_ON(rate == 0);
+ return rate;
}
-static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+static unsigned long clk_nfc_round_rate(struct clk *clk,
+ unsigned long rate)
{
- u32 reg, mux;
+ u32 div;
+ unsigned long parent_rate = clk_get_rate(clk->parent);
- mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
- &lp_apm_clk);
- reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
- reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
- __raw_writel(reg, MXC_CCM_CSCMR1);
+ if (!rate)
+ return -EINVAL;
- return 0;
-}
+ div = parent_rate / rate;
-static unsigned long clk_usboh3_get_rate(struct clk *clk)
-{
- u32 reg, prediv, podf;
- unsigned long parent_rate;
+ if (parent_rate % rate)
+ div++;
- parent_rate = clk_get_rate(clk->parent);
+ if (div > 8)
+ return -EINVAL;
- reg = __raw_readl(MXC_CCM_CSCDR1);
- prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >>
- MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1;
- podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >>
- MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1;
+ return parent_rate / div;
- return parent_rate / (prediv * podf);
}
-static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent)
+static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
{
- u32 reg, mux;
+ u32 reg, div;
+
+ div = clk_get_rate(clk->parent) / rate;
+ if (div == 0)
+ div++;
+ if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
+ return -EINVAL;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
+ reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_CBCDR);
- mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
- &lp_apm_clk);
- reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK;
- reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET;
- __raw_writel(reg, MXC_CCM_CSCMR1);
+ while (__raw_readl(MXC_CCM_CDHIPR) &
+ MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
+ }
return 0;
}
@@ -620,6 +652,17 @@ static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
return ckih2_reference;
}
+static unsigned long clk_emi_slow_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
+ MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
+
+ return clk_get_rate(clk->parent) / div;
+}
+
/* External high frequency clock */
static struct clk ckih_clk = {
.get_rate = get_high_reference_clock_rate,
@@ -715,18 +758,6 @@ static struct clk ipg_perclk = {
.set_parent = _clk_ipg_per_set_parent,
};
-static struct clk uart_root_clk = {
- .parent = &pll2_sw_clk,
- .get_rate = clk_uart_get_rate,
- .set_parent = _clk_uart_set_parent,
-};
-
-static struct clk usboh3_clk = {
- .parent = &pll2_sw_clk,
- .get_rate = clk_usboh3_get_rate,
- .set_parent = _clk_usboh3_set_parent,
-};
-
static struct clk ahb_max_clk = {
.parent = &ahb_clk,
.enable_reg = MXC_CCM_CCGR0,
@@ -762,45 +793,183 @@ static struct clk kpp_clk = {
.id = 0,
};
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
+static struct clk emi_slow_clk = {
+ .parent = &pll2_sw_clk,
+ .enable_reg = MXC_CCM_CCGR5,
+ .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+ .get_rate = clk_emi_slow_get_rate,
+};
+
+#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \
static struct clk name = { \
.id = i, \
.enable_reg = er, \
.enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
+ .get_rate = pfx##_get_rate, \
+ .set_rate = pfx##_set_rate, \
+ .round_rate = pfx##_round_rate, \
+ .set_parent = pfx##_set_parent, \
.enable = _clk_ccgr_enable, \
.disable = _clk_ccgr_disable, \
.parent = p, \
.secondary = s, \
}
-/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
- get_rate, set_rate, parent, secondary); */
+#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = pfx##_get_rate, \
+ .set_rate = pfx##_set_rate, \
+ .set_parent = pfx##_set_parent, \
+ .enable = _clk_max_enable, \
+ .disable = _clk_max_disable, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+#define CLK_GET_RATE(name, nr, bitsname) \
+static unsigned long clk_##name##_get_rate(struct clk *clk) \
+{ \
+ u32 reg, pred, podf; \
+ \
+ reg = __raw_readl(MXC_CCM_CSCDR##nr); \
+ pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK) \
+ >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \
+ podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK) \
+ >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \
+ \
+ return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), \
+ (pred + 1) * (podf + 1)); \
+}
+
+#define CLK_SET_PARENT(name, nr, bitsname) \
+static int clk_##name##_set_parent(struct clk *clk, struct clk *parent) \
+{ \
+ u32 reg, mux; \
+ \
+ mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, \
+ &pll3_sw_clk, &lp_apm_clk); \
+ reg = __raw_readl(MXC_CCM_CSCMR##nr) & \
+ ~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK; \
+ reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET; \
+ __raw_writel(reg, MXC_CCM_CSCMR##nr); \
+ \
+ return 0; \
+}
+
+#define CLK_SET_RATE(name, nr, bitsname) \
+static int clk_##name##_set_rate(struct clk *clk, unsigned long rate) \
+{ \
+ u32 reg, div, parent_rate; \
+ u32 pre = 0, post = 0; \
+ \
+ parent_rate = clk_get_rate(clk->parent); \
+ div = parent_rate / rate; \
+ \
+ if ((parent_rate / div) != rate) \
+ return -EINVAL; \
+ \
+ __calc_pre_post_dividers(div, &pre, &post, \
+ (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >> \
+ MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1, \
+ (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >> \
+ MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
+ \
+ /* Set sdhc1 clock divider */ \
+ reg = __raw_readl(MXC_CCM_CSCDR##nr) & \
+ ~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK \
+ | MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK); \
+ reg |= (post - 1) << \
+ MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \
+ reg |= (pre - 1) << \
+ MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \
+ __raw_writel(reg, MXC_CCM_CSCDR##nr); \
+ \
+ return 0; \
+}
+
+/* UART */
+CLK_GET_RATE(uart, 1, UART)
+CLK_SET_PARENT(uart, 1, UART)
+
+static struct clk uart_root_clk = {
+ .parent = &pll2_sw_clk,
+ .get_rate = clk_uart_get_rate,
+ .set_parent = clk_uart_set_parent,
+};
+
+/* USBOH3 */
+CLK_GET_RATE(usboh3, 1, USBOH3)
+CLK_SET_PARENT(usboh3, 1, USBOH3)
+
+static struct clk usboh3_clk = {
+ .parent = &pll2_sw_clk,
+ .get_rate = clk_usboh3_get_rate,
+ .set_parent = clk_usboh3_set_parent,
+};
+
+/* eCSPI */
+CLK_GET_RATE(ecspi, 2, CSPI)
+CLK_SET_PARENT(ecspi, 1, CSPI)
+
+static struct clk ecspi_main_clk = {
+ .parent = &pll3_sw_clk,
+ .get_rate = clk_ecspi_get_rate,
+ .set_parent = clk_ecspi_set_parent,
+};
+
+/* eSDHC */
+CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
+CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
+CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
+
+CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
+CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
+CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
+
+#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = e, \
+ .disable = d, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
+ DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
/* Shared peripheral bus arbiter */
DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
NULL, NULL, &ipg_clk, NULL);
/* UART */
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, &uart_root_clk, NULL);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &uart_root_clk, NULL);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &uart_root_clk, NULL);
DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
NULL, NULL, &ipg_clk, &aips_tz1_clk);
DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
NULL, NULL, &ipg_clk, &aips_tz1_clk);
DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
NULL, NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart1_ipg_clk);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart2_ipg_clk);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart3_ipg_clk);
/* GPT */
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &ipg_clk, &gpt_ipg_clk);
/* I2C */
DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -814,6 +983,52 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+/* NFC */
+DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
+ clk_nfc, &emi_slow_clk, NULL);
+
+/* SSI */
+DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
+DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
+ NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
+
+/* eCSPI */
+DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+ &ipg_clk, &spba_clk);
+DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
+ NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
+DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
+ NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+ &ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
+ NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
+
+/* CSPI */
+DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
+ NULL, NULL, &ipg_clk, &cspi_ipg_clk);
+
+/* SDMA */
+DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
+ NULL, NULL, &ahb_clk, NULL);
+
+/* eSDHC */
+DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
+ NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
+ clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
+DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
+ NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
+ clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -837,6 +1052,18 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
+ _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+ _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+ _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
+ _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
+ _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
+ _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
+ _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
};
static void clk_tree_init(void)
@@ -880,6 +1107,14 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
/* set the usboh3_clk parent to pll2_sw_clk */
clk_set_parent(&usboh3_clk, &pll2_sw_clk);
+ /* Set SDHC parents to be PLL2 */
+ clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
+ clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
+
+ /* set SDHC root clock as 166.25MHZ*/
+ clk_set_rate(&esdhc1_clk, 166250000);
+ clk_set_rate(&esdhc2_clk, 166250000);
+
/* System timer */
mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
MX51_MXC_INT_GPT);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 2d37785e385..eaacb6e9b5d 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -70,6 +70,25 @@ int mx51_revision(void)
}
EXPORT_SYMBOL(mx51_revision);
+#ifdef CONFIG_NEON
+
+/*
+ * All versions of the silicon before Rev. 3 have broken NEON implementations.
+ * Dependent on link order - so the assumption is that vfp_init is called
+ * before us.
+ */
+static int __init mx51_neon_fixup(void)
+{
+ if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) {
+ elf_hwcap &= ~HWCAP_NEON;
+ pr_info("Turning off NEON support, detected broken NEON implementation\n");
+ }
+ return 0;
+}
+
+late_initcall(mx51_neon_fixup);
+#endif
+
static int __init post_cpu_init(void)
{
unsigned int reg;
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
new file mode 100644
index 00000000000..5cc910e6053
--- /dev/null
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx51.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx51_fec_data __initconst;
+#define imx51_add_fec(pdata) \
+ imx_add_fec(&imx51_fec_data, pdata)
+
+extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
+#define imx51_add_imx_i2c(id, pdata) \
+ imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+
+extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst;
+#define imx51_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst;
+#define imx51_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
+
+extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst;
+#define imx51_add_mxc_nand(pdata) \
+ imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
+#define imx51_add_cspi(pdata) \
+ imx_add_spi_imx(&imx51_cspi_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
+#define imx51_add_ecspi(id, pdata) \
+ imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
+
+extern const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst;
+#define imx51_add_esdhc(id, pdata) \
+ imx_add_esdhc(&imx51_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 1920ff4963b..4c7be87a7c9 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -17,120 +17,6 @@
#include <mach/imx-uart.h>
#include <mach/irqs.h>
-static struct resource uart0[] = {
- {
- .start = MX51_UART1_BASE_ADDR,
- .end = MX51_UART1_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_UART1,
- .end = MX51_MXC_INT_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device0 = {
- .name = "imx-uart",
- .id = 0,
- .resource = uart0,
- .num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
- {
- .start = MX51_UART2_BASE_ADDR,
- .end = MX51_UART2_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_UART2,
- .end = MX51_MXC_INT_UART2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device1 = {
- .name = "imx-uart",
- .id = 1,
- .resource = uart1,
- .num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
- {
- .start = MX51_UART3_BASE_ADDR,
- .end = MX51_UART3_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_UART3,
- .end = MX51_MXC_INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device2 = {
- .name = "imx-uart",
- .id = 2,
- .resource = uart2,
- .num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource mxc_fec_resources[] = {
- {
- .start = MX51_MXC_FEC_BASE_ADDR,
- .end = MX51_MXC_FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_FEC,
- .end = MX51_MXC_INT_FEC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_fec_device = {
- .name = "fec",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_fec_resources),
- .resource = mxc_fec_resources,
-};
-
-static struct resource mxc_i2c0_resources[] = {
- {
- .start = MX51_I2C1_BASE_ADDR,
- .end = MX51_I2C1_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_I2C1,
- .end = MX51_MXC_INT_I2C1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_i2c_device0 = {
- .name = "imx-i2c",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_i2c0_resources),
- .resource = mxc_i2c0_resources,
-};
-
-static struct resource mxc_i2c1_resources[] = {
- {
- .start = MX51_I2C2_BASE_ADDR,
- .end = MX51_I2C2_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX51_MXC_INT_I2C2,
- .end = MX51_MXC_INT_I2C2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_i2c_device1 = {
- .name = "imx-i2c",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_i2c1_resources),
- .resource = mxc_i2c1_resources,
-};
-
static struct resource mxc_hsi2c_resources[] = {
{
.start = MX51_HSI2C_DMA_BASE_ADDR,
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index e509cfaad1d..af1d07c0bbc 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -1,12 +1,6 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_fec_device;
extern struct platform_device mxc_usbdr_host_device;
extern struct platform_device mxc_usbh1_device;
extern struct platform_device mxc_usbdr_udc_device;
extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_hsi2c_device;
extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index ffa93d1d6ef..a2e6e8c39d2 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -30,6 +30,7 @@
#include <asm/mach/arch.h>
+#include "devices-imx51.h"
#include "devices.h"
#define MBIMX51_TSC2007_GPIO (2*32 + 30)
@@ -112,9 +113,25 @@ static struct pad_desc mbimx51_pads[] = {
MX51_PAD_KEY_COL1__KEY_COL1,
MX51_PAD_KEY_COL2__KEY_COL2,
MX51_PAD_KEY_COL3__KEY_COL3,
+
+ /* SD 1 */
+ MX51_PAD_SD1_CMD__SD1_CMD,
+ MX51_PAD_SD1_CLK__SD1_CLK,
+ MX51_PAD_SD1_DATA0__SD1_DATA0,
+ MX51_PAD_SD1_DATA1__SD1_DATA1,
+ MX51_PAD_SD1_DATA2__SD1_DATA2,
+ MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+ /* SD 2 */
+ MX51_PAD_SD2_CMD__SD2_CMD,
+ MX51_PAD_SD2_CLK__SD2_CLK,
+ MX51_PAD_SD2_DATA0__SD2_DATA0,
+ MX51_PAD_SD2_DATA1__SD2_DATA1,
+ MX51_PAD_SD2_DATA2__SD2_DATA2,
+ MX51_PAD_SD2_DATA3__SD2_DATA3,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -158,9 +175,11 @@ struct tsc2007_platform_data tsc2007_data = {
static struct i2c_board_info mbimx51_i2c_devices[] = {
{
- I2C_BOARD_INFO("tsc2007", 0x48),
+ I2C_BOARD_INFO("tsc2007", 0x49),
.irq = MBIMX51_TSC2007_IRQ,
.platform_data = &tsc2007_data,
+ }, {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
},
};
@@ -172,8 +191,8 @@ void __init eukrea_mbimx51_baseboard_init(void)
mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
ARRAY_SIZE(mbimx51_pads));
- mxc_register_device(&mxc_uart_device1, NULL);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ imx51_add_imx_uart(1, NULL);
+ imx51_add_imx_uart(2, &uart_pdata);
gpio_request(MBIMX51_LED0, "LED0");
gpio_direction_output(MBIMX51_LED0, 1);
@@ -197,4 +216,7 @@ void __init eukrea_mbimx51_baseboard_init(void)
set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
i2c_register_board_info(1, mbimx51_i2c_devices,
ARRAY_SIZE(mbimx51_i2c_devices));
+
+ imx51_add_esdhc(0, NULL);
+ imx51_add_esdhc(1, NULL);
}
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 00000000000..2b48f519083
--- /dev/null
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+#include <mach/audmux.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \
+ MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+ /* LED */
+ MX51_PAD_NANDF_D10__GPIO_3_30,
+ /* SWITCH */
+ MBIMXSD_GPIO_3_31,
+ /* UART2 */
+ MX51_PAD_UART2_RXD__UART2_RXD,
+ MX51_PAD_UART2_TXD__UART2_TXD,
+ /* UART 3 */
+ MX51_PAD_UART3_RXD__UART3_RXD,
+ MX51_PAD_UART3_TXD__UART3_TXD,
+ MX51_PAD_KEY_COL4__UART3_RTS,
+ MX51_PAD_KEY_COL5__UART3_CTS,
+ /* SD */
+ MX51_PAD_SD1_CMD__SD1_CMD,
+ MX51_PAD_SD1_CLK__SD1_CLK,
+ MX51_PAD_SD1_DATA0__SD1_DATA0,
+ MX51_PAD_SD1_DATA1__SD1_DATA1,
+ MX51_PAD_SD1_DATA2__SD1_DATA2,
+ MX51_PAD_SD1_DATA3__SD1_DATA3,
+};
+
+#define GPIO_LED1 (2 * 32 + 30)
+#define GPIO_SWITCH1 (2 * 32 + 31)
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ .gpio = GPIO_LED1,
+ },
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+ .leds = eukrea_mbimxsd_leds,
+ .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &eukrea_mbimxsd_led_info,
+ },
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+ {
+ .gpio = GPIO_SWITCH1,
+ .code = BTN_0,
+ .desc = "BP1",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+ .buttons = eukrea_mbimxsd_gpio_buttons,
+ .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &eukrea_mbimxsd_button_data,
+ }
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &eukrea_mbimxsd_leds_gpio,
+ &eukrea_mbimxsd_button_device,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx51sd init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd51_baseboard_init(void)
+{
+ if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+ ARRAY_SIZE(eukrea_mbimxsd_pads)))
+ printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+ imx51_add_imx_uart(1, NULL);
+ imx51_add_imx_uart(2, &uart_pdata);
+
+ imx51_add_esdhc(0, NULL);
+
+ gpio_request(GPIO_LED1, "LED1");
+ gpio_direction_output(GPIO_LED1, 1);
+ gpio_free(GPIO_LED1);
+
+ gpio_request(GPIO_SWITCH1, "SWITCH1");
+ gpio_direction_input(GPIO_SWITCH1);
+ gpio_free(GPIO_SWITCH1);
+
+ i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+ ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 08:53:09 +0000